EN 61191-4:2017
Current
Current
The latest, up-to-date edition.
Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies
Published date
27-10-2017
Sorry this product is not available in your region.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 General terminal and part mounting requirements
6 Acceptance requirements
7 Rework of unsatisfactory soldered connections
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
IEC61191-4:2017(E) prescribes requirements for terminal soldered assemblies. The requirements pertain to those assemblies that are entirely terminal/wire interconnecting structures or to the terminal/wire portions of those assemblies that include other related technologies (i.e. surface mounting, through-hole mounting, chip mounting).This edition includes the following significant technical changes with respect to the previous edition:The requirements have been updated to be compliant with the acceptance criteria in IPC‑A-610F.
| Committee |
CLC/SR 91
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 61191-4:2016-01 (Draft) | Identical |
| BS EN 61191-4:1999 | Identical |
| NEN EN IEC 61191-4 : 2017 | Identical |
| I.S. EN 61191-4:2017 | Identical |
| UNE-EN 61191-4:2017 | Identical |
| PN EN 61191-4 : 2017 | Identical |
| SS-EN 61191-4:2018 | Identical |
| NBN EN 61191-4 : 1999 | Identical |
| CEI EN 61191-4 : 2018 | Identical |
| SN EN 61191-4 : 1998 | Identical |
| IEC 61191-4:2017 | Identical |
| I.S. EN 61191-4:1999 | Identical |
| BS EN 61191-4:2017 | Identical |
| DIN EN 61191-4:2018-05 | Identical |
| CEI EN 61191-4 : 2005 | Identical |
| SN EN 61191-4:2017 | Identical |
| NF EN 61191-4 : 1999 | Identical |
| PNE-prEN 61191-4:2016 | Identical |
| BS EN 61192-1:2003 | Workmanship requirements for soldered electronic assemblies General |
| I.S. EN 61193-1:2002 | QUALITY ASSESSMENT SYSTEMS - PART 1: REGISTRATION AND ANALYSIS OF DEFECTS ON PRINTED BOARD ASSEMBLIES |
| I.S. EN 61192-1:2003 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - GENERAL |
| BS EN 61191-1:2013 | Printed board assemblies Generic specification. Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies |
| EN 61192-3:2003 | Workmanship requirements for soldered electronic assemblies - Part 3: Through-hole mount assemblies |
| I.S. EN 61191-1:2013 | PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES (IEC 61191-1:2013 (EQV)) |
| I.S. EN 61192-3:2003 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - PART 3: THROUGH-HOLE MOUNT ASSEMBLIES |
| I.S. EN 61192-5:2007 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - PART 5: REWORK, MODIFICATION AND REPAIR OF SOLDERED ELECTRONIC ASSEMBLIES |
| BS EN 61192-4:2003 | Workmanship requirements for soldered electronic assemblies Terminal assemblies |
| OVE/ONORM EN 60068-2-20 : 2009 | ENVIRONMENTAL TESTING - PART 2-20: TESTS - TEST T: TEST METHODS FOR SOLDERABILITY AND RESISTANCE TO SOLDERING HEAT OF DEVICES WITH LEADS |
| EN 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| BS EN 61192-3:2003 | Workmanship requirements for soldered electronic assemblies Through-hole mount assemblies |
| BS EN 60068-2-20:2008 | Environmental testing Tests. Test T. Test methods for solderability and resistance to soldering heat of devices with leads |
| I.S. EN 61192-2:2003 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - SURFACE-MOUNT ASSEMBLIES |
| I.S. EN 60068-2-20:2008 | ENVIRONMENTAL TESTING - PART 2-20: TESTS - TEST T: TEST METHODS FOR SOLDERABILITY AND RESISTANCE TO SOLDERING HEAT OF DEVICES WITH LEADS |
| I.S. EN 61192-4:2003 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - TERMINAL ASSEMBLIES |
| BS EN 61193-1:2002 | Quality assessment systems Registration and analysis of defects on printed board assemblies |
| BS EN 61192-5:2007 | Workmanship requirements for soldered electric assemblies Rework, modification and repair of soldered electronic assemblies |
| BS EN 61192-2:2003 | Workmanship requirements for soldered electronic assemblies Surface-mount assemblies |
