EN 50174-3:2013/A1:2017
Current
Current
The latest, up-to-date edition.
INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
Published date
12-05-2017
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope and conformance
2 Normative references
3 Terms, definitions and abbreviations
4 Requirements for planning installations of
information technology cabling
5 Requirements for the installation of
information technology cabling
6 Segregation
7 Additional installation practices for
specific sites and services
Annex A (informative) - EMC and protection
Annex B (informative) - Earth potential rise (EPR)
Annex C (informative) - Application of responsibilities
Annex D (informative) - A-deviations
Bibliography
Describes requirements and gives recommendations for the following aspects of information technology cabling: a) planning; b) installation practice.
| Committee |
TC 215
|
| DevelopmentNote |
Supersedes PREN 50174-3. (10/2013)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| CEI EN 50174-3/A1:2018 | Identical |
| NF EN 50174-3 : 2014 AMD 1 2017 | Identical |
| SN EN 50174-3 : 2013 AMD 1 2017 | Identical |
| PN EN 50174-3 : 2014 AMD 1 2017 | Identical |
| BS EN 50174-3 : 2013 | Identical |
| UNE-EN 50174-3:2005 | Identical |
| NBN EN 50174-3 : 2013 | Identical |
| CEI EN 50174-3/A1 : 2018 | Identical |
| DIN EN 50174-3 : 2017 | Identical |
| CEI EN 50174-3 : 2014 | Identical |
| I.S. EN 50174-3:2013 | Identical |
| NEN EN 50174-3 : 2013 AMD 1 2017 | Identical |
| UNE-EN 50174-3:2013/A1:2017 | Identical |
| PNE-EN 50174-3:2013/FprA1:2016 | Identical |
| BS EN 50174-3:2013+A1:2017 | Identical |
| VDE 0800-174-3 : 2017 | Identical |
| 12/30268386 DC : 0 | BS EN 50700 - INFORMATION TECHNOLOGY - PREMISES DISTRIBUTION ACCESS NETWORK (PDAN) CABLING TO SUPPORT DEPLOYMENT OF OPTICAL BROADBAND NETWORKS |
| PREN 50700 : DRAFT 2012 | INFORMATION TECHNOLOGY - PREMISES DISTRIBUTION ACCESS NETWORK (PDAN) CABLING TO SUPPORT DEPLOYMENT OF OPTICAL BROADBAND NETWORKS |
| NF EN 50173-2 : 2010 AMD 1 2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 2: OFFICE PREMISES |
| I.S. EN 50173-4:2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
| BS EN 60728-11:2017 | Cable networks for television signals, sound signals and interactive services Safety |
| S.R. CLC/TR 50584:2014 | INFORMATION TECHNOLOGY - CENELEC/ETSI GLOSSARY OF TERMS AND DEFINITIONS FOR BROADBAND DEPLOYMENT INCLUDING SUSTAINABILITY ASPECTS |
| UNE-EN 50468:2010 | Resistibility requirements to overvoltages and overcurrents due to lightning for equipment having telecommunication ports |
| I.S. EN 50346:2003 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - TESTING OF INSTALLED CABLING |
| EN 50289-4-14:2003 | Communication cables - Specifications for test methods - Part 4-14: Environmental test methods - Lightning |
| EN 50700:2014 | Information technology - Premises distribution access network (PDAN) cabling to support deployment of optical broadband networks |
| EN 50346 : 2002 AMD 2 2009 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - TESTING OF INSTALLED CABLING |
| EN 50173-6:2013 | Information technology - Generic cabling systems - Part 6: Distributed building services |
| EN 50600-2-1:2014 | Information technology - Data centre facilities and infrastructures - Part 2-1: Building construction |
| CEI CWA 50487 : 2006 | SMARTHOUSE CODE OF PRACTICE |
| BS EN 50600-2-1:2014 | Information technology. Data centre facilities and infrastructures Building construction |
| 16/30339543 DC : 0 | BS EN 62820-3-2 ED 1.0 - BUILDING INTERCOM SYSTEMS - PART 3-2: APPLICATION GUIDELINES - ADVANCED SECURITY BUILDING INTERCOM |
| I.S. EN 50600-2-2:2014 | INFORMATION TECHNOLOGY - DATA CENTRE FACILITIES AND INFRASTRUCTURES - PART 2-2: POWER DISTRIBUTION |
| EN 50174-2 : 2009 AMD 2 2014 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
| I.S. EN 61000-1-2:2016 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA |
| I.S. EN 50173-2:2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 2: OFFICE PREMISES |
| BS EN 50600-2-2:2014 | Information technology. Data centre facilities and infrastructures Power distribution |
| I.S. EN 50173-3:2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 3: INDUSTRIAL PREMISES |
