EN 62035:2014
Current
The latest, up-to-date edition.
Discharge lamps (excluding fluorescent lamps) - Safety specifications
05-12-2014
FOREWORD
1 Scope
2 Normative references
3 Definitions
4 General safety requirements
5 Particular safety requirements
6 Information for luminaire design
7 Assessment
Annex A (normative) - List of lamp caps and gauges
Annex B (normative) - Pull and torsion test values
Annex C (normative) - Torsion test holders
Annex D (normative) - Information for thermal tests
Annex E (normative) - Measurement of pulse height for lamps
with internal starting device
Annex F (informative) - Information for luminaire design
Annex G (normative) - Conditions of compliance for design
tests
Annex H (normative) - Symbols
Annex I (normative) - Containment testing procedure
for metal halide lamps with quartz arc tubes
Annex J (normative) - Containment testing procedure for
metal halide lamps with ceramic arc tubes
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
IEC 62035:2014 specifies the safety requirements for discharge lamps (excluding fluorescent lamps) for general lighting purposes. This International Standard is applicable to low-pressure sodium vapour lamps and to high-intensity discharge (HID) lamps, i.e. high-pressure mercury vapour lamps (including blended lamps), high-pressure sodium vapour lamps and metal halide lamps. It applies to single- and double-capped lamps, having caps as listed in Annex A.This standard only concerns safety criteria and does not take into account performance. The performance standards IEC 60188, IEC 60192, IEC 60662, IEC 61167 and IEC 61549 should be referred to for such characteristics.It may be expected that lamps which comply with this standard will operate safely at supply voltages between 90 % and 110 % of rated supply voltage and when operated with a ballast complying with IEC 61347-2-9 and IEC 60923, with a starting device complying with IEC 61347-2-1 and IEC 60927, and in a luminaire complying with IEC 60598-1.This second edition cancels and replaces the first edition published in 1999, AMD1:2003 and AMD2:2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition. Photobiological safety requirements are taken care of on basis of the risk group concept of IEC 62471 and the technical report IEC TR 62778 on blue light hazard. This has consequences for terms, marking, structure of 4.6, and introduction of a new symbol "Caution, do not stare at light source". Special attention is given to blue light hazard.
Committee |
CLC/TC 34
|
DevelopmentNote |
Supersedes EN 60188:1988, EN 60192:1993, EN 60662:1993 and EN 61167:1994 (12/2001)
|
DocumentType |
Standard
|
PublisherName |
European Committee for Standards - Electrical
|
Status |
Current
|
Standards | Relationship |
NBN EN 62035 : 2015 | Identical |
UNE-EN 62035:2015 | Identical |
CEI EN 62035 : 2016 | Identical |
SN EN 62035 : 2014 | Identical |
PN EN 62035 : 2015 | Identical |
DIN EN 62035 : 2021-01 | Identical |
OVE/ONORM EN 62035 : 2015 | Identical |
I.S. EN 62035:2014 | Identical |
NEN EN IEC 62035 : 2014 | Identical |
BS EN 62035:2014 | Identical |
DIN EN 62035 : 2015 | Identical |
VDE 0715-10 : 2015 | Identical |
NF EN 62035 : 2017 | Identical |
UNE-EN 61347-2-9:2013 | Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
I.S. EN 61347-2-9:2013 | LAMP CONTROLGEAR - PART 2-9: PARTICULAR REQUIREMENTS FOR ELECTROMAGNETIC CONTROLGEAR FOR DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) (IEC 61347-2-9:2012 (EQV)) |
I.S. EN 60079-7:2015 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' |
CEI EN 60188 : 2002 | HIGH PRESSURE MERCURY VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS |
BS EN 61347-2-9:2013 | Lamp controlgear Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
EN IEC 60079-7:2015/A1:2018 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015/A1:2017) |
EN 60662:2012 | High-pressure sodium vapour lamps - Performance specifications |
EN 61347-2-9:2013 | Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
I.S. EN 61167:2016 | METAL HALIDE LAMPS - PERFORMANCE SPECIFICATION |
CEI 34-119 : 2010 | GUIDE FOR LUMINAIRE DESIGN - INFORMATION FOR A SAFE AND CORRECT OPERATION OF THE LIGHT SOURCES |
BS EN 60662:2012+A11:2019 | High-pressure sodium vapour lamps. Performance specifications |
BS EN 61167:2011 | Metal halide lamps. Performance specification |
BS EN 60079-7 : 2015 | EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015) |
BS EN 60188:2001 | High-pressure mercury vapour lamps. Performance specifications |
15/30333423 DC : 0 | BS EN 61167:2014/PRAA:2015 - METAL HALIDE LAMPS - PERFORMANCE SPECIFICATION |
BS EN 60192:2001 | Low pressure sodium vapour lamps. Performance specification |
BS EN 60598-1:2015 | Luminaires General requirements and tests |
EN 61167:2016 | Metal halide lamps - Performance specification |
CEI EN 60192 : 2002 | LOW PRESSURE SODIUM VAPOUR LAMPS PERFORMANCE REQUIREMENTS |
CEI EN 61347-2-9 : 2013 | LAMP CONTROLGEAR - PART 2-9: PARTICULAR REQUIREMENTS FOR ELECTROMAGNETIC CONTROLGEAR FOR DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) |
I.S. EN 60598-1:2015 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
UNE-EN 60598-1:2015 | Luminaires - Part 1: General requirements and tests |
CEI EN 60662 : 2013 | HIGH-PRESSURE SODIUM VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS |
EN 60598-1:2015/A1:2018 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
I.S. EN 60662:2012 | HIGH-PRESSURE SODIUM VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS (IEC 60662:2011 (MOD)) |
UNE-EN 60079-7:2016 | Explosive atmospheres - Part 7: Equipment protection by increased safety "e" |
IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV | Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
IEC 60061-3:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges |
IEC TR 62778:2014 | Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires |
IEC 60662:2011 | High-pressure sodium vapour lamps - Performance specifications |
IEC 61347-2-9:2012 | Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
IEC 60061-2:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders |
EN 61347-2-1:2001/A2:2014 | LAMP CONTROLGEAR - PART 2-1: PARTICULAR REQUIREMENTS FOR STARTING DEVICES (OTHER THAN GLOW STARTERS) (IEC 61347-2-1:2000/A2:2013) |
IEC 61347-2-1:2000+AMD1:2005+AMD2:2013 CSV | Lamp controlgear - Part 2-1: Particular requirements for startingdevices (other than glow starters) |
EN 60923:2005/A1:2006 | AUXILIARIES FOR LAMPS - BALLASTS FOR DISCHARGE LAMPS (EXCLUDING TUBULAR FLUORESCENT LAMPS) - PERFORMANCE REQUIREMENTS |
IEC 61167:2015 | Metal halide lamps - Performance specification |
IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
EN 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
IEC 60061-4:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information |
IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
IEC 60061-1:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps |
IEC 62471:2006 | Photobiological safety of lamps and lamp systems |
IEC 60927:2007+AMD1:2013 CSV | Auxiliaries for lamps - Starting devices (other than glow starters)- Performance requirements |
EN 60155:1995/A2:2007 | GLOW-STARTERS FOR FLUORESCENT LAMPS |
EN 60662:2012 | High-pressure sodium vapour lamps - Performance specifications |
ISO 4046-4:2002 | Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products |
IEC 60155:1993 | Glow-starters for fluorescent lamps |
IEC 60923:2005+AMD1:2006 CSV | Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements |
IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.