Customer Support: 131 242

  • Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 60143-1:2015/AC:2017-05

Current

Current

The latest, up-to-date edition.

Series capacitors for power systems - Part 1: General

Amendment of

EN 60143-1:2015

Published date

12-05-2017

FOREWORD
1 Scope and object
2 Normative references
3 Terms and definitions
4 Service conditions
5 Quality requirements and tests
6 Insulation level
7 Overloads, overvoltages and duty cycles
8 Safety requirements
9 Markings and instruction books
10 Guide for selection of ratings, installation and operation
Annex A (normative) - Test requirements and application
        guide for external fuses and units to be externally fused
Annex B (informative) - Economic evaluation of series
        capacitor bank losses
Annex C (informative) - Capacitor bank fusing and unit
        arrangement
Annex D (informative) - Examples of typical connection
        diagrams for large series capacitor installations for
        transmission lines
Annex E (informative) - Precautions to be taken to avoid
        pollution of the environment by polychlorinated
        biphenyls
Bibliography
Annex ZA (normative) - Normative references to
         international publications with their
         corresponding European publications

Committee
SR 33
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Current
Supersedes

BS EN 60143-4:2010 Series capacitors for power systems Thyristors controlled series capacitors
BS EN 60143-3:2015 Series capacitors for power systems Internal fuses
I.S. EN 60143-4:2010 SERIES CAPACITORS FOR POWER SYSTEMS - PART 4: THYRISTOR CONTROLLED SERIES CAPACITORS
BS EN 60519-11:2007 Safety in electroheat installations Particular requirements for installations using the effect of electromagnetic forces on liquid metals
EN 62271-109:2009/A1:2013 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES (IEC 62271-109:2008/A1:2013)
CEI EN 60143-4 : 2012 SERIES CAPACITORS FOR POWER SYSTEMS - PART 4: THYRISTOR CONTROLLED SERIES CAPACITORS
I.S. EN 60143-2:2013 SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENT FOR SERIES CAPACITOR BANKS (IEC 60143-2:2012 (EQV))
BS EN 60143-2:2013 Series capacitors for power systems Protective equipment for series capacitor banks
CEI EN 60143-2 : 2014 SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENT FOR SERIES CAPACITOR BANKS
I.S. EN 60519-3:2005 SAFETY IN ELECTROHEAT INSTALLATIONS - PART 3: PARTICULAR REQUIREMENTS FOR INDUCTION AND CONDUCTION HEATING AND INDUCTION MELTING INSTALLATIONS
BS EN 60519-3:2005 Safety in electroheat installations Particular requirements for induction and conduction heating and induction melting installations
BS EN 60099-9:2014 Surge arresters Metal-oxide surge arresters without gaps for HVDC converter stations
BS EN 62271-109 : 2009 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES
I.S. EN 60519-11:2007 SAFETY IN ELECTROHEAT INSTALLATIONS - PART 11: PARTICULAR REQUIREMENTS FOR INSTALLATIONS USING THE EFFECT OF ELECTROMAGNETIC FORCES ON LIQUID METALS
I.S. EN 60143-3:2015 SERIES CAPACITORS FOR POWER SYSTEMS - PART 3: INTERNAL FUSES
I.S. EN 62271-109:2009 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 109: ALTERNATING-CURRENT SERIES CAPACITOR BY-PASS SWITCHES (IEC 62271-109:2008 (EQV))
EN 60143-3:2015 Series capacitors for power systems - Part 3: Internal fuses
EN 60519-3:2005 Safety in electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations
EN 60099-9:2014 Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations
EN 60143-4:2010 Series capacitors for power systems - Part 4: Thyristor controlled series capacitors
EN 60143-2:2013 Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks
EN 60519-11:2007 Safety in electroheat installations - Part 11: Particular requirements for installations using the effect of electromagnetic forces on liquid metals

IEC 60060-2:2010 High-voltage test techniques - Part 2: Measuring systems
IEC 60143-2:2012 Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks
IEC 60270:2000+AMD1:2015 CSV High-voltage test techniques - Partial discharge measurements
EN 61048:2006/A1:2016 AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS (IEC 61048:2006/A1:2015)
IEC 61048:2006+AMD1:2015 CSV Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements
EN 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
IEC 60050-601:1985 International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General
IEC TS 60815-2:2008 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 2: Ceramic and glass insulators for a.c. systems
EN 60143-3:2015 Series capacitors for power systems - Part 3: Internal fuses
EN 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
EN 60549:2013 High-voltage fuses for the external protection of shunt capacitors
IEC 60909-0:2016 Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
EN 60252-1 : 2011 AMD 1 2013 AC MOTOR CAPACITORS - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDANCE FOR INSTALLATION AND OPERATION (IEC 60252-1:2010/A1:2013)
IEC 60549:2013 High-voltage fuses for the external protection of shunt capacitors
EN 60270:2001/A1:2016 HIGH-VOLTAGE TEST TECHNIQUES - PARTIAL DISCHARGE MEASUREMENTS (IEC 60270:2000/A1:2015)
IEC TR 60996:1989 Method for verifying accuracy of tan delta measurements applicable to capacitors
EN 60060-2:2011 High-voltage test techniques - Part 2: Measuring systems
IEC 61049:1991 Capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements
EN 61049:1993 Capacitors for use in tubular fluorescent and other discharge lamp circuits - Performance requirements
EN 61071:2007 Capacitors for power electronics
EN 60143-2:2013 Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks
IEC 60721-2-6:1990 Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Earthquake vibration and shock
IEC 60871-1:2014 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General
IEC 60273:1990 Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V
EN 60909-0:2016 Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
EN 60071-1:2006/A1:2010 INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES
IEC 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
IEC 60252-1:2010+AMD1:2013 CSV AC motor capacitors - Part 1: General - Performance, testing andrating - Safety requirements - Guidance for installation and operation
IEC 60071-2:1996 Insulation co-ordination - Part 2: Application guide
IEC 60050-436:1990 International Electrotechnical Vocabulary (IEV) - Part 436: Power capacitors
EN 60071-2:1997 Insulation co-ordination - Part 2: Application guide
EN 60110-1:1998 Power capacitors for induction heating installations - Part 1: General
IEC 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
IEC 60071-1:2006+AMD1:2010 CSV Insulation co-ordination - Part 1: Definitions, principles and rules
EN 60871-1:2014 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General
IEC 60143-3:2015 Series capacitors for power systems - Part 3: Internal fuses
IEC TS 60815-1:2008 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 1: Definitions, information and general principles
IEC 60143-4:2010 Series capacitors for power systems - Part 4: Thyristor controlled series capacitors
EN 60143-4:2010 Series capacitors for power systems - Part 4: Thyristor controlled series capacitors
IEEE 693-2005 IEEE Recommended Practice for Seismic Design of Substations
IEC TS 60815-3:2008 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 3: Polymer insulators for a.c. systems
IEC 60110-1:1998 Power capacitors for induction heating installations - Part 1: General

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.