| EN 50173-4 : 2007 AMD 2 2012 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
| BS EN 50174-1 : 2009 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE |
| NF EN 50173-4 : 2010 AMD 2 2013 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
| CLC/TR 50584:2014 | Information technology - CENELEC/ETSI Glossary of terms and definitions for broadband deployment including sustainability aspects |
| IEC TS 61000-1-2:2008 | Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
| EN 50310:2016 | Telecommunications bonding networks for buildings and other structures |
| UNE-HD 60364-4-444:2013 | Low-voltage electrical installations -- Part 4-444: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
| UNE-EN 50310:2016 | Telecommunications bonding networks for buildings and other structures |
| CEI CLC/TR 50173-99-3 : 2013 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 99-3: HOME CABLING INFRASTRUCTURES UP TO 50 M IN LENGTH TO SUPPORT SIMULTANEOUS AND NON SIMULTANEOUS PROVISION OF APPLICATIONS |
| PREN 50173-6 : DRAFT 2012 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 6: DISTRIBUTED BUILDING SERVICES |
| I.S. EN 50600-2-1:2014 | INFORMATION TECHNOLOGY - DATA CENTRE FACILITIES AND INFRASTRUCTURES - PART 2-1: BUILDING CONSTRUCTION |
| EN 60728-11:2017 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
| 17/30361394 DC : 0 | BS EN 50174-1 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE |
| DD IEC/TS 61000-1-2:2001 | Electromagnetic compatibility (EMC). General Methodology for the achievement of the functional safety of electrical and electronic equipment with regard to electromagnetic phenomena |
| BS EN 50346 : 2002 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - TESTING OF INSTALLED CABLING |
| BS EN 50289-4-14:2003 | Communication cables. Specifications for test methods. Environmental test methods Lightning |
| 07/30152812 DC : DRAFT AUG 2007 | BS EN 50174-2 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
| 08/30191345 DC : 0 | BS EN 60728-11 ED.3 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY |
| CEI EN 50468 : 2010 | RESISTIBILITY REQUIREMENTS TO OVERVOLTAGES AND OVERCURRENTS DUE TO LIGHTNING FOR EQUIPMENT HAVING TELECOMMUNICATION PORTS |
| IEC 60728-11:2016 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
| 01/637057 DC : DRAFT AUG 2001 | DRAFT EN 50173 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS |
| I.S. EN 50174-1:2009 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE |
| BS EN 50173-2 : 2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 2: OFFICE PREMISES |
| BS EN 50173-1:2011 | Information technology. Generic cabling systems General requirements |
| EN 50173-5 : 2007 AMD 2 2012 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 5: DATA CENTRES |
| I.S. EN 50310:2016 | TELECOMMUNICATIONS BONDING NETWORKS FOR BUILDINGS AND OTHER STRUCTURES |
| EN 50173-1:2011 | Information technology - Generic cabling systems - Part 1: General requirements |
| UNE-EN 60728-11:2012 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
| EN 50600-2-2:2014 | Information technology - Data centre facilities and infrastructures - Part 2-2: Power distribution |
| EN 50468:2009 | Resistibility requirements to overvoltages and overcurrents due to lightning for equipment having telecommunication ports |
| BS 7083:1996 | Guide to the accommodation and operating environment for information technology (IT) equipment |
| NF EN 50173-5 : 2010 AMD 2 2013 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 5: DATA CENTERS |
| BS EN 61000-1-2:2016 | Electromagnetic compatibility (EMC) General. Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
| EN 50173-3 : 2007 COR 2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 3: INDUSTRIAL PREMISES |
| BS EN 50700:2014 | Information technology. Premises distribution access network (PDAN) cabling to support deployment of optical broadband networks |
| 02/209118 DC : DRAFT SEP 2002 | PREN 50289-4-14 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-14: ENVIRONMENTAL TEST METHODS - LIGHTNING |
| BS EN 50173-3 : 2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 3: INDUSTRIAL PREMISES |
| I.S. EN 60728-11:2017 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY |
