EN 60923:2005/A1:2006
Current
The latest, up-to-date edition.
AUXILIARIES FOR LAMPS - BALLASTS FOR DISCHARGE LAMPS (EXCLUDING TUBULAR FLUORESCENT LAMPS) - PERFORMANCE REQUIREMENTS
11-08-2006
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General notes on tests
5 Marking
6 Ballasts designed to operate at various
supply voltages
7 Circuit power-factor
8 Supply current
9 Current waveform
9.1 Lamp operating current waveform
9.2 Test procedure
10 Magnetic screening
11 Ignitors
12 Electrical requirements for ballasts for
high-pressure mercury vapour lamps
12.1 Ballast setting
12.2 Short-circuit current
12.3 Open-circuit voltage (minimum voltage for
stable operation)
13 Electrical requirements for ballasts for low-pressure
sodium vapour lamps
13.1 Ballast setting
13.2 Short-circuit current and run-up conditions
13.3 Open-circuit voltage (minimum voltage for
stable operation)
14 Electrical requirements for ballasts for metal
halide lamps
14.1 Ballast setting
14.2 Short-circuit current and run-up conditions
14.3 Open-circuit voltage (minimum voltage for
stable operation)
15 Electrical requirements for ballasts for high-pressure
sodium vapour lamps
15.1 Ballast setting
15.2 Short-circuit current
15.3 Open-circuit voltage
Annex A (normative) Reference ballasts
Annex B (normative) Reference lamps
Annex C (normative) General requirements for tests
Annex D (normative) Explanation of measurements of
ballast setting and lamp-operating
current waveform for high-pressure sodium
vapour lamps
Annex E (informative) Interpretations
Annex ZA (normative) Normative references to international
publications with their corresponding
European publications
Bibliography
Describes performance requirements for ballasts for discharge lamps such as high-pressure mercury vapour, low-pressure sodium vapour, high-pressure sodium vapour and metal halide lamps. Clauses 12 through 15 each detail specific requirements for a particular type of ballast.
Committee |
TC 34
|
DevelopmentNote |
Supersedes HD 302. (07/2004) To be read in conjunction with EN 61347-2-9 and EN 61347-1. (11/2005)
|
DocumentType |
Standard
|
PublisherName |
European Committee for Standards - Electrical
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNE-EN 60923:2006 | Identical |
CEI EN 60923/A1:2007 | Identical |
PN EN 60923 : 2006 AMD 1 2006 | Identical |
I.S. EN 60923:2005 | Identical |
NEN 10923 : 1996 | Identical |
IEC 60923:2005/AMD1:2006 | Identical |
SN EN 60923 : 2005 | Identical |
IEC 60923:2005+AMD1:2006 CSV | Identical |
NF EN 60923 : 2006 AMD 1 2006 | Identical |
NBN EN 60923 : 2006 AMD 1 2006 | Identical |
NEN EN IEC 60923 : 2005 AMD 1 2006 | Identical |
DIN EN 60923 : 2007 | Identical |
BS EN 60923:2005 | Identical |
VDE 0712-13 : 2007 | Identical |
PREN 12665 : DRAFT 2009 | LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
BS EN 60922:1997 | Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). General and safety requirements |
DIN EN 60922 : 1997 | AUXILIARIES FOR LAMPS - BALLASTS FOR DISCHARGE LAMPS (EXCLUDING TUBULAR FLUORESCENT LAMPS) - GENERAL AND SAFETY REQUIREMENTS |
BS EN 62386-205:2009 | Digital addressable lighting interface Particular requirements for control gear. Supply voltage controller for incandescent lamps (device type 4) |
CEI EN 60188 : 2002 | HIGH PRESSURE MERCURY VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS |
I.S. EN 61347-1:2015 | LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
DIN EN 12665:2016-09 (Draft) | LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
BS EN 61347-1:2015 | Lamp controlgear General and safety requirements |
EN 61347-1:2015 | Lamp controlgear - Part 1: General and safety requirements |
EN 62035:2014 | Discharge lamps (excluding fluorescent lamps) - Safety specifications |
EN 62386-207:2009 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 207: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - LED MODULES (DEVICE TYPE 6) |
EN 62386-103:2014 | Digital addressable lighting interface - Part 103: General requirements - Control devices |
EN 60662:2012 | High-pressure sodium vapour lamps - Performance specifications |
EN 60927:2007/A1:2013 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - PERFORMANCE REQUIREMENTS (IEC 60927:2007/A1:2013 (34C/951/CDV)) |
EN 62386-204 : 2009 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 204: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - LOW VOLTAGE HALOGEN LAMPS (DEVICE TYPE 3) |
EN 62386-209 : 2011 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 209: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - COLOUR CONTROL (DEVICE TYPE 8) |
EN 62386-205:2009 | Digital addressable lighting interface - Part 205: Particular requirements for control gear - Supply voltage controller for incandescent lamps (device type 4) |
BS EN 60188:2001 | High-pressure mercury vapour lamps. Performance specifications |
BS EN 62386-210:2011 | Digital addressable lighting interface Particular requirements for control gear. Sequencer (device type 9) |
BS EN 62386-202:2009 | Digital addressable lighting interface Particular requirements for control gear. Self-contained emergency lighting (device type 1) |
BS EN 62386-207:2009 | Digital addressable lighting interface Particular requirements for control gear. LED modules (device type 6) |
09/30185891 DC : 0 | BS EN 12665 - LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
