EN 60068-2-47:2005
Current
Current
The latest, up-to-date edition.
Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests
Published date
14-06-2005
Sorry this product is not available in your region.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Mounting where the specimen is a component
6 Mounting where the specimen is equipment
and other articles
7 Mounting, where the specimen is a packaged
product
7.1 Packaging available
7.2 Product normally packaged but packaging not available
8 Information to be given in the relevant specification
Annex A (informative) General guidance
Annex B (informative) Guidance on packaged products
Annex C (informative) Response of a single degree of freedom
(SDOF) system to a half-sine shock pulse
Annex ZA (normative) Normative references to international
publications with their corresponding
European publications
Bibliography
Provides methods for mounting products, whether packaged or unpackaged, as well as mounting requirements for equipment and other articles, for the series of dynamic tests in EN 60068-2, that is impact (Test E), vibration (Test F) and acceleration, steady-state (Test G). When they are fastened to the test apparatus and subjected to these tests, whether packaged or unpackaged, they are referred to as specimens. The major technical changes with regard to the second edition are related to specific guidance on the testing of packaged products.
| Committee |
CLC/SR 104
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 60068-2-47:2005 | Identical |
| CEI 50-6 : 1985 COR 1989 | Identical |
| NEN EN IEC 60068-2-47 : 2005 | Identical |
| DIN EN 60068-2-47:2006-03 | Identical |
| NBN EN 60068 2-47 : 2005 | Identical |
| SN EN 60068-2-47 : 1999 | Identical |
| UNE-EN 60068-2-47:2006 | Identical |
| NF EN 60068-2-47 : 2005 | Identical |
| IEC 60068-2-47:2005 | Identical |
| I.S. EN 60068-2-47:2005 | Identical |
| CEI EN 60068-2-47 : 2006 | Identical |
| PN EN 60068-2-47 : 2005 | Identical |
| NEN 10068-2-47 : 1994 | Identical |
| I.S. EN 62271-2:2003 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - SEISMIC QUALIFICATION FOR RATED VOLTAGES OF 72,5 KV AND ABOVE |
| UNE-EN 61373:2011 | Railway applications - Rolling stock equipment - Shock and vibration tests |
| BS EN 61811-51:2002 | Electromechanical all-or-nothing relays Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Non-standardized types and construction |
| I.S. EN 61373:2010 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS |
| BS EN 61811-54:2002 | Electromechanical non-specified time all-or-nothing relays of assessed quality Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 15 mm x 7,5 mm base |
| CEI EN 60068-2-57 : 2014 | ENVIRONMENTAL TESTING - PART 2-57: TESTS - TEST FF: VIBRATION - TIME HISTORY AND SINE-BEAT METHOD |
| CEI EN 62271-207 : 2014 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 207: SEISMIC QUALIFICATION FOR GAS-INSULATED SWITCHGEAR ASSEMBLIES FOR RATED VOLTAGES ABOVE 52 KV |
| CEI EN 61959 : 2005 | SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - MECHANICAL TESTS FOR SEALED PORTABLE SECONDARY CELLS AND BATTERIES |
| BS EN 60749:1999 | Semiconductor devices. Mechanical and climatic test methods |
| BS EN 60068-2-50:2000 | Environmental testing. Test methods Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat dissipating specimens |
| BS EN 12405-2:2012 | Gas meters. Conversion devices Energy conversion |
| 12/30258463 DC : 0 | BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| BS EN 60068-2-57:2013 | Environmental testing Tests. Test Ff: Vibration. Time-history and sine-beat method |
| BS EN 60127-6:2014 | Miniature fuses Fuse-holders for miniature fuse-links |
| I.S. EN 60068-2-6:2008 | ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL) |
| NF EN 45502-2-3 : 2010 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS |
| I.S. EN 60068-2-81:2003 | ENVIRONMENTAL TESTING - PART 2-81: TESTS - TEST EI: SHOCK - SHOCK RESPONSE SPECTRUM SYNTHESIS |
| UNE-EN 12645:2015 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
| BS EN 12645:2014 | Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing |
| EN 12011 : 1998 | INSTRUMENTATION TO BE USED IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| EN 12405-2:2012 | Gas meters - Conversion devices - Part 2: Energy conversion |
| DIN EN 14154-2:2011-06 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
| EN 61811-51:2002 | Electromechanical all-or-nothing relays - Part 51: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Non-standardized types and construction |
| EN 60068-2-81:2003 | Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis |
| EN 61587-2:2011 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 2: SEISMIC TESTS FOR CABINETS AND RACKS (IEC 61587-2:2011) |
| EN 12645:2014 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
| EN 61811-54:2002 | Electromechanical all-or-nothing relays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15 mm x 7,5 mm base |
| DIN EN 16451:2015-09 | Railway applications - Braking - Brake pad holder |
| BS EN 61811-11:2003 | Electromechanical all-or-nothing relays Blank detail specification. Relays for industrial application |
| I.S. EN 61811-53:2002 | ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 53: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 14 MM X 9 MM BASE |
| BS EN 60068-2-53:2010 | Environmental testing Tests and guidance. Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests |
| CEI EN 61587-2 : 2012 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 2: SEISMIC TESTS FOR CABINETS AND RACKS |
| BS EN 60068-2-27:2009 | Environmental testing Tests. Test Ea and guidance. Shock |
| BS EN 45502-2-3:2010 | Active implantable medical devices Particular requirements for cochlear and auditory brainstem implant systems |
| CEI EN 61373 : 2012 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS |
| BS EN 60068-2-81:2003 | Environmental testing. Test methods Test Ei. Shock. Shock response spectrum synthesis |
| I.S. EN 61587-2:2011 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 2: SEISMIC TESTS FOR CABINETS AND RACKS (IEC 61587-2:2011) |
| BS EN 45502-2-1:2003 | Active implantable medical devices Particular requirements for active implantable medical devices intended to treat bradyarrhythmia (cardiac pacemakers) |
| CEI EN 61587-5 : 2014 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 5: SEISMIC TESTS FOR CHASSIS, SUBRACKS AND PLUG-IN UNITS |
| CEI 216-5/1 : 2002 | ELECTRICAL EQUIPMENT FOR THE DETECTION AND THE MEASUREMENT OF BURNING VAPOURS OR GASES OR TOXIC AND OF OXYGEN FOR CONTINUOUS OPERATION IN FIXED INSTALLATIONS IN NON-HAZARDOUS AREAS - PART 1:GENERAL REQUIREMENTS AND TEST METHODS FOR CONTROL BOARDS AND CONTROL AND SIGNALLING BOARDS |
| EN 50604-1:2016 | Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods |
| I.S. EN 61811-52:2002 | ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 52: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 20 MM X 10 MM BASE |
| I.S. EN 45502-2-2:2008 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-2: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT TACHYARRHYTHMIA (INCLUDES IMPLANTABLE DEFIBRILLATORS) |
| I.S. EN 60068-2-64:2008 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
| DIN EN 12645:2015-02 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
| BS EN 45502-1:2015 | Implants for surgery. Active implantable medical devices General requirements for safety, marking and for information to be provided by the manufacturer |
| BS EN 14154-3 : 2005 | WATER METERS - PART 3: TEST METHODS AND EQUIPMENT |
| I.S. EN 12645:2014 | TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING |
| I.S. EN 45502-1:2015 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| EN 45502-2-2 : 2008 COR 2009 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-2: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT TACHYARRHYTHMIA (INCLUDES IMPLANTABLE DEFIBRILLATORS) |
| UNE-EN 62271-207:2012 | High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV |
| BS EN 62271-207:2012 | High-voltage switchgear and controlgear Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV |
| BS EN 61811-52:2002 | Electromechanical all-or-nothing relays Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 20 mm x 10 mm base |