| CEI EN 50173-1 : 2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 50468:2009 | RESISTIBILITY REQUIREMENTS TO OVERVOLTAGES AND OVERCURRENTS DUE TO LIGHTNING FOR EQUIPMENT HAVING TELECOMMUNICATION PORTS |
| PREN 50174-1 : DRAFT 2017 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE |
| I.S. EN 50173-5:2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 5: DATA CENTRES |
| I.S. EN 50174-2:2009 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
| I.S. HD 60364-4-444:2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-444: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES |
| IEC 62820-3-2:2018 | Building intercom systems - Part 3-2: Application guidelines - Advanced security building intercom systems (ASBIS) |
| EN 50174-1:2009/A2:2014 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE |
| 09/30205182 DC : 0 | BS EN 50310 - APPLICATION OF EQUIPOTENTIAL BONDING AND EARTHING IN BUILDINGS WITH INFORMATION TECHNOLOGY EQUIPMENT |
| 05/30133440 DC : DRAFT MAY 2005 | EN 50310 ED 2 - APPLICATION OF EQUIPOTENTIAL BONDING AND EARTHING IN BUILDINGS WITH INFORMATION TECHNOLOGY EQUIPMENT |
| 17/30361391 DC : 0 | BS EN 50174-2 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
| IEC 61000-1-2:2016 | Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
| BS EN 50310:2016 | Telecommunications bonding networks for buildings and other structures |
| BS EN 50173-6:2013 | Information technology. Generic cabling systems Distributed building services |
| I.S. EN 50173-1:2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| 12/30185217 DC : 0 | BS EN 50173-6 - INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 6: DISTRIBUTED BUILDING SERVICES |
| BS EN 50173-5 : 2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 5: DATA CENTRES |
| 14/30302089 DC : 0 | BS EN 61000-1-2 ED1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA |
| 07/30170221 DC : DRAFT AUG 2007 | BS EN 50174-1 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: SPECIFICATION AND QUALITY ASSURANCE |
| BS EN 50468:2009 | Resistibility requirements to overvoltages and overcurrents due to lightning for equipment having telecommunication ports |
| I.S. EN 50173-6:2013 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 6: DISTRIBUTED BUILDING SERVICES |
| 07/30171041 DC : DRAFT AUG 2007 | DD IEC/TS 61000-1-2 -ELECTROMAGNETIC COMPATIBILITY -GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA |
| I.S. EN 50700:2014 | INFORMATION TECHNOLOGY - PREMISES DISTRIBUTION ACCESS NETWORK (PDAN) CABLING TO SUPPORT DEPLOYMENT OF OPTICAL BROADBAND NETWORKS |
| I.S. EN 50289-4-14:2003 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-14: ENVIRONMENTAL TEST METHODS - LIGHTNING |
| BS EN 50173-4 : 2007 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
| BS EN 50174-2 : 2009 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
| EN 61000-1-2:2016 | Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
| HD 60364-4-444:2010/AC:2012 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-444: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES |
| IEC 61537:2006 | Cable management - Cable tray systems and cable ladder systems |
| IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
| EN 60794-3-10:2015 | Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly buried or lashed aerial optical telecommunication cables |
| IEC TR 61000-5-3:1999 | Electromagnetic compatibility (EMC) - Part 5-3: Installation and mitigation guidelines - HEMP protection concepts |
| IEC 60364-5-534:1997 | Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Section 534: Devices for protection against overvoltages |
| IEC 60364-5-54:2011 | Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
| IEC 60794-3:2014 | Optical fibre cables - Part 3: Outdoor cables - Sectional specification |
| IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV | Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) |
| EN 50411-2-9:2010 | Fibre organisers and closures to be used in optical fibre communications systems - Product specifications - Part 2-9: Non-sealed closures for air blown fibre microduct cable, for category S & A |
| PREN 50700 : DRAFT 2012 | INFORMATION TECHNOLOGY - PREMISES DISTRIBUTION ACCESS NETWORK (PDAN) CABLING TO SUPPORT DEPLOYMENT OF OPTICAL BROADBAND NETWORKS |
