EN 60512-99-001:2012
Current
The latest, up-to-date edition.
Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power
19-10-2012
1 Scope and object
2 Normative references
3 General
4 Preparation of specimen
5 Test circuit requirements
6 Tests and test schedule
Annex A (informative) - Test voltage and current
setting instructions
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
IEC 60512-99-001:2012 used for the assessment of connectors within the scope of SC 48B that are used in twisted pair communication cabling with remote power, such as ISO/IEC 11801 Class D, or better, balanced cabling in support of IEEE Std 802.3at - 2009 (latest edition (PoE Plus - Power over Ethernet Plus). The object of this standard is to detail a test schedule to determine the ability of connectors to withstand a minimal number of engagements and separations when an electrical current is being passed through the connector in accordance with IEC 60512-9-3. Keywords: connectors, engaging and separating connectors
| Committee |
CLC/SR 48B
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| NBN EN 60512-99-001 : 2012 | Identical |
| DIN EN 60512-99-001 : 2013 | Identical |
| BS EN 60512-99-001:2012 | Identical |
| VDE 0687-512-99-001 : 2013 | Identical |
| IEC 60512-99-001:2012 | Identical |
| UNE-EN 60512-99-001:2012 | Identical |
| CEI EN 60512-99-001 : 2013 | Identical |
| I.S. EN 60512-99-001:2012 | Identical |
| PN EN 60512-99-001 : 2013 | Identical |
| NEN EN IEC 60512-99-001 : 2012 | Identical |
| NF EN 60512-99-001 : 2013 | Identical |
| PNE-FprEN 60512-99-1 | Identical |
| PD CLC/TR 50174-99-1:2015 | Information technology. Cabling installation Remote powering |
| S.R. CLC/TR 50174-99-1:2015 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 99-1: REMOTE POWERING |
| CLC/TR 50174-99-1:2015 | Information technology - Cabling installation - Part 99-1: Remote powering |
| IEC 60512-3-1:2002 | Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance |
| EN 60512-1-100:2012 | Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications |
| ISO/IEC 11801:2002 | Information technology Generic cabling for customer premises |
| EN 60512-9-3:2011 | Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load |
| IEC 60512-1-1:2002 | Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination |
| IEC 60512-1-100:2012 | Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications |
| IEC 60512-2-1:2002 | Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method |
| IEC 60512-11-7:2003 | Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test |
| IEC TR 62652:2010 | Effects of engaging and separating under electrical load on connector interfaces in cabling used to support IEEE 802.3af (power-over-ethernet) applications |
| IEC 60512-4-1:2003 | Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof |
| IEEE 802.3AT : 2009 | INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 3: CARRIER SENSE MULTIPLE ACCESS WITH COLLISION DETECTION (CSMA/CD) ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS - AMENDMENT 3: DATA TERMINAL EQUIPMENT (DTE) POWER VIA THE MEDIA DEPENDENT INTERFACE (MDI) ENHANCEMENTS |
| IEC 60512-9-3:2011 | Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.