| 08/30191609 DC : DRAFT DEC 2008 | BS ISO 14708-6 - IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 6: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT TACHYARRHYTHMIA (INCLUDING IMPLANTABLE DEFIBRILLATORS) |
| CEI EN 50604-1 : 1ED 2017 | SECONDARY LITHIUM BATTERIES FOR LIGHT EV (ELECTRIC VEHICLE) APPLICATIONS - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 61587-5:2014 | Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 Seismic tests for chassis, subracks and plug-in units |
| EN 61373:2010/AC:2017-09 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010) |
| UNI EN 12405-2 : 2012 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| BS EN 61811-53:2002 | Electromechanical all-or-nothing relays Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 14 mm x 9 mm base |
| BS EN 50604-1:2016 | Secondary lithium batteries for light EV (electric vehicle) applications General safety requirements and test methods |
| BS EN 61811-55:2002 | Electromechanical non-specified time all-or-nothing relays of assessed quality Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 11 mm x 7,5 mm (max.) base |
| BS EN 61959:2004 | Secondary cells and batteries containing alkaline or other non-acid electrolytes. Mechanical tests for sealed portable secondary cells and batteries |
| BS EN 45502-2-2:2008 | Active implantable medical devices Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes implantable defibrillators) |
| I.S. EN 62271-207:2012 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 207: SEISMIC QUALIFICATION FOR GAS-INSULATED SWITCHGEAR ASSEMBLIES FOR RATED VOLTAGES ABOVE 52 KV (IEC 62271-207:2012 (EQV)) |
| I.S. EN 60068-2-80:2005 | ENVIRONMENTAL TESTING - PART 2-80: TESTS - TEST FI: VIBRATION - MIXED MODE |
| CEI EN 60068-2-27 : 2012 | ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK |
| I.S. EN 60068-2-57:2013 | ENVIRONMENTAL TESTING - PART 2-57: TESTS - TEST FF: VIBRATION - TIME-HISTORY AND SINE-BEAT METHOD (IEC 60068-2-57:2013 (EQV)) |
| UNI EN 54-16 : 2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT |
| BS EN 54-21:2006 | Fire detection and fire alarm systems Alarm transmission and fault warning routing equipment |
| BS EN 14154-2 : 2005 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
| CEI EN 60068-2-64 : 2012 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
| UNE-EN 14154-3:2005 | Water meters - Part 3 : Test methods and equipment |
| UNE-EN 14154-2:2005 | Water meters - Part 2 : Installation and conditions of use |
| EN 45502-1:2015 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| UNI EN 12645 : 2014 | TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING |
| UNI EN 14154-3 : 2011 | WATER METERS - PART 3: TEST METHODS AND EQUIPMENT |
| UNI EN 14154-2 : 2011 | WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE |
| UNI CEI EN 45502-2-3 : 2010 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS |
| UNE-EN 54-16:2010 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
| BS EN 61373:2010 | Railway applications. Rolling stock equipment. Shock and vibration tests |
| BS EN 60068-2-6:2008 | Environmental testing Tests. Test Fc. Vibration (sinusoidal) |
| I.S. EN 12011:1998 | INSTRUMENTATION TO BE USED IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| BS EN 60068-2-80:2005 | Environmental testing Tests - Test Fi: Vibration. Mixed mode |
| BS EN 62271-2:2003 | High-voltage switchgear and controlgear Seismic qualification for rated voltages of 72,5 kV and above |
| 12/30254899 DC : 0 | BS EN 54-2 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
| 13/30233325 DC : 0 | BS EN 45502-1 - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| BS EN 60068-2-51:2000 | Environmental testing. Test methods Tests. Tests Z/BFc. Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens |
| CEI 216-5/3 : 2002 | ELECTRICAL EQUIPMENT FOR THE DETECTION AND THE MEASUREMENT OF FLAMMABLE VAPOURS OR GASES OR TOXIC AND OF OXYGEN FOR CONTINUOUS OPERATION IN FIXED INSTALLATIONS IN NON-HAZARDOUS AREAS - PART 3:GENERAL REQUIREMENTS AND TEST METHODS FOR DETECTORS OF GASES AND FLAMMABLE VAPOURS WITH PROPORTIONAL OUTPUTS |
| I.S. EN 61587-5:2014 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 5: SEISMIC TESTS FOR CHASSIS, SUBRACKS AND PLUG-IN UNITS |