| IEC 61663-1:1999 | Lightning protection - Telecommunication lines - Part 1: Fibre optic installations |
| EN 60794-3-20:2016 | Optical fibre cables - Part 3-20: Outdoor cables - Family specification for self-supporting aerial telecommunication cables |
| EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| EN 60794-3-40:2008 | Optical fibre cables - Part 3-40: Outdoor cables - Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers |
| IEC 60794-3-40:2008 | Optical fibre cables - Part 3-40: Outdoor cables - Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers |
| EN 50174-1:2009/A2:2014 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 1: INSTALLATION SPECIFICATION AND QUALITY ASSURANCE |
| EN 61969-1:2012 | Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines |
| IEC 61969-1:2011 | Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| IEC 60794-3-12:2012 | Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling |
| IEC 60079-17:2013 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
| EN 50411-2-5:2009 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-5: Sealed closures for air blown fibre microduct, type 1, for category S & A |
| EN 60794-3:2015 | Optical fibre cables - Part 3: Sectional specification - Outdoor cables |
| IEC 60794-1-2:2017 | Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance |
| HD 60364-5-54:2011/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS |
| EN 13501-6:2014 | Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on electric cables |
| EN 12613:2009 | Plastics warning devices for underground cables and pipelines with visual characteristics |
| IEC 61663-2:2001 | Lightning protection - Telecommunication lines - Part 2: Lines using metallic conductors |
| IEC 60794-3-10:2015 | Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly buried and lashed aerial optical telecommunication cables |
| EN 60794-3-50:2008 | Optical fibre cables - Part 3-50: Outdoor cables - Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes |
| IEC 60794-3-11:2010 | Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried, and lashed aerial single-mode optical fibre telecommunication cables |
| HD 637 S1:1999/corrigendum:2005 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. |
| EN 60794-3-12:2013 | Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling |
| EN 60794-5-10:2014 | Optical fibre cables - Part 5–10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing |
| EN 61663-2 : 2001 | LIGHTNING PROTECTION - TELECOMMUNICATION LINES - PART 2: LINES USING METALLIC CONDUCTORS |
| EN 60332-1-2:2004/A11:2016 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME (IEC 60332-1-2:2004/A1:2015) |
| IEC 61969-2:2011 | Mechanical structures for electronic equipment - Outdoor enclosures - Part 2: Coordination dimensions |
| EN 50700:2014 | Information technology - Premises distribution access network (PDAN) cabling to support deployment of optical broadband networks |
| EN 50173-3 : 2007 COR 2011 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 3: INDUSTRIAL PREMISES |
| IEC 60332-1-2:2004+AMD1:2015 CSV | Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame |
| EN 61663-1 : 1999 | LIGHTNING PROTECTION - TELECOMMUNICATION LINES - PART 1 - FIBRE OPTIC INSTALLATIONS |
| EN 61386-1:2008 | Conduit systems for cable management - Part 1: General requirements |
| IEC 60601-1-2:2014 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| HD 60364-4-444:2010/AC:2012 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-444: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES |
| EN 50173-1:2011 | Information technology - Generic cabling systems - Part 1: General requirements |
| EN 60601-1-2:2015 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| EN 50085-1 : 2005 AMD 1 2013 | CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| HD 60364-5-534:2016 | Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control - Clause 534: Devices for protection against transient overvoltages |
| IEC 60364-4-444:1996 | Electrical installations of buildings - Part 4: Protection for safety - Section 444: Protection against electromagnetic interferences (EMI) in installations of buildings |
