Customer Support: 131 242

  • Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 61672-2:2013/A1:2017

Current

Current

The latest, up-to-date edition.

ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS (IEC 61672-2:2013/A1:2017)

Amendment of

EN 61672-2:2013

Published date

07-07-2017

Sorry this product is not available in your region.

FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Submission for testing
5 Marking of the sound level meter and
   information in the Instruction Manual
6 Mandatory facilities and general requirements
7 Environmental, electrostatic, and radio-frequency
   tests
8 Radio-frequency emissions and public power
   supply disturbances
9 Electroacoustical performance tests
10 Pattern evaluation report
Bibliography
Annex ZA (normative) - Normative references to
         international publications with their
         corresponding European publications

Gives details of the tests necessary to verify conformance to all mandatory specifications given in IEC 61672-1 for time-weighting sound level meters, integrating-averaging sound level meters, and integrating sound level meters.

Committee
SR 29
DevelopmentNote
Together with EN 61672-1, it supersedes EN 60651 & EN 60804 (07/2003)
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Current
Supersedes

NF EN 15892 : 2011 RAILWAY APPLICATIONS - NOISE EMISSION - MEASUREMENT OF NOISE INSIDE DRIVER'S CABS
UNE-EN 16286-2:2014 Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements
I.S. EN 14035-22:2004 FIREWORKS - PART 22: MINES - SPECIFICATION AND TEST METHODS
PREN 12733 : DRAFT 2016 AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
BS EN 16232 : 2013 CHILD USE AND CARE ARTICLES - INFANT SWINGS
I.S. EN 14035-36:2004 FIREWORKS - PART 36: WHEELS - SPECIFICATION AND TEST METHODS
11/30252448 DC : 0 BS EN 1422 - STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
BS EN 62282-3-200:2016 Fuel cell technologies Stationary fuel cell power systems. Performance test methods
08/30182278 DC : 0 BS EN 1547:2001/A1 - INDUSTRIAL THERMOPROCESSING EQUIPMENT - NOISE TEST CODE FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT
PREN 14180 : DRAFT 2012 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
BS EN 61672-3:2013 Electroacoustics. Sound level meters Periodic tests
09/30187535 DC : 0 BS EN 13000 - CRANES - MOBILE CRANES
EEMUA 140 : 2014 NOISE PROCEDURE SPECIFICATION
I.S. EN 14035-20:2005 FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS
I.S. EN 62282-3-2:2006 FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
I.S. EN 62282-3-200:2016 FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
I.S. EN 14035-3:2004 FIREWORKS - PART 3: AERIAL WHEELS - SPECIFICATION AND TEST METHODS
I.S. EN 14035-5:2006 FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS
UNI EN 16232 : 2013 CHILD USE AND CARE ARTICLES - INFANT SWINGS
I.S. EN 15153-2:2013 RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES FOR TRAINS - PART 2: WARNING HORNS
BS EN 15153-2:2013 Railway applications. External visible and audible warning devices for trains Warning horns
BS EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing General requirements
BS EN 13141-2:2010 Ventilation for buildings. Performance testing of components/products for residential ventilation Exhaust and supply air terminal devices
BS EN 13000 : 2010 CRANES - MOBILE CRANES
DIN EN 14035-38:2006-05 FIREWORKS - PART 38: SHOT TUBES - SPECIFICATION AND TEST METHODS
EN 62585 : 2012 ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER (IEC 62585:2012)
EN 13141-2:2010 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices
EN 61672-3:2013 Electroacoustics - Sound level meters - Part 3: Periodic tests
EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
EN 62282-3-200:2016 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
EN 13544-1:2007+A1:2009 Respiratory therapy equipment - Part 1: Nebulizing systems and their components
PREN 1422 : DRAFT 2011 STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
DIN EN 14035-10:2004-11 FIREWORKS - PART 10: DOUBLE BANGERS - SPECIFICATION AND TEST METHODS
BS EN 62389:2006 Methods of measurement for DVD players
I.S. EN 16232:2013 CHILD USE AND CARE ARTICLES - INFANT SWINGS
12/30262894 DC : 0 BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
PD EN 14035-3:2004 Fireworks Aerial wheels. Specification and test methods
I.S. EN 13000:2010 Cranes - Mobile cranes
BS EN 61010-2-040:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
I.S. EN 15892:2011 RAILWAY APPLICATIONS - NOISE EMISSION - MEASUREMENT OF NOISE INSIDE DRIVER'S CABS
I.S. EN 61672-3:2013 ELECTROACOUSTICS - SOUND LEVEL METERS - PART 3: PERIODIC TESTS
EN 15153-2:2013 Railway applications - External visible and audible warning devices for trains - Part 2: Warning horns
EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
