EN 6049-001:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification
Superseded date
29-07-2019
Superseded by
Published date
27-05-2015
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Description
5 Design
6 Definition drawings and mass
7 Test methods
8 Quality assurance
9 Designation
10 Delivery conditions
11 Packaging
12 Marking
13 Storage
This European Standard specifies the general characteristics, qualification and acceptance requirements for protection sleeves in meta-aramid fibres for cable and cable bundles for aerospace application.
| Committee |
ASD-STAN
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DIN EN 6049-001:2018-11 | Identical |
| NF EN 6049-001 : 2015 | Identical |
| DIN EN 6049-001:2015-08 | Identical |
| NEN EN 6049-001 : 2015 | Identical |
| NBN EN 6049-001 : 2015 | Identical |
| NE EN 6049-001:2018 en | Identical |
| ÖNORM EN 6049-001: 2018 | Identical |
| ONORM EN 6049-001 : 2015 | Identical |
| UNI EN 6049-001:2018 | Identical |
| NS EN 6049-001 : 2015 | Identical |
| PN-EN 6049-001:2018 | Identical |
| BS EN 6049-001:2015 | Identical |
| UNI EN 6049-001 : 2016 | Identical |
| SN EN 6049-001 : 2015 | Identical |
| I.S. EN 6049-001:2018 | Identical |
| BS EN 6049-001:2018 | Identical |
| I.S. EN 6049-001:2015 | Identical |
| PN EN 6049-001 : 2015 | Identical |
| UNE-EN 6049-001:2015 | Identical |
| PREN 6049-003 : 200P1 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 003: BRAIDED, TUBULAR, EXPANDABLE - PRODUCT STANDARD |
| BS EN 6049-008:2017 | Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55 °C to 200 °C. Product standard |
| I.S. EN 6049-009:2016 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 009: SELF-WRAPPING FIRE PROTECTION SLEEVE, FLEXIBLE, POST INSTALLATION, OPERATING TEMPERATURE FROM -55 DEGREES C TO 260 DEGREES C - PRODUCT STANDARD |
| BS EN 6049-009:2016 | Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres Self-wrapping fire protection sleeve, flexible, post installation, operating temperature from -55 °C to 260 °C. Product standard |
| NF EN 6049-003 : 2010 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 003: BRAIDED, TUBULAR, EXPANDABLE - PRODUCT STANDARD |
| BS EN 6059-100:2015 | Aerospace series. Electrical cables, installation. Protection sleeves. Test methods General |
| EN 6049-008:2017 | Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from -55 °C to 200 °C - Product standard |
| EN 6049-009:2016 | Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 009: Self-wrapping fire protection sleeve, flexible, post installation, operating temperature from -55 °C to 260 °C - Product standard |
| EN 6059-100:2015 | Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 100: General |
| I.S. EN 6059-100:2015 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 100: GENERAL |
| PREN 6049-008 : 200P3 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 008: SELF-WRAPPING SHIELDED (EMI) PROTECTIVE SLEEVE WITH NICKEL COPPER BRAID, FLEXIBLE POST INSTALLATION OPERATING TEMPERATURE FROM -55 DEGREES C TO 200 DEGREES C - PRODUCT STANDARD |
| I.S. EN 6049-008:2017 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTIVE SLEEVES IN META-ARAMID FIBRES - PART 008: SELF-WRAPPING SHIELDED (EMI) PROTECTIVE SLEEVE WITH NICKEL COPPER BRAID, FLEXIBLE POST INSTALLATION OPERATING TEMPERATURE FROM -55 DEGREES C TO 200 DEGREES C - PRODUCT STANDARD |
| PREN 6059-305 : 200P1 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 305: FLUID ABSORPTION |
| ISO 8815:1994 | Aircraft — Electrical cables and cable harnesses — Vocabulary |
| EN 6059-503:2017 | Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 503: Temperature rise due to rated current injected on the sleeve |
| EN 6049-003:2009 | Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 003: Braided, tubular, expandable - Product standard |
| EN 3844-1:2011 | Aerospace series - Flammability of non metallic materials - Part 1: Small burner test, vertical - Determination of the vertical flame propagation |
| EN 2825:2011 | Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density |
| EN 6059-601:2014 | Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 601: Open and close |
| PREN 6049-005 : 200P2 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 005: SLEEVE FLEXIBLE, POST INSTALLATION - PRODUCT STANDARD |
| PREN 6059-402 : 200P1 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 402: BENDING PROPERTIES |
| PREN 6059-202 : 200P2 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 202: DIMENSIONS AND MASS |
| PREN 6059-203 : 200P1 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - COVERAGE |
| PREN 6059-306 : 200P1 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - MOULD GROWTH |
| EN 6059-502:2014 | Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 502: Resistance to electrical arcs |
| EN 6059-504:2014 | Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 504: Temperature rise within a loom due to self-heating when protected by a sleeve |
| IEC 60096-0-1:2012+AMD1:2017 CSV | Radio frequency cables - Part 1- 0: Guide to the design of detail specifications - Coaxial cables |
| PREN 6059-406 : 200P2 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 406: VIBRATION |
| PREN 6059-308 : 200P1 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 308: RAPID CHANGE OF TEMPERATURE |
| EN 2591-214:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 214: Lightning strike, current and voltage pulse |
| PREN 6059-404 : 200P1 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - TENSILE STRENGTH |
| EN 3475-301:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 301: Ohmic resistance per unit length |
| PREN 6059-403 : 200P1 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - SCRAPE ABRASION |
| EN 6059-501:2010 | Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test |
| PREN 6059-201 : 200P1 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - VISUAL INSPECTION |
| EN 2826:2011 | Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of gas components in the smoke |
| PREN 6059-405 : 200P1 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - DYNAMIC CUT-THROUGH |
| PREN 6049-009 : 200P3 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 009: SELF-WRAPPING FIRE PROTECTION SLEEVE, FLEXIBLE POST INSTALLATION OPERATING TEMPERATURE FROM -55 DEGREES C TO 260 DEGREES C - PRODUCT STANDARD |
| PREN 6059-401 : 200P1 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - EXPANSION RANGE |
| EN 3197:2010 | Aerospace series - Design and installation of aircraft electrical and optical interconnection systems |
| PREN 6059-301 : 200P1 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - SUN LIGHT EXPOSURE |
| PREN 6059-302 : 200P1 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - HIGH TEMPERATURE EXPOSURE |
| EN 2591-307:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist |
| PREN 6049-004 : 200P1 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - BRAIDED, TUBULAR, HIGH EXPANDABLE - PRODUCT STANDARD |
| PREN 6059-303 : 200P3 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 303: RESISTANCE TO FLUIDS |
| EN 6049-007:2012 | Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 007: Self-wrapping mechanical and electrical protective sleeve, flexible post installation operating temperature from - 55 °C to 260 °C - Product standard |
| EN 6049-006:2012 | Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation - Product standard |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.