EN 60811-4-2:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation
01-06-2012
EN 60811-410:2012/A1:2017
EN 60811-510:2012
EN 60811-407:2012
EN 60811-100:2012
EN 60811-408:2012
EN 60811-512:2012
EN 60811-513:2012
11-08-2004
1 General
1.1 Scope
1.2 Normative references
2 Terms and definitions
3 Test values
4 Applicability
5 Type tests and other tests
6 Pre-conditioning
7 Median value
8 Tensile strength and elongation at break after
conditioning at elevated temperature
8.1 General
8.2 Conditioning procedure
8.3 Tensile strength and elongation tests after
conditioning at elevated temperature
8.4 Expression of results
9 Wrapping test after conditioning at elevated
temperature
9.1 General
9.2 Conditioning procedure
9.3 Test procedure
9.4 Evaluation of results
10 Wrapping test after thermal ageing in air
10.1 General
10.2 Apparatus
10.3 Sampling
10.4 Ageing procedure
10.5 Test procedure
10.6 Evaluation of results
11 Mass increase of insulation
11.1 General
11.2 Sampling
11.3 Test procedure
11.4 Calculation
Annex A (normative) Long-term stability test
Annex B (normative) Test method for copper-catalyzed
oxidative degradation of polyolefin
insulated conductors (Oxidation Induction
Time (OIT) test)
Annex ZA (normative) Normative references to international
publications with their corresponding
European publications
Bibliography
Specifies the test methods for testing polymeric insulating and sheathing materials of electric and optical fibre cables for power distribution and communications, including cables used on ships and in offshore applications. These test methods apply specifically to polyolefin insulation and sheath. The principal changes with respect to the previous edition are listed below: a) A measurement of tensile strength is included in Clause 8. b) Clause 10 is now the only method in EN 60811 for wrapping test after thermal ageing in air. c) Two ageing conditions are now specified for the long-term stability test in Annex A.
| Committee |
CLC/TC 20
|
| DevelopmentNote |
Supersedes HD 505.4.2. (03/2000)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| IEC 60811-4-2:2004 | Identical |
| NF EN 60811-4-2 : 2004 | Identical |
| UNE-EN 60811-4-2:2005 | Identical |
| NBN EN 60811 4-2 : 2006 | Identical |
| NEN EN IEC 60811-4-2 : 2004 | Identical |
| I.S. EN 60811-4-2:2004 | Identical |
| PN EN 60811-4-2 : 2006 | Identical |
| SN EN 60811-4-2 : 1999 | Identical |
| VDE 0473-811-4-2 : 2005 | Identical |
| BS EN 60811-4-2:2004 | Identical |
| CEI EN 60811-4-2 : 2005 | Identical |
| DIN EN 60811-4-2 : 2005 | Identical |
| HD 21.1 : 200S4 | CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING THERMOPLASTIC INSULATION - GENERAL REQUIREMENTS |
| BS EN 187104:2001 | Harmonized system of quality assessment for electronic components. Family specification. Single-mode optical fibre cables to beused as underwater cables for lakes and river crossings, etc |
| EN 60794-4:2003 | Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines |
| HD 22-1 : 200S4 | CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING THERMOSETTING INSULATION - GENERAL REQUIREMENTS |
| EN 187104:2001 | Family specification - Single-mode optical fibre cables to be used as underwater cables for lakes and river crossings etc. |
| EN 50290-2-24 : 2002 AMD 1 2008 | COMMUNICATION CABLES - PART 2-24: COMMON DESIGN RULES AND CONSTRUCTION - PE SHEATHING |
| I.S. EN 60708:2005 | LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
| CEI EN 60708 : 2006 | LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
| I.S. HD 22-1:2002 | CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 1: GENERAL REQUIREMENTS |
| BS EN 50290-2-24 : 2002 | COMMUNICATION CABLES - PART 2-24: COMMON DESIGN RULES AND CONSTRUCTION - PE SHEATHING |
| BS EN 60708:2005 | Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath |
| I.S. EN 60794-4:2003 | OPTICAL FIBRE CABLES - PART 4: SECTIONAL SPECIFICATION - AERIAL OPTICAL CABLES ALONG ELECTRICAL POWER LINES |
| I.S. HD 21-1:2002 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 50290-2-24:2002 | COMMUNICATION CABLES - PART 2-24: COMMON DESIGN RULES AND CONSTRUCTION - PE SHEATHING |
| BS EN 60794-4:2003 | Optical fibre cables Sectional specification. Aerial optical cables along electrical power lines |
| EN 60708:2005/AC:2016-08 | LOW-FREQUENCY CABLES WITH POLYOLEFIN INSULATION AND MOISTURE BARRIER POLYOLEFIN SHEATH |
| EN 60811-1-3:1995/A1:2001 | INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 1-3: GENERAL APPLICATION - METHODS FOR DETERMINING THE DENSITY - WATER ABSORPTION TESTS - SHRINKAGE TEST |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| IEC 60811-1-1:1993+AMD1:2001 CSV | Common test methods for insulating and sheathing materials of electric cables and optical cables - Part 1-1: Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties |
| IEC 60811-5-1:1990+AMD1:2003 CSV | Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop-point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C |
| IEC 60811-1-3:1993+AMD1:2001 CSV | Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-3: General application -Methods for determining the density - Water absorption tests - Shrinkage test |
| EN 60811-1-1:1995/A1:2001 | INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - GENERAL APPLICATION - MEASUREMENT OF THICKNESS AND OVERALL DIMENSIONS - TESTS FOR DETERMINING MECHANICAL PROPERTIES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.