EN 61010-2-040:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040 Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
DIN EN 12941:2009-02 RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING
DIN EN 13000:2014-11 Cranes - Mobile Cranes; German version EN 13000:2010+A1:2014
DIN EN 1547:2010-02 Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment (includes Amendment A1:2009)
DIN EN 14035-28:2004-11 FIREWORKS - PART 28: ROMAN CANDLES - SPECIFICATION AND TEST METHODS
DIN EN 14035-22:2004-11 FIREWORKS - PART 22: MINES - SPECIFICATION AND TEST METHODS
DIN EN 13141-2:2010-12 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices
DIN EN 14035-9:2004-11 FIREWORKS - PART 9: CRACKLING GRANULES - SPECIFICATION AND TEST METHODS
DIN EN 14035-5:2006-05 FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS
DIN EN 14035-36:2004-11 FIREWORKS - PART 36: WHEELS - SPECIFICATION AND TEST METHODS
DIN EN 14035-3:2004-11 FIREWORKS - PART 3: AERIAL WHEELS - SPECIFICATION AND TEST METHODS
I.S. EN 1547:2001 Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
I.S. EN 13141-2:2010 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES
UNI EN 1547 : 2009 INDUSTRIAL THERMOPROCESSING EQUIPMENT - NOISE TEST CODE FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT
VDI 3766:2012-09 Ultrasound - Workplace - Measurement, assessment, judgement and reduction
VDI 2715:2011-11 Noise control in heating systems
VDI 2038 Blatt 3:2013-11 Serviceability of structures under dynamic loads - Methods of analysis and evaluation in structural dynamics - Secondary airborne sound - prognosis, measurement, evaluation and reduction measures
10/30214903 DC : 0 BS EN ISO 3095 - RAILWAY APPLICATIONS - ACOUSTICS - MEASUREMENT OF NOISE EMITTED BY RAILBOUND VEHICLES
I.S. EN 14035-28:2004 FIREWORKS - PART 28: ROMAN CANDLES - SPECIFICATION AND TEST METHODS
BS EN 60076-10:2016 Power transformers Determination of sound levels
PD EN 14035-17:2004 Fireworks Ground spinners. Specification and test methods
DIN EN 16286-2:2013-09 Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements
EN 16232:2013 Child use and care articles - Infant swings
PD EN 14035-4:2003 Fireworks Bangers and banger batteries. Specification and test methods
I.S. EN 13487:2004 HEAT EXCHANGERS - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT
I.S. EN 60601-1:2006&A1:2013&AC:2014&A12:2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
CEI EN 60076-10 : 2002 POWER TRANSFORMERS - PART 10: DETERMINATION OF SOUND LEVELS
UNI EN 16286-2 : 2013 RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 2: ACOUSTIC MEASUREMENTS
I.S. EN 60076-10:2016 POWER TRANSFORMERS - PART 10: DETERMINATION OF SOUND LEVELS
DIN EN 13544-1:2009-12 RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS
BS EN 14035-22:2004 Fireworks Mines. Specification and test methods
BS EN 14035-36:2004 Fireworks Wheels. Specification and test methods
UNE-EN 13141-2:2011 Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices
BS EN ISO 16032:2004 Acoustics. Measurement of sound pressure level from service equipment in buildings. Engineering method
CEI EN 60519-1 : 2016 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
UNE-EN 61010-1:2011 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements
EN 13487 : 2003 HEAT EXCHANGERS - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT
UNE-EN 15153-2:2014 Railway applications - External visible and audible warning devices for trains - Part 2: Warning horns
I.S. EN 13544-1:2007 RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS
EN 14035-20:2005 Fireworks - Part 20: Jumping crackers - Specification and test methods
UNI EN 13141-2 : 2010 VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES
UNI EN 13544-1 : 2009 RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS
UNI EN 13000 : 2014 CRANES - MOBILE CRANES
UNI EN 15892 : 2011 RAILWAY APPLICATIONS - NOISE EMISSION - MEASUREMENT OF NOISE INSIDE DRIVER'S CABS
PREN 13487 : DRAFT 2017 HEAT EXCHANGER - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT
17/30326391 DC : 0 BS EN 15153-2 - RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES - PART 2: WARNING HORNS FOR MAINLINE RAIL
I.S. EN 14035-38:2006 FIREWORKS - PART 38: SHOT TUBES - SPECIFICATION AND TEST METHODS
10/30205116 DC : 0 BS EN 15153-2 - RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES FOR TRAINS - PART 2: WARNING HORNS
PD EN 14035-20:2005 Fireworks Jumping crackers. Specification and test methods
PD EN 14035-9:2004 Fireworks Crackling granules. Specification and test methods
PD EN 14035-12:2003 Fireworks Flash bangers and flash banger batteries. Specification and test methods
PD EN 14035-10:2004 Fireworks Double bangers. Specification and test methods
I.S. EN 61010-2-040:2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-040: PARTICULAR REQUIREMENTS FOR STERILIZERS AND WASHER-DISINFECTORS USED TO TREAT MEDICAL MATERIALS
BS EN 62282-3-2:2006 Fuel cell technologies Stationary fuel cell power systems. Performance test methods
