EN 60068-2-17:1994
Current
Current
The latest, up-to-date edition.
Environmental testing - Part 2: Tests - Test Q: Sealing
Published date
29-08-1994
Sorry this product is not available in your region.
Committees responsible
National foreword
Foreword
Survey of sealing tests
1. Definitions
2. Test Qa: Sealing of bushes, spindles and gaskets
2.1 Object
2.2 Scope
2.3 General description of the test
2.4 Initial measurements
2.5 Conditions
2.6 Final measurements
2.7 Information to be given
3. Test Qc: Container sealing, gas leakage
3.1 Object
3.2 Scope
3.3 General description of the test
3.4 Test Method 1
3.5 Test Method 2
3.6 Test Method 3
3.7 Information to be given in the relevant specification
4. Test Qd: Container sealing, seepage of filling liquid
4.1 Object
4.2 Scope
4.3 General description of the test
4.4 Severities
4.5 Preconditioning
4.6 Initial measurements
4.7 Conditioning
4.8 Final measurements
4.9 Information to be given in the relevant specification
5. Test Qf: Immersion
5.1 Object
5.2 General description of the test
5.3 Initial measurements
5.4 Preconditioning
5.5 Conditioning
5.6 Recovery
5.7 Final measurements
5.8 Information to be given in the relevant specification
6. Test Qk: Sealing tracer gas method with mass
spectrometer
6.1 Object
6.2 Scope
6.3 General description of the test
6.4 Test Method 1 (for specimens not filled with helium
during manufacturing)
6.5 Test Method 2 (for specimens filled with helium during
manufacturing or for the requirements of this test)
6.6 Test Method 3 (applicable to specimens to be mounted
on bulkheads or panels)
6.7 Information to be given in the relevant specification
7. Test Ql: Bomb pressure test
7.1 Object
7.2 Scope
7.3 General description of the test
7.4 Initial measurements
7.5 Conditioning
7.6 Recovery
7.7 Final measurements
7.8 Information to be given in the relevant specification
8. Test Qm: Tracer gas sealing test with internal
pressurization
8.1 Object
8.2 Scope
8.3 General description of the test
8.4 Pre-conditioning
8.5 Conditioning
8.6 Information to be given in the relevant specification
9. Test Qy: Pressure rise sealing test
9.1 Object
9.2 Scope
9.3 General description of the test
9.4 Calibration of the test equipment
9.5 Information to be given in the relevant specification
Annexes
A. Example of a test chamber for Test Qa
B. Guidance for Test Qc
C. Guidance for Test Qd
D. Interrelation of test parameters for Test Qk
E. Guidance for Test Qk
F. Guidance for Test Ql
G. Guidance for Test Qm
H. Guidance for Test Qy
Includes a number of tests which use different conditioning procedures appropriate for different application.
| Committee |
CLC/SR 104
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 60068 2-17 : 1995 | Identical |
| SN EN 60068-2-17 : 1994 | Identical |
| BS EN 60068-2-17:1995 | Identical |
| PN EN 60068-2-17 : 2001 | Identical |
| NEN 10068-2-17 : 1994 | Identical |
| CEI EN 60068-2-17 : 1997 | Identical |
| IEC 60068-2-17:1994 | Identical |
| UNE-EN 60068-2-17:1996 | Identical |
| NF EN 60068 2-17 : 1995 | Identical |
| I.S. EN 60068-2-17:1995 | Identical |
| DS EN 60068-2-17 : 1997 | Identical |
| DIN EN 60068-2-17:1995-05 | Identical |
| UNI EN 1300 : 2014 | SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING |
| CEI EN 61462 : 2008 | COMPOSITE HOLLOW INSULATORS - PRESSURIZED AND UNPRESSURIZED INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGE GREATER THAN 1000 V - DEFINITIONS, TEST METHODS, ACCEPTANCE CRITERIA AND DESIGN RECOMMENDATIONS |
| BS EN 60862-1:2015 | Surface acoustic wave (SAW) filters of assessed quality Generic specification |
| I.S. EN 60358-1:2012 | COUPLING CAPACITORS AND CAPACITOR DIVIDERS - PART 1: GENERAL RULES (IEC 60358-1:2012 (EQV)) |
| BS EN 61869-1:2009 | Instrument transformers General requirements |
| BS EN 61811-51:2002 | Electromechanical all-or-nothing relays Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Non-standardized types and construction |
| BS EN 60938-1:2000 | Fixed inductors for electromagnetic interference suppression Generic specification |
| BS EN 61811-54:2002 | Electromechanical non-specified time all-or-nothing relays of assessed quality Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 15 mm x 7,5 mm base |
| BS EN 62575-1:2016 | Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality Generic specification |
| I.S. EN 61810-1:2015 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| I.S. EN 62604-1:2015 | SURFACE ACOUSTIC WAVE (SAW) AND BULK ACOUSTIC WAVE (BAW) DUPLEXERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| BS EN 50526-1:2012 | Railway applications. Fixed Installations. D.C. surge arresters and voltage limiting devices Surge arresters |
