EN 60794-2-30:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables
30-05-2019
03-12-2008
FOREWORD
1 Scope
2 Normative references
3 Construction
3.1 General
3.2 Optical fibres and primary coating
3.3 Buffer
3.4 Ruggedized fibre
3.5 Slotted core
3.6 Tube
3.7 Stranded loose tube
3.8 Ribbon structure
3.9 Strength and anti-buckling members
3.10 Ripcord
3.11 Sheath
3.12 Sheath marking
3.13 Identification
3.14 Example of cable construction
4 Dimensions
4.1 Optical fibres and primary coating
4.2 Ribbon structural geometry
4.3 Optical fibre ribbon cable
5 Tests
5.1 Dimensions
5.2 Mechanical requirements
5.2.1 Tensile performance
5.2.2 Crush
5.2.3 Impact
5.2.4 Bend
5.2.5 Repeated bending
5.2.6 Bending under tension
5.2.7 Bending at low temperature
5.2.8 Flexing
5.2.9 Torsion
5.2.10 Kink
5.3 Environmental requirements
5.3.1 Temperature cycling
5.4 Transmission requirements
5.4.1 Single-mode optical fibres
5.4.2 Single-mode dispersion unshifted (B1.1)
optical fibre
5.4.3 Single mode dispersion unshifted (B1.2)
optical fibre
5.4.4 Single mode dispersion unshifted (B1.3)
optical fibre
5.4.5 Single mode dispersion shifted (B2) optical fibre
5.4.6 Single mode non-zero dispersion (B4) optical fibre
5.4.7 Single mode wide band non-zero dispersion
(B5) optical fibre
5.4.8 Multimode fibres
5.5 Fire Performance
Annex A (informative) - Example of cable construction
Annex B (informative) - Family Specification Indoor cables -
optical fibre ribbon cables
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding
European publications
IEC 60794-2-30:2008(E) is part of the IEC 60794 family specification which covers optical fibre ribbon cables for indoor use. The requirements of the sectional specification IEC 60794-2 are applicable to cables covered by this standard. This second edition cancels and replaces the first edition published in 2003. It constitutes a technical revision. The main changes are: - subclause 5.4 has been detailed according to the fibre type; - Annex A has been added to show an example of cable construction; - Annex B has been added which is a blank detail specification including Mice classification and requirements.
| Committee |
CLC/TC 86A
|
| DevelopmentNote |
To be read in conjunction with EN 60794-1-1, EN 60794-1-2 and EN 60794-2 (05/2003)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| IEC 60794-2-30:2008 | Identical |
| NF EN 60794-2-30 : 2015 | Identical |
| NBN EN 60794 2-30 : 2009 | Identical |
| NEN EN IEC 60794-2-30 : 2009 | Identical |
| I.S. EN 60794-2-30:2008 | Identical |
| PN EN 60794-2-30 : 2008 | Identical |
| SN EN 60794-2-30 : 2003 | Identical |
| VDE 0888-118 : 2009 | Identical |
| DIN EN 60794-2-30 : 2009 | Identical |
| UNE-EN 60794-2-30:2011 | Identical |
| BS EN 60794-2-30:2008 | Identical |
| CEI EN 60794-2-30 : 2010 | Identical |
| UNE-EN 60794-2-30:2008 | Identical |
| BS EN 50377-11-1:2008 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C |
| BS EN 60794-2-31:2013 | Optical fibre cables Indoor cables. Detailed specification for optical fibre ribbon cables for use in premises cabling |
| I.S. EN 60794-2-31:2013 | OPTICAL FIBRE CABLES - PART 2-31: INDOOR CABLES - DETAILED SPECIFICATION FOR OPTICAL FIBRE RIBBON CABLES FOR USE IN PREMISES CABLING (IEC 60794-2-31:2012 (EQV)) |
| EN 50377-11-1:2008 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 11-1: Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C |
| EN 50377-15-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 15-1: Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre |
| CEI EN 60794-2-31 : 2013 | OPTICAL FIBRE CABLES - PART 2-31: INDOOR CABLES - DETAILED SPECIFICATION FOR OPTICAL FIBRE RIBBON CABLES FOR USE IN PREMISES CABLING |
| 17/30353664 DC : 0 | BS EN 50377-18-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 18-1: TYPE 4+4X10.3125 GB/S MPO (QFSP) TRANSCEIVER MATED WITH AN MPO CONNECTOR EQUIPPED WITH 12 FIBRE PPS FERRULES TERMINATED ON EN 60793-2-10 CATEGORY A1A.3A OR A1A.3B 50/125 MICRON MULTIMODE FIBRE |