I.S. EN 14035-9:2004 FIREWORKS - PART 9: CRACKLING GRANULES - SPECIFICATION AND TEST METHODS
CEI EN 61672-3 : 2014 ELECTROACOUSTICS - SOUND LEVEL METERS - PART 3: PERIODIC TESTS
16/30342849 DC : 0 BS EN 12733 - AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
DIN EN 16232:2013-12 CHILD USE AND CARE ARTICLES - INFANT SWINGS
17/30361327 DC : 0 BS EN 13487 - HEAT EXCHANGER - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT
I.S. EN 61010-1:2010 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
I.S. EN 14035-17:2004 FIREWORKS - PART 17: GROUND SPINNERS - SPECIFICATION AND TEST METHODS
I.S. EN 14035-10:2004 FIREWORKS - PART 10: DOUBLE BANGERS - SPECIFICATION AND TEST METHODS
BS EN 60601-1 : 2006 MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
ISO 16032:2004 Acoustics — Measurement of sound pressure level from service equipment in buildings — Engineering method
BS EN 1547 : 2001 INDUSTRIAL THERMOPROCESSING EQUIPMENT - NOISE TEST CODE FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT
BS EN 13544-1 : 2007 RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS
BS EN 14035-38:2006 Fireworks Shot tubes. Specification and test methods
BS EN 13487:2003 Heat exchangers. Forced convection air cooled refrigerant condensers and dry coolers. Sound measurement
UNE-EN 13000:2010 Cranes - Mobile cranes
BS EN 14035-5:2006 Fireworks Batteries and combinations. Specification and test methods
EN 14035-3:2004 Fireworks - Part 3: Aerial wheels - Specification and test methods
EN 14035-22:2004 Fireworks - - Part 22: Mines - Specification and test methods
EN 1547:2001+A1:2009 Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
EN 14035-17:2004 Fireworks - Part 17: Ground spinners - Specification and test methods
EN 14035-10:2004 Fireworks - Part 10: Double Bangers - Specification and test methods
EN 15892:2011 Railway applications - Noise Emission - Measurement of noise inside driver's cabs
EN ISO 16032:2004 Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method (ISO 16032:2004)
EN 16286-2:2013 Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements
EN 14035-28 : 2004 COR 2006 FIREWORKS - PART 28: ROMAN CANDLES - SPECIFICATION AND TEST METHODS
EN 14035-36:2004 Fireworks - Part 36: Wheels - Specification and test methods
EN 14035-9:2004 Fireworks - Part 9: Crackling granules - Specification and test methods
EN 14035-38:2006 Fireworks - Part 38: Shot tubes - Specification and test methods
EN 14035-5:2006 Fireworks - Part 5: Batteries and combinations - Specification and test methods
UNE-EN 15892:2012 Railway applications - Noise Emission - Measurement of noise inside driver's cabs
BS EN 62585:2012 Electroacoustics. Methods to determine corrections to obtain the free-field response of a sound level meter
BS EN 16286-2:2013 Railway applications. Gangway systems between vehicles Acoustic measurements
CEI EN 62585 : 2013 ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER
11/30241418 DC : 0 BS EN 16286-2 - RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 2: ACOUSTIC MEASUREMENTS
DIN EN 14035-20:2005-06 FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS
BS EN 15892:2011 Railway applications. Noise emission. Measurement of noise inside driver\'s cabs
UNE-EN 62585:2013 Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter
DIN EN 14035-17:2004-11 FIREWORKS - PART 17: GROUND SPINNERS - SPECIFICATION AND TEST METHODS
UNE-EN 60076-10:2017 Power transformers - Part 10: Determination of sound levels
I.S. EN 16286-2:2013 RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 2: ACOUSTIC MEASUREMENTS
I.S. EN 61010-1:2010/A1:2019 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
EN 13000:2010+A1:2014 Cranes - Mobile cranes
I.S. EN 60519-1:2015 SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
UNI EN 15153-2 : 2013 RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES FOR TRAINS - PART 2: WARNING HORNS
DIN EN 15153-2:2013-04 RAILWAY APPLICATIONS - EXTERNAL VISIBLE AND AUDIBLE WARNING DEVICES FOR TRAINS - PART 2: WARNING HORNS
DIN EN 13487:2004-03 HEAT EXCHANGERS - FORCED CONVECTION AIR COOLED REFRIGERANT CONDENSERS AND DRY COOLERS - SOUND MEASUREMENT
BS EN 14035-28:2004 Fireworks Roman candles. Specification and test methods
EN 62282-3-2:2006 Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods
EN 60076-10:2016 Power transformers - Part 10: Determination of sound levels
EN 62389 : 2006 METHODS OF MEASUREMENT FOR DVD PLAYERS
DIN EN 15892:2011-05 Railway applications - Noise Emission - Measurement of noise inside driver\'s cabs
DIN EN ISO 16032:2004-12 Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method (ISO 16032:2004)
I.S. EN ISO 16032:2004 ACOUSTICS - MEASUREMENT OF SOUND PRESSURE LEVEL FROM SERVICE EQUIPMENT IN BUILDINGS - ENGINEERING METHOD
UNE-EN 13544-1:2007 Respiratory therapy equipment - Part 1: Nebulizing systems and their components