| BS EN 61300-2-23:1997 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests Sealing for non-pressurized closures of fibre optic devices |
| BS EN 60939-1:2010 | Passive filter units for electromagnetic interference suppression Generic specification |
| BS EN 60749:1999 | Semiconductor devices. Mechanical and climatic test methods |
| BS EN 61248-1:1997 | Transformers and inductors for use in electronic and telecommunication equipment Generic specification |
| BS EN 60539-1:2016 | Directly heated negative temperature coefficient thermistors Generic specification |
| 17/30333935 DC : 0 | BS EN 1300 - SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING |
| BS EN 62884-1:2017 | Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Basic methods for the measurement |
| I.S. EN 60749-8:2003 | SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 8: SEALING |
| 11/30251478 DC : 0 | BS EN 1300 - SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING |
| UNE-EN 1300:2014 | Secure storage units - Classification for high security locks according to their resistance to unauthorized opening |
| BS EN 60384-1:2016 | Fixed capacitors for use in electronic equipment Generic specification |
| I.S. EN 61881-3:2012 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS (IEC 61881-3:2012 (EQV)) |
| CEI EN 60749-8 : 2004 | SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS - PART 8: SEALING |
| BS EN 61881-3 : 2012 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS |
| BS EN 60749-8:2003 | Semiconductor devices. Mechanical and climatic test methods Sealing |
| I.S. EN 60044-8:2002 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| CEI EN 50526-1 : 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| I.S. EN 60694:1999 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| I.S. EN 61810-7:2006 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES |
| I.S. EN 60939-3:2015 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE |
| I.S. EN 62575-1:2016 | RADIO FREQUENCY (RF) BULK ACOUSTIC WAVE (BAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| UNE-EN 60099-4:2016 | Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems |
| I.S. EN 61248-1:1998 | TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| EN 60137:2017 | Insulated bushings for alternating voltages above 1 000 V |
| I.S. EN 60939-1:2010 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION |
| EN 60749-8:2003 | Semiconductor devices - Mechanical and climatic test methods - Part 8: Sealing |
| EN 61811-51:2002 | Electromechanical all-or-nothing relays - Part 51: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Non-standardized types and construction |
| EN 60747-5-2:2001/A1:2002 | DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - PART 5-2: OPTOELECTRONIC DEVICES - ESSENTIAL RATINGS AND CHARACTERISTICS |
| EN 61019-1:2005 | Surface acoustic wave (SAW) resonators - Part 1: Generic specification |
| EN 62246-1:2015 | Reed switches - Part 1: Generic specification |
| EN 60694:1996/A2:2001 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| EN 60939-1:2010 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION |
| EN 62435-5:2017 | Electronic components - Long-term storage of electronic semiconductor devices - Part 5: Die and wafer devices |
| CLC/TS 50466:2006 | Long duration storage of electronic components - Specification for implementation |
| EN 61811-54:2002 | Electromechanical all-or-nothing relays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15 mm x 7,5 mm base |
| EN 62604-1:2015 | Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification |
| EN 61881-2 : 2012 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE (IEC 61881-2:2012) |
| 09/30200407 DC : 0 | BS EN 50526-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| BS EN 60689:2009 | Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values |
| BS EN 60358-1:2012 | Coupling capacitors and capacitor dividers General rules |
| BS EN 61462:2007 | Composite hollow insulators. Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1000 V. Definitions, test methods, acceptance criteria and design recommendations |
| CEI EN 60939-2 : 2005 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 2: SECTIONAL SPECIFICATION: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE - TEST METHODS AND GENERAL REQUIREMENTS |
| I.S. EN 61811-53:2002 | ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 53: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 14 MM X 9 MM BASE |