| EN 50174-2 : 2009 AMD 2 2014 | INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS |
| IEC 60794-3-30:2008 | Optical fibre cables - Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lakes, river crossings and coastal application |
| EN 60794-3-11:2010 | Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried and lashed aerial single-mode optical fibre telecommunication cables |
| EN 60794-4-20:2012 | Optical fibre cables - Part 4-20: Aerial optical cables along electrical power lines - Family specification for ADSS (All Dielectric Self Supported) optical cables |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 60794-3-60:2008 | Optical fibre cables - Part 3-60: Outdoor cables - Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes |
| EN 50341-1:2012 | Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications |
| IEC 60794-3-21:2015 | Optical fibre cables - Part 3-21: Outdoor cables - Product specification for optical self-supporting aerial telecommunication cables for use in premises cabling |
| IEC 60794-3-60:2008 | Optical fibre cables - Part 3-60: Outdoor cables - Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes |
| IEC 60794-5-10:2014 | Optical fibre cables - Part 5-10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| EN 124:1994 | Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control |
| EN 61969-2:2012 | Mechanical structures for electronic equipment - Outdoor enclosures - Part 2: Coordination dimensions |
| EN 50411-2-4:2012 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-4: Sealed dome fibre splice closures Type 1, for category S & A |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| EN 61300-3-35:2015 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers |
| EN 60794-5-20:2014 | Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing |
| IEC 60794-5-20:2014 | Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing |
| EN 60794-1-2:2017/AC:2017-07 | OPTICAL FIBRE CABLES - PART 1-2: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL GUIDANCE (IEC 60794-1-2:2017) |
| EN 60794-3-21:2016 | Optical fibre cables - Part 3-21: Outdoor cables - Product specification for optical self-supporting aerial telecommunication cables for use in premises cabling |
| IEC 60794-3-50:2008 | Optical fibre cables - Part 3-50: Outdoor cables - Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes |
| EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
| IEC 60050-826:2004 | International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations |
| EN 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| IEC 61386-1:2008+AMD1:2017 CSV | Conduit systems for cable management - Part 1: General requirements |
| EN 60794-3-30:2008 | Optical fibre cables - Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lakes, river crossings and coastal application |
| EN 60079-17:2014 | Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
| IEC 60794-3-20:2016 | Optical fibre cables - Part 3-20: Outdoor cables - Family specification for self-supporting aerial telecommunication cables |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| EN 60825-2:2004/A2:2010 | SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS) |
| EN 61537:2007 | Cable management - Cable tray systems and cable ladder systems |
| CLC/TR 50173-99-2:2010 | Information technology - Implementation of BCT applications using cabling in accordance with EN 50173-4 |
| EN 50173-5 : 2007 AMD 2 2012 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 5: DATA CENTRES |
| EN 50173-4 : 2007 AMD 2 2012 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES |
| EN 50310:2016 | Telecommunications bonding networks for buildings and other structures |
| EN 50411-2-2:2012 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-2: Sealed pan fibre splice closures Type 1, for category S & A |
| EN 50173-6:2013 | Information technology - Generic cabling systems - Part 6: Distributed building services |
| IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
| EN 50411-2-3:2012 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-3: Sealed inline fibre splice closures Type 1, for category S & A |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.
Are you sure?
Logging out.