EN 61076-7:2000
Current
The latest, up-to-date edition.
Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification
23-11-2000
Clause
1 General
1.1 Scope
1.2 Normative references
2 Technical
2.1 Terminology
2.2 Classification into climatic categories
2.3 Material
2.4 Finish
2.5 Styles
2.6 IEC type designation
2.7 Marking
2.8 Installation instructions and tools
2.9 Delivery conditions
3 Quality assessment procedures
3.1 Primary stage of manufacture
3.2 Structurally similar components
3.3 System of levels
3.4 Grouping of tests
3.5 Approval of manufactureres, independent test
laboratories and distributors
3.6 Qualification approval
3.7 Test records
3.8 Quality conformance inspection
4 General requirements and test schedules
4.1 General
4.2 Test procedures and measuring methods
4.3 Preconditioning
4.4 Preparation of specimens
4.5 Test schedule
5 Capability approval procedure
5.1 General
5.2 Manufacturing approval
5.3 Capability manual
5.4 Specifications
5.5 Maintenance of capability
5.6 Changes to the capability approval
5.7 Test schedule
Annex A (normative) Proposal for mechanical endurance
test method
Annex B (normative) Proposal for lock-wire hole
strength test method
Annex C (normative) Proposal for housing (shell)
continuity test method
Annex D (normative) Proposal for mating and unmating
test method
Annex E (normative) Proposal for accessory thread
strength test method
Annex ZA (normative) Normative references to
international publications with their
corresponding European publications
Bibliography
Establishes uniform specifications, type test requirements and quality assessment procedures for cable outlet accessories as well as rules for the preparation of detail specifications for cable outlet accessories of assessed quality for connectors for frequencies below 3 MHz.
| Committee |
CLC/SR 48B
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 61076-7 : 2001 | Identical |
| IEC 61076-7:2000 | Identical |
| NBN EN 61076-7 : 2001 | Identical |
| NEN EN IEC 61076-7 : 2001 | Identical |
| PN EN 61076-7 : 2002 | Identical |
| SN EN 61076-7 : 2000 | Identical |
| BS EN 61076-7:2001 | Identical |
| UNE-EN 61076-7:2001 | Identical |
| CEI EN 61076-7 : 2001 | Identical |
| DIN EN 61076-7:2001-06 | Identical |
| I.S. EN 61076-7-100:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM |
| CEI EN 61076-7-100 : 2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM |
| EN 61076-7-100 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM |
| EN 61076-7-001:2004 | Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification |
| BS EN 61076-7-100:2006 | Connectors for electronic equipment. Product requirements Cable outlet accessories. Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system |
| BS EN 61076-7-001:2004 | Connectors for electronic equipment Cable outlet accessories - Blank detail specification |
| I.S. EN 61076-7-001:2004 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-001: CABLE OUTLET ACCESSORIES - BLANK DETAIL SPECIFICATION |
| IEC 60068-4:1987 | Environmental testing. Part 4: Information for specification writers - Test summaries |
| CECC 00109 : 1974 | CECC RULES OF PROCEDURE: RP 9: CERTIFIED TESTS RECORDS |
| IEC 60512-8:1993 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60512-6:1984 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 6: Climatic tests and soldering tests |
| IECQ 001002-3:2005 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 3: APPROVAL PROCEDURES |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| IEC 60512-7:1993 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests |
| IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
| IEC 60512-4:1976 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 4: Dynamic stress tests |
| IEC 60512-9:1992 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 9: Miscellaneous tests |
| ISO 129:1985 | Technical drawings Dimensioning General principles, definitions, methods of execution and special indications |
| IEC 60512-5:1992 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests |
| IEC 60512-1:2001 | Connectors for electronic equipment - Tests and measurements - Part 1: General |
| IEC 60050-581:2008 | International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment |
| IEC 60512-3:1976 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 3: Current-carrying capacity tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.