| CEI EN 60068-2-20 : 2009 | ENVIRONMENTAL TESTING - PART 2-20: TESTS - TEST T: TEST METHODS FOR SOLDERABILITY AND RESISTANCE TO SOLDERING HEAT OF DEVICES WITH LEADS |
| EN 61193-1:2002 | Quality assessment systems - Part 1: Registration and analysis of defects on printed board assemblies |
| EN 61192-5 : 2007 | WORKMANSHIP REQUIREMENTS FOR SOLDERED ELECTRONIC ASSEMBLIES - PART 5: REWORK, MODIFICATION AND REPAIR OF SOLDERED ELECTRONIC ASSEMBLIES |
| EN 61191-1:2013 | PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES (IEC 61191-1:2013) |
| EN 61192-2:2003 | Workmanship requirements for soldered electronic assemblies - Part 2: Surface-mount assemblies |
| EN 61192-1:2003 | Workmanship requirements for soldered electronic assemblies - Part 1: General |
| EN 61192-4:2003 | Workmanship requirements for soldered electronic assemblies - Part 4: Terminal assemblies |
| IEC 61193-3:2013 | Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
| IEC 61193-1:2001 | Quality assessment systems - Part 1: Registration and analysis of defects on printed board assemblies |
| IEC 61188-5-3:2007 | Printed boards and printed board assemblies - Design and use - Part 5-3: Attachment (land/joint) considerations - Components with gull-wing leads on two sides |
| IEC 61188-5-2:2003 | Printed boards and printed board assemblies - Design and use - Part 5-2: Attachment (land/joint) considerations - Discrete components |
| IEC 60068-2-58:2015+AMD1:2017 CSV | Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
| IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| IPC J STD 001 : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IEC 61190-1-2:2014 | Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly |
| IEC 62326-1:2002 | Printed boards - Part 1: Generic specification |
| IPC J STD 006 : C | REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| IPC J STD 004 : B | REQUIREMENTS FOR SOLDERING FLUXES |
| IPC TM 650 : 0 | TEST METHODS MANUAL |
| IEC 62326-4:1996 | Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specification |
| IPC A 610 : F | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC J STD 005 : A | REQUIREMENTS FOR SOLDERING PASTES |
| IPC J STD 002 : D | SOLDERABILITY TESTS FOR COMPONENT LEADS, TERMINATIONS, LUGS, TERMINALS AND WIRES |
| IEC 61188-7:2017 | Printed boards and printed board assemblies - Design and use - Part 7: Electronic component zero orientation for CAD library construction |
| IEC 61191-1:2013 | Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies |
| IEC 61188-5-6:2003 | Printed boards and printed board assemblies - Design and use - Part 5-6: Attachment (land/joint) considerations - Chip carriers with J-leads on four sides |
| IEC 61188-5-1:2002 | Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint) considerations - Generic requirements |
| IEC 60194:2015 | Printed board design, manufacture and assembly - Terms and definitions |
| IEC 61188-5-5:2007 | Printed boards and printed board assemblies - Design and use - Part 5-5: Attachment (land/joint) considerations - Components with gull-wing leads on four sides |
| ISO 9001:2015 | Quality management systems — Requirements |
| IEC 62326-4-1:1996 | Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specification - Section 1: Capability detail specification - Performance levels A, B and C |
| IPC OI 645 : 0 | STANDARD FOR VISUAL OPTICAL INSPECTION AIDS |
| EN 61191-1:2013 | PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES (IEC 61191-1:2013) |
| IEC 61188-5-4:2007 | Printed boards and printed board assemblies - Design and use - Part 5-4: Attachment (land/joint) considerations - Components with J leads on two sides |
| IPC J STD 003 : C | SOLDERABILITY TESTS FOR PRINTED BOARDS |
| IPC SM 817 : A | GENERAL REQUIREMENTS FOR DIELECTRIC SURFACE MOUNTING ADHESIVES |
| IEC 61189-2:2006 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures |
| IPC 9191 : 0 | GENERAL GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.