EN 61183:1994 Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters
IEC 61094-5:2016 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
EN 61094-5:2016 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
IEC 61183:1994 Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters
EN 55016-2-3:2017 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
CISPR 16-1-1:2015 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
IEC 60942:2003 Electroacoustics - Sound calibrators
ISO 26101:2017 Acoustics Test methods for the qualification of free-field environments
EN 61094-1:2000 Measurement microphones - Part 1: Specifications for laboratory standard microphones
IEC 61094-1:2000 Measurement microphones - Part 1: Specifications for laboratory standard microphones
CISPR 16-2-1:2014 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements
EN 62585 : 2012 ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER (IEC 62585:2012)
EN 61000-4-2:2009 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-6:2013 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
CISPR 22:2008 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
EN 61000-4-3 : 2006 AMD 2 2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
EN 61672-1:2013 Electroacoustics - Sound level meters - Part 1: Specifications
EN 55022:2010/AC:2011 INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008)
EN 61000-6-2:2005/corrigendum:2005 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
IEC 61094-8:2012 Measurement microphones - Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison
IEC 61000-4-20:2010 Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
CISPR 16-2-3:2016 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
EN 61000-4-6:2014/AC:2015 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013)
EN 60942:2003 Electroacoustics - Sound calibrators
IEC 62585:2012 Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter
EN 61000-4-20:2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES
EN 55016-2-1:2014/A1:2017 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-1: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - CONDUCTED DISTURBANCE MEASUREMENTS (CISPR 16-2-1:2014/A1:2017)
ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
EN 55016-1-1:2010/A2:2014 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - MEASURING APPARATUS (CISPR 16-1-1:2010/A2:2014)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.