BS EN 60662:2012+A11:2019 | High-pressure sodium vapour lamps. Performance specifications |
BS EN 61167:2011 | Metal halide lamps. Performance specification |
BS EN 60927 : 2007 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - PERFORMANCE REQUIREMENTS |
EN 62386-102:2014 | Digital addressable lighting interface - Part 102: General requirements - Control gear |
15/30333423 DC : 0 | BS EN 61167:2014/PRAA:2015 - METAL HALIDE LAMPS - PERFORMANCE SPECIFICATION |
I.S. EN 61167:2016 | METAL HALIDE LAMPS - PERFORMANCE SPECIFICATION |
BS EN 62386-203:2009 | Digital addressable lighting interface Particular requirements for control gear. Discharge lamps (excluding fluorescent lamps) (device type 2) |
BS EN 62386-103:2014+A1:2018 | Digital addressable lighting interface General requirements. Control devices |
BS EN 60192:2001 | Low pressure sodium vapour lamps. Performance specification |
UNI EN 12665 : 2011 | LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
UNE-EN 61347-1:2016 | Lamp controlgear - Part 1: General and safety requirements |
EN 61167:2016 | Metal halide lamps - Performance specification |
BS EN 62386-208:2009 | Digital addressable lighting interface Particular requirements for control gear. Switching function (device type 7) |
CEI EN 60192 : 2002 | LOW PRESSURE SODIUM VAPOUR LAMPS PERFORMANCE REQUIREMENTS |
BS EN 62386-209:2011 | Digital addressable lighting interface Particular requirements for control gear. Colour control (device type 8) |
CEI EN 61347-1 : 2016 | LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
UNE-EN 12665:2012 | Light and lighting - Basic terms and criteria for specifying lighting requirements |
BS EN 12665:2011 | Light and lighting. Basic terms and criteria for specifying lighting requirements |
I.S. EN 62386-210:2011 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 210: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - SEQUENCER (DEVICE TYPE 9) (IEC 62386-210:2011 (EQV)) |
BS EN 62386-206:2009 | Digital addressable lighting interface Particular requirements for control gear. Conversion from digital signal into d.c. voltage (device type 5) |
BS EN 62386-204:2009 | Digital addressable lighting interface Particular requirements for control gear. Low voltage halogen lamps (device type 3) |
CEI EN 60662 : 2013 | HIGH-PRESSURE SODIUM VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS |
I.S. EN 60927:2008 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - PERFORMANCE REQUIREMENTS |
I.S. EN 60662:2012 | HIGH-PRESSURE SODIUM VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS (IEC 60662:2011 (MOD)) |
UNE-EN 62035:2015 | Discharge lamps (excluding fluorescent lamps) - Safety specifications |
I.S. EN 62035:2014 | DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) - SAFETY SPECIFICATIONS |
EN 60598-1:2015/A1:2018 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
BS EN 62035:2014 | Discharge lamps (excluding fluorescent lamps). Safety specifications |
I.S. EN 12665:2011 | LIGHT AND LIGHTING - BASIC TERMS AND CRITERIA FOR SPECIFYING LIGHTING REQUIREMENTS |
EN 62386-210:2011 | Digital addressable lighting interface - Part 210: Particular requirements for control gear - Sequencer (device type 9) |
EN 62386-208:2009 | Digital addressable lighting Interface - Part 208: Particular requirements for control gear - Switching function (device type 7) |
EN 62386-202 : 2009 | DIGITAL ADDRESSABLE LIGHTING INTERFACE - PART 202: PARTICULAR REQUIREMENTS FOR CONTROL GEAR - SELF-CONTAINED EMERGENCY LIGHTING (DEVICE TYPE 1) |
EN 62386-203:2009 | Digital addressable lighting interface - Part 203: Particular requirements for control gear - Discharge lamps (excluding fluorescent lamps) (device type 2) |
EN 62386-206:2009 | Digital addressable lighting interface - Part 206: Particular requirements for control gear - Conversion from digital signal into d. c. voltage (device type 5) |
EN 60188:2001 | High-pressure mercury vapour lamps - Performance specifications |
EN 60192:2001 | Low pressure sodium vapour lamps - Performance specifications |
IEC 61547:2009 | Equipment for general lighting purposes - EMC immunity requirements |
IEC 60662:2011 | High-pressure sodium vapour lamps - Performance specifications |
EN 61347-2-9:2013 | Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
IEC 60192:2001 | Low-pressure sodium vapour lamps - Performance specifications |
IEC 60188:2001 | High-pressure mercury vapour lamps - Performance specifications |
IEC 61347-2-9:2012 | Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
IEC 61347-1:2015 RLV | Lamp controlgear - Part 1: General and safety requirements |
EN 61347-2-1:2001/A2:2014 | LAMP CONTROLGEAR - PART 2-1: PARTICULAR REQUIREMENTS FOR STARTING DEVICES (OTHER THAN GLOW STARTERS) (IEC 61347-2-1:2000/A2:2013) |
IEC 61347-2-1:2000+AMD1:2005+AMD2:2013 CSV | Lamp controlgear - Part 2-1: Particular requirements for startingdevices (other than glow starters) |
IEC 61167:2015 | Metal halide lamps - Performance specification |
IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
IEC 60921:2004+AMD1:2006 CSV | Ballasts for tubular fluorescent lamps - Performance requirements |
EN 61347-1:2015 | Lamp controlgear - Part 1: General and safety requirements |
EN 60662:2012 | High-pressure sodium vapour lamps - Performance specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.