| I.S. EN 61811-54:2002 | ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 54: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 15 MM X 7,5 MM BASE |
| I.S. EN 61462:2007 | COMPOSITE HOLLOW INSULATORS - PRESSURIZED AND UNPRESSURIZED INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGE GREATER THAN 1 000 V - DEFINITIONS, TEST METHODS, ACCEPTANCE CRITERIA AND DESIGN RECOMMENDATIONS |
| BS EN 61810-7:2006 | Electromechanical elementary relays Test and measurement procedures |
| BS EN IEC 62246-1-1:2018 | Reed switches Generic specification. Blank detail specification |
| BS EN 60747-5-5 : 2011 | SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS |
| CEI EN 60393-1 : 2010 | POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| I.S. CLC TS 50466:2006 | LONG DURATION STORAGE OF ELECTRONIC COMPONENTS - SPECIFICATION FOR IMPLEMENTATION |
| I.S. EN 60384-1:2016 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| CEI EN 61810-1 : 2016 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| BS EN 60044-8:2002 | Instrument transformers Electronic current transformers |
| I.S. EN 61811-52:2002 | ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 52: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 20 MM X 10 MM BASE |
| I.S. EN 165000-1:1998 | FILM AND HYBRID INTEGRATED CIRCUITS - PART 1: GENERIC SPECIFICATION CAPABILITY APPROVAL PROCEDURE |
| I.S. EN 61019-1:2005 | SURFACE ACOUSTIC WAVE (SAW) RESONATORS - PART 1: GENERIC SPECIFICATION |
| I.S. EN 62246-1:2015 | REED SWITCHES - PART 1: GENERIC SPECIFICATION |
| EN 62884-1:2017 | Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement |
| I.S. EN 60384-14:2016 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS |
| I.S. EN 60137:2017 | INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V |
| CEI EN 61881-2 : 2013 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE |
| CEI EN 61300-2-23 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-23: TESTS - SEALING FOR NON-PRESSURIZED CLOSURES OF FIBRE OPTIC DEVICES |
| EN IEC 62246-1-1:2018 | Reed switches - Part 1-1: Generic specification - Blank detail specification |
| I.S. EN 60368-1:2000 | PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| DIN EN 1300:2014-05 | SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING |
| UNE-EN 60068-2-14:2011 | Environmental testing -- Part 2-14: Tests - Test N: Change of temperature |
| CEI EN 60068-2-14 : 2011 | ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE |
| CEI CLC/TS 50466 : 2006 | LONG DURATION STORAGE OF ELECTRONIC COMPONENTS - SPECIFICATION FOR IMPLEMENTATION |
| BS EN 61811-52:2002 | Electromechanical all-or-nothing relays Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 20 mm x 10 mm base |
| EN 61810-1:2015/AC:2018-04 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS (IEC 61810-1:2015/COR1:2018) |
| BS EN 61811-1:2015 | Electromechanical telecom elementary relays of assessed quality Generic specification and blank detail specification |
| BS EN 62772:2016 | Composite hollow core station post insulators for substations with a.c. voltage greater than 1 000 V and d.c. voltage greater than 1 500 V. Definitions, test methods and acceptance criteria |
| BS EN 60393-1:2009 | Potentiometers for use in electronic equipment Generic specification |
| BS EN 62246-1:2015 | Reed switches Generic specification |
| UNE-EN 60137:2011 | Insulated bushings for alternating voltages above 1 000 V |
| BS EN 61169-1:2013 | Radio-frequency connectors Generic specification. General requirements and measuring methods |
| BS EN 61811-53:2002 | Electromechanical all-or-nothing relays Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 14 mm x 9 mm base |
| BS EN 120000:1996 | Harmonized system of quality assessment for electronic components. General specification: semiconductor optoelectronic and liquid crystal devices |
| BS EN 60368-1:2000 | Piezoelectric filters Generic specification |
| CEI EN 60368-1 : 2006 | PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| BS EN 61881-2:2012 | Railway applications. Rolling stock equipment. Capacitors for power electronics Aluminium electrolytic capacitors with non solid electrolyte |
| BS EN 61811-55:2002 | Electromechanical non-specified time all-or-nothing relays of assessed quality Blank detail specification. Electromechanical all-or-nothing telecom relays of assessed quality. Two change-over contacts, 11 mm x 7,5 mm (max.) base |
| BS EN 1300:2013 | Secure storage units. Classification for high security locks according to their resistance to unauthorized opening |
| CEI EN 62884-1 : 1ED 2018 | MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT |
| BS EN 60939-2:2005 | Passive filter units for electromagnetic interference suppression Sectional specification: passive filter units for which safety tests are appropriate. Test methods and general requirements |
| BS EN 60137:2017 | Insulated bushings for alternating voltages above 1000 V |
| PREN 50526-1 : DRAFT 2009 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| I.S. EN 60068-2-14:2009 | ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE |
| I.S. EN 62884-1:2017 | MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT |
| CEI EN 60747-5-2 : 2002 | DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - PART 5-2: OPTOELECTRONIC DEVICES - ESSENTIAL RATINGS AND CHARACTERISTICS |
| I.S. EN 60393-1:2009 | POTENTIOMETERS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| I.S. EN 60938-1:1999 | FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION |
| UNE-EN 61869-1:2010 | Instrument transformers -- Part 1: General requirements |
| EN 1300:2013 | Secure storage units - Classification for high security locks according to their resistance to unauthorized opening |
| BS EN 60694:1997 | Common specifications for high-voltage switchgear and controlgear standards |
| BS EN 62604-1:2015 | Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality Generic specification |
| CEI EN 60044-8 : 2004 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS |
| I.S. EN 61869-1:2009 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| BS EN 60747-5-2:2001 | Discrete semiconductor devices and integrated circuits. Optoelectronic devices Essential ratings and characteristics |
| BS EN 60939-3:2015 | Passive filter units for electromagnetic interference suppression Passive filter units for which safety tests are appropriate |
| DD CLC/TS 50466:2006 | Long duration storage of electronic components. Specification for implementation |
| EN 60939-3:2015/AC:2016-04 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE (IEC 60939-3:2015/COR1:2016) |
| BS EN 60068-2-14:2009 | Environmental testing Tests. Test N. Change of temperature |
| BS EN 60099-9:2014 | Surge arresters Metal-oxide surge arresters without gaps for HVDC converter stations |
| BS EN 60122-1 : 2002 | QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| BS EN 61810-1:2015 | Electromechanical elementary relays General and safety requirements |
| I.S. EN IEC 62246-1-1:2018 | REED SWITCHES - PART 1-1: GENERIC SPECIFICATION - BLANK DETAIL SPECIFICATION |
| I.S. EN 60539-1:2016 | DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION |
| I.S. EN 50526-1:2012 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| I.S. EN 60747-5-5:2011 | SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS |
| CEI EN 61810-7 : 2006 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES |
| EN 60384-1:2016 | Fixed capacitors for use in electronic equipment - Part 1: Generic specification |
| I.S. EN 61020-1:2009 | ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| I.S. EN 61169-1:2013 | RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS |
| I.S. EN 1300:2013 | SECURE STORAGE UNITS - CLASSIFICATION FOR HIGH SECURITY LOCKS ACCORDING TO THEIR RESISTANCE TO UNAUTHORIZED OPENING |
| EN 61169-1:2013/AC:2016-02 | RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013) |
| EN 60938-1:1999/A1:2007 | FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION |
| EN 60539-1:2016/AC:2017-09 | DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION (IEC 60539-1:2016/COR1:2017) |
| EN 60358-1:2012 | COUPLING CAPACITORS AND CAPACITOR DIVIDERS - PART 1: GENERAL RULES (IEC 60358-1:2012) |
| IEC 61811-54:2002 | Electromechanical all-or-nothing relays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15 mm x 7,5 mm base |
| UNE-EN 61300-2-23:2011 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices |
| BS EN 62435-5:2017 | Electronic components. Long-term storage of electronic semiconductor devices Die and wafer devices |
| IEC 60747-5-2:1997+AMD1:2002 CSV | Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics |
| EN 61811-1:2015 | Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification |
| EN 61811-52:2002 | Electromechanical all-or-nothing relays - Part 52: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 20 mm x 10 mm base |
| EN 61462:2007 | Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations |
| EN 60862-1:2015 | Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification |
| UNE-EN 50526-1:2012 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters |
| BS EN 61019-1:2005 | Surface acoustic wave (SAW) resonators Generic specification |