| I.S. EN 16451:2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| I.S. EN 60127-6:2014 | MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS |
| I.S. EN 165000-1:1998 | FILM AND HYBRID INTEGRATED CIRCUITS - PART 1: GENERIC SPECIFICATION CAPABILITY APPROVAL PROCEDURE |
| I.S. EN 45502-2-1:2004 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-1: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT BRADYARRHYTHMIA (CARDIAC PACEMAKERS) |
| CEI EN 60068-2-6 : 2009 | ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL) |
| I.S. EN 60068-2-27:2009 | ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK |
| I.S. EN 54-16:2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT |
| I.S. EN 62391-1:2016 | FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| DIN EN 12101-10:2006-01 | SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES |
| BS EN 12101-10:2005 | Smoke and heat control systems Power supplies |
| BS EN 12011:1998 | Instrumentation to be used in association with non-active surgical implants. General requirements |
| IEC 61959:2004 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries |
| BS EN 54-2 : 1998 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
| IEC 61811-54:2002 | Electromechanical all-or-nothing relays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15 mm x 7,5 mm base |
| UNE-EN 45502-2-3:2010 | Active implantable medical devices -- Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems |
| EN 61811-52:2002 | Electromechanical all-or-nothing relays - Part 52: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 20 mm x 10 mm base |
| EN 54-21:2006 | Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment |
| EN 14154-2:2005+A2:2011 | Water meters - Part 2: Installation and conditions of use |
| EN 16451:2015 | Railway applications - Braking - Brake pad holder |
| EN 45502-2-3:2010 | Active implantable medical devices - Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems |
| EN 54-16:2008 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
| EN 14154-3:2005+A2:2011 | Water meters - Part 3: Test methods and equipment |
| BS EN 16451:2015 | Railway applications. Braking. Brake pad holder |
| PREN 45502-1 : DRAFT 2013 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| CEI EN 62391-1 : 2016 | FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| 04/30105620 DC : DRAFT OCT 2004 | EN 54-21 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 21: ALARM TRANSMISSION AND FAULT WARNING ROUTING EQUIPMENT |
| DIN EN 12405-2:2012-10 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| I.S. EN 61811-55:2002 | ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 55: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 11 MM X 7,5 MM (MAX.) BASE |
| BS EN 54-16:2008 | Fire detection and fire alarm systems Voice alarm control and indicating equipment |
| BS EN 60068-2-64:1995 | Environmental testing. Test methods Test Fh. Vibration, broad-band random (digital control) and guidance |
| UNE-EN 12405-2:2013 | Gas meters - Conversion devices - Part 2: Energy conversion |
| BS EN 61587-2:2011 | Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 Seismic tests for cabinets and racks |
| I.S. EN 61959:2004 | SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - MECHANICAL TESTS FOR SEALED PORTABLE SECONDARY CELLS AND BATTERIES |
| I.S. EN 12405-2:2012 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| CEI 216-5/2 : 2002 | ELECTRICAL EQUIPMENT FOR THE DETECTION AND THE MEASUREMENT OF BURNING VAPOURS OR GASES OR TOXIC AND OF OXYGEN FOR CONTINUOUS OPERATION IN FIXED INSTALLATIONS IN NON-HAZARDOUS AREAS PART 2:GENERAL REQUIREMENTS AND TEST METHODS FOR DETECTORS OF GASES AND FLAMMABLE VAPOURS WITH ONE OR MORE FIXED ALARM LEVELS |
| I.S. EN 45502-2-3:2010 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS |
| I.S. EN 61811-11:2003 | ELECTROMECHANICAL ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 11: BLANK DETAIL SPECIFICATION - RELAYS FOR INDUSTRIAL APPLICATION |
| BS EN 54-4:1998 | Fire detection and fire alarm systems Power supply equipment |
| DIN EN 14154-3:2011-06 | WATER METERS - PART 3: TEST METHODS AND EQUIPMENT |