| 08/30185105 DC : DRAFT JULY 2008 | BS EN 50377-15-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
| I.S. EN 50377-11-1:2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 11-1: TYPE MF TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE FOR CATEGORY C |
| CEI EN 50377-15-1 : 2012 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
| BS EN 50377-15-1:2011 | Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre |
| CEI EN 50377-11-1 : 2009 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 11-1: TYPE MF TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE FOR CATEGORY C |
| I.S. EN 50377-15-1:2011 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 15-1: TYPE MPO WITH 12-FIBRE PPS FERRULES TERMINATED ON IEC 60793-2 CATEGORY A1A MULTIMODE FIBRE FOR 50/125 MICRON MULTIMODE FIBRE |
| EN 60794-2-31:2013 | Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling |
| IEC 60794-3:2014 | Optical fibre cables - Part 3: Outdoor cables - Sectional specification |
| EN 60793-1-20:2014/AC:2016-03 | OPTICAL FIBRES - PART 1-20: MEASUREMENT METHODS AND TEST PROCEDURES - FIBRE GEOMETRY (IEC 60793-1-20:2014/COR1:2016) |
| EN 60793-1-44:2011 | OPTICAL FIBRES - PART 1-44: MEASUREMENT METHODS AND TEST PROCEDURES - CUT-OFF WAVELENGTH |
| IEC 60793-2-10:2017 | Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres |
| EN 60794-2:2017 | Optical fibre cables - Part 2: Indoor cables - Sectional specification |
| IEC 60793-1-44:2011 | Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| IEC 60793-2:2015 | Optical fibres - Part 2: Product specifications - General |
| IEC TR 62222:2012 | Fire performance of communication cables installed in buildings |
| IEC 60304:1982 | Standard colours for insulation for low-frequency cables and wires |
| ISO/IEC 24702:2006 | Information technology Generic cabling Industrial premises |
| EN 60794-3:2015 | Optical fibre cables - Part 3: Sectional specification - Outdoor cables |
| IEC 60794-1-2:2017 | Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance |
| EN 60794-1-1:2016 | Optical fibre cables - Part 1-1: Generic specification - General |
| ISO/IEC 11801:2002 | Information technology Generic cabling for customer premises |
| EN 60793-2-10:2017 | Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres |
| IEC 60794-1-1:2015 | Optical fibre cables - Part 1-1: Generic specification - General |
| EN 60793-1-40:2003 | Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation |
| IEC 60793-1-40:2001 | Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation |
| IEC 60793-1-21:2001 | Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry |
| EN 60793-2:2016 | Optical fibres - Part 2: Product specifications - General |
| IEC 60793-2-50:2015 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres |
| EN 60794-1-2:2017/AC:2017-07 | OPTICAL FIBRE CABLES - PART 1-2: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL GUIDANCE (IEC 60794-1-2:2017) |
| HD 402 : 200S2 | STANDARD COLOURS FOR INSULATION FOR LOW-FREQUENCY CABLES AND WIRES |
| IEC 60811-1-1:1993+AMD1:2001 CSV | Common test methods for insulating and sheathing materials of electric cables and optical cables - Part 1-1: Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties |
| IEC 60794-2:2017 | Optical fibre cables - Part 2: Indoor cables - Sectional specification |
| IEC 60793-1-20:2014 | Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry |
| IEC 60811-1-4:1985 | Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Four: Tests at low temperature |
| EN 60811-1-1:1995/A1:2001 | INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - GENERAL APPLICATION - MEASUREMENT OF THICKNESS AND OVERALL DIMENSIONS - TESTS FOR DETERMINING MECHANICAL PROPERTIES |
| EN 60811-1-4:1995/A2:2001 | INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - PART 1-4: GENERAL APPLICATION - TESTS AT LOW TEMPERATURE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.