EN 60966-2-6:2017
Current
Current
The latest, up-to-date edition.
Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors
Published date
17-02-2017
Sorry this product is not available in your region.
FOREWORD
INTRODUCTION
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
IEC 60966-2-6:2016 is a detail specification which applies to coaxial cables described in the IEC 61196 series. It relates to cable assemblies for radio and TV receivers, and in particular to the cable assemblies subfamily F (see IEC 61169-24). These cable assemblies are used as described in IEC 60728-4. This part of IEC 60966 gives subfamily requirements and severities which shall be applied. This edition includes the following significant technical changes with respect to the previous edition:
a) the return loss requirements and the insertion loss requirements are matched to the relevant cables,
b) screening effectiveness shall be measured according to IEC 62153-4-7, triaxial method,
c) screening class A+ was introduced.
This publication is to be read in conjunction with IEC 60966-1:1999, IEC 60966-2-1:2008 and IEC 60966-2-2:2003
| Committee |
CLC/TC 46X
|
| DevelopmentNote |
To be read in conjunction with EN 60966-1, EN 60966-2-1 and EN 60966-2-2 (05/2001)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| PN EN 60966-2-6 : 2017 | Identical |
| BS EN 60966-2-6:2017 | Identical |
| DIN EN 60966-2-6 : 2017 | Identical |
| VDE 0887-966-2-6 : 2017 | Identical |
| I.S. EN 60966-2-6:2017 | Identical |
| CEI EN 60966-2-6 : 2010 | Identical |
| IEC 60966-2-6:2016 | Identical |
| SN EN 60966-2-6 : 2017 | Identical |
| NF EN 60966-2-6 : 2017 | Identical |
| NEN EN IEC 60966-2-6 : 2017 | Identical |
| UNE-EN 60966-2-6:2017 | Identical |
| UNE-EN 60966-2-6:2009 | Identical |
| NBN EN 60966 2-6 : 2009 | Identical |
| PNE-FprEN 60966-2-6 | Identical |
| BS EN 60728-1-2:2014 | Cable networks for television signals, sound signals and interactive services Performance requirements for signals delivered at the system outlet in operation |
| UNE-EN 50083-2:2013 | Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
| EN 50083-8:2013 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 8: ELECTROMAGNETIC COMPATIBILITY FOR NETWORKS |
| EN 60728-4:2008 | Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks |
| EN 60728-1-2:2014 | Cable networks for television signals, sound signals and interactive services - Part 1-2: Performance requirements for signals delivered at the system outlet in operation |
| EN 60728-1-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1-1: RF cabling for two way home networks |
| EN 60728-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths |
| EN 50083-2:2012/A1:2015 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| BS EN 60728-1:2014 | Cable networks for television signals, sound signals and interactive services System performance of forward paths |
| I.S. EN 50173-1:2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60728-1-2:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 1-2: PERFORMANCE REQUIREMENTS FOR SIGNALS DELIVERED AT THE SYSTEM OUTLET IN OPERATION |
| CEI EN 50083-2 : 2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| BS EN 60728-1-1:2014 | Cable networks for television signals, sound signals and interactive services RF cabling for two way home networks |
| BS EN 50173-1:2011 | Information technology. Generic cabling systems General requirements |
| EN 50173-1:2011 | Information technology - Generic cabling systems - Part 1: General requirements |
| I.S. EN 50529-2:2010 | EMC NETWORK STANDARD - PART 2: WIRE-LINE TELECOMMUNICATIONS NETWORKS USING COAXIAL CABLES |
| BS EN 50529-2:2010 | EMC network standard Wire-line telecommunications networks using coaxial cables |
| CEI EN 60728-4 : 2008 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS |
| BS EN 50083-2 : 2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| BS EN 60728-4:2008 | Cable networks for television signals, sound signals and interactive services Passive wideband equipment for coaxial cable networks |
| CEI EN 50173-1 : 2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| CEI EN 50083-8 : 2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 8: ELECTROMAGNETIC COMPATIBILITY FOR NETWORKS |
| I.S. EN 60728-4:2008 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 4: PASSIVE WIDEBAND EQUIPMENT FOR COAXIAL CABLE NETWORKS |
| I.S. EN 60728-1-1:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 1-1: RF CABLING FOR TWO WAY HOME NETWORKS |
| I.S. EN 50083-2:2012 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2: ELECTROMAGNETIC COMPATIBILITY FOR EQUIPMENT |
| CEI EN 50529-2 : 2013 | EMC NETWORK STANDARD - PART 2: WIRE-LINE TELECOMMUNICATIONS NETWORKS USING COAXIAL CABLES |
| BS EN 60728-101:2017 | Cable networks for television signals, sound signals and interactive services System performance of forward paths loaded with digital channels only |
| BS EN 50083-8:2013 | Cable networks for television signals, sound signals and interactive services Electromagnetic compatibility for networks |
| TR 102 994 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); IN HOME CABLING FOR INTEGRATED BROADBAND CABLE AND TELEVISION SERVICES |
| I.S. EN 50083-8:2013 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 8: ELECTROMAGNETIC COMPATIBILITY FOR NETWORKS |
| I.S. EN 60728-1:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 1: SYSTEM PERFORMANCE OF FORWARD PATHS |
| EN 50529-2:2010 | EMC Network Standard - Part 2: Wire-line telecommunications networks using coaxial cables |
| EN 60966-2-2:2003 | Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies |
| EN 60728-4:2008 | Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks |
| IEC 62153-4-7:2015 | Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance Z<sub>T</sub> and screening attenuation a<sub>S</sub> or coupling attenuation a<sub>C</sub> of connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method |
| IEC 60966-2-2:2003 | Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies |
| IEC 61196-1-110:2016 | Coaxial communication cables - Part 1-110: Electrical test methods - Test for continuity |
| IEC 60966-1:1999 | Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods |
| IEC 61196-6:2009 | Coaxial communication cables - Part 6: Sectional specification for CATV drop cables |
| IEC 61169-24:2009 | Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F) |
| EN 60966-1:1999 | Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods |
| EN 60966-2-1:2009 | Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies |
| IEC 60728-4:2007 | Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks |
| EN 62153-4-7:2016/AC:2016-05 | METALLIC COMMUNICATION CABLE TEST METHODS - PART 4-7: ELECTROMAGNETIC COMPATIBILITY (EMC) - TEST METHOD FOR MEASURING OF TRANSFER IMPEDANCE Z[T] AND SCREENING ATTENUATION A[S] OR COUPLING ATTENUATION A[C] OF CONNECTORS AND ASSEMBLIES UP TO AND ABOVE 3 GHZ - TRIAXIAL TUBE IN TUBE METHOD (IEC 62153-4-7:2015/COR1:2016) |
| IEC 60966-2-1:2008 | Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies |
| EN 61169-24:2009 | Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.