| I.S. EN 62146-1:2014 | GRADING CAPACITORS FOR HIGH-VOLTAGE ALTERNATING CURRENT CIRCUIT-BREAKERS - PART 1: GENERAL |
| I.S. EN 61811-51:2002 | ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 51: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - NON-STANDARDIZED TYPES AND CONSTRUCTION |
| CEI EN 60384-14 : 2014 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS |
| BS EN 61020-1:2009 | Electromechanical switches for use in electrical and electronic equipment Generic specification |
| UNE-EN 61020-1:2011 | Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification |
| I.S. EN 61300-2-23:2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-23: TESTS - SEALING FOR NON-PRESSURIZED CLOSURES OF FIBRE OPTIC DEVICES |
| I.S. EN 61811-55:2002 | ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 55: BLANK DETAIL SPECIFICATION - ELECTROMECHANICAL ALL-OR-NOTHING TELECOM RELAYS OF ASSESSED QUALITY - TWO CHANGE-OVER CONTACTS, 11 MM X 7,5 MM (MAX.) BASE |
| CEI EN 60539-1 : 2009 | DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION |
| BS EN 62146-1 : 2014 | GRADING CAPACITORS FOR HIGH-VOLTAGE ALTERNATING CURRENT CIRCUIT-BREAKERS - PART 1: GENERAL (IEC 62146-1:2013) |
| CEI EN 61869-1 : 2010 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 61881-2:2012 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE (IEC 61881-2:2012 (EQV)) |
| I.S. EN 60099-9:2014 | SURGE ARRESTERS - PART 9: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR HVDC CONVERTER STATIONS |
| CEI EN 60099-9 : 2015 | SURGE ARRESTERS - PART 9: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR HVDC CONVERTER STATIONS |
| I.S. EN 60122-1:2002 AMD 1 2018 | QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| I.S. EN 60862-1:2015 | SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| I.S. EN 61811-1:2015 | ELECTROMECHANICAL TELECOM ELEMENTARY RELAYS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION AND BLANK DETAIL SPECIFICATION |
| CEI EN 60137 : 2009 | INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1000 V |
| CEI EN 60939-1 : 2011 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION |
| I.S. EN 116000-3:1998 | GENERIC SPECIFICATION: ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 3: TEST AND MEASUREMENT PROCEDURES |
| EN 60747-5-5:2011/A1:2015 | SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS (IEC 60747-5-5:2007/A1:2013) |
| EN 61300-2-23:2011 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices |
| EN 61811-55:2002 | Electromechanical all-or-nothing relays - Part 55: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11 mm x 7,5 mm (max.) base |
| EN 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| EN 61811-53:2002 | Electromechanical all-or-nothing relays - Part 53: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 14 mm x 9 mm base |
| EN 62146-1:2014/A1:2016 | GRADING CAPACITORS FOR HIGH-VOLTAGE ALTERNATING CURRENT CIRCUIT-BREAKERS - PART 1: GENERAL (IEC 62146-1:2013/A1:2016) |
| EN 61248-1 : 1997 | Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification |
| EN 60122-1:2002/A1:2018 | QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION (IEC 60122-1:2002/A1:2017) |
| EN 61869-1:2009 | Instrument transformers - Part 1: General requirements |
| EN 60368-1:2000/A1:2004 | PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| EN 60099-9:2014 | Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations |
| EN 60939-2:2005 | Passive filter units for electromagnetic interference suppression - Part 2: Sectional specification: Passive filter units for which safety tests are appropriate - Test methods and general requirements |
| EN 61810-7:2006 | Electromechanical elementary relays - Part 7: Test and measurement procedures |
| EN 62575-1:2016 | Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1: Generic specification |
| EN 165000-1:1996 | Film and hybrid integrated circuits - Part 1: Generic specification - Capability approval procedure |
| EN 116000-3 : 1996 | GENERIC SPECIFICATION: ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 3: TEST AND MEASUREMENT PROCEDURES |
| EN 50526-1:2012 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters |
| EN 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
| EN 61881-3:2012/A1:2013 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS (IEC 61881-3:2012/A1:2013) |
| EN 60393-1:2009 | Potentiometers for use in electronic equipment - Part 1: Generic specification |
| EN 61020-1:2009 | Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification |
| EN 60749 : 99 AMD 2 2001 | SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.