| EN 45502-1 : 2015 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| EN 61811-55:2002 | Electromechanical all-or-nothing relays - Part 55: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11 mm x 7,5 mm (max.) base |
| EN 62271-207:2012 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 207: SEISMIC QUALIFICATION FOR GAS-INSULATED SWITCHGEAR ASSEMBLIES FOR RATED VOLTAGES ABOVE 52 KV (IEC 62271-207:2012) |
| EN 62271-2:2003 | High-voltage switchgear and controlgear - Part 2: Seismic qualification for rated voltages of 72,5 kV and above |
| EN 61811-11:2003 | Electromechanical elementary relays of assessed quality - Part 11: Blank detail specification - Relays for industrial application |
| EN 61811-53:2002 | Electromechanical all-or-nothing relays - Part 53: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 14 mm x 9 mm base |
| DIN EN 54-21:2006-08 | Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment |
| EN 60068-2-57:2013 | Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| EN 45502-2-2 : 2008 COR 2009 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-2: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT TACHYARRHYTHMIA (INCLUDES IMPLANTABLE DEFIBRILLATORS) |
| EN 60068-2-80:2005 | Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode |
| EN 61587-5:2014 | Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5: Seismic tests for chassis, subracks and plug-in units |
| EN 165000-1:1996 | Film and hybrid integrated circuits - Part 1: Generic specification - Capability approval procedure |
| EN 60068-2-27:2009 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| DIN EN 54-16:2008-06 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
| EN 60068-2-53:2010 | Environmental testing - Part 2-53: Tests and guidance: Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests |
| EN 60068-2-64:2008 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
| EN 61959:2004 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries |
| EN 62391-1:2016/AC:2016-12 | FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 62391-1:2015/COR1:2016) |
| EN 60127-6:2014 | Miniature fuses - Part 6: Fuse-holders for miniature fuse-links |
| EN 60749 : 99 AMD 2 2001 | SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS |
| EN 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| EN 60068-2-57:2013 | Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEC 60068-2-81:2003 | Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis |
| IEC 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-57:2013 | Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method |
| EN 60068-2-64:2008 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
| EN 60068-2-65:2013 | Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method |
| EN 60068-2-59:1993 | Environmental testing - Part 2: Test methods - Test Fe: Vibration - Sine beat method |
| EN 60068-2-7:1993 | Environmental testing - Part 2: Tests - Test Ga: Acceleration, steady state |
| IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
| IEC 60068-2-64:2008 | Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance |
| EN 60068-2-27:2009 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| EN 60068-2-55:2013 | Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce |
| EN 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| EN 60068-2-29:1993 | Environmental testing - Part 2: Tests - Test Eb and guidance: Bump |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| IEC 60068-2-29:1987 | Environmental testing. Part 2: Tests. Test Eb and guidance: Bump |
| ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
| IEC 60068-2-55:2013 | Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce |
| EN 60068-2-32:1993 | Basic environmental testing procedures - Part 2: Tests - Test Ed: Free fall |
| EN 60068-2-81:2003 | Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis |
| IEC 60068-2-65:2013 | Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method |
| EN 60068-2-31:2008 | ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS |
| IEC 60068-2-59:1990 | Environmental testing. Part 2: Tests. Test Fe: Vibration - Sine-beat method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.