EN 50152-3-1:2017
Current
The latest, up-to-date edition.
Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-1: Measurement, control and protection devices for specific use in a.c. traction systems - Devices
10-02-2017
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Specific requirements from the traction system
5 Requirements on measurement, control and
protection devices
Annex A (informative) - Application guide - Measurement
principles
Annex B (informative) - Application guide - Control
principles
Bibliography
This European Standard is applicable to new low voltage devices for measurement, control and protection which are:-for indoor or outdoor fixed installations in traction systems, and-operated in conjunction with high voltage equipment with an a.c. line voltage and frequency as specified in EN 50163.NOTEEN 50163 specifies the a.c. traction systems 15 kV 16,7 Hz and 25 kV 50 Hz.This European Standard also applies to measurement, control and protective devices other than low voltage devices and not covered by a specific railway product standard as far as reasonably possible. Requirements of this document prevail.
| Committee |
CLC/TC 9X
|
| DevelopmentNote |
Supersedes ENV 50152-3-1. (01/2004) Supersedes PREN 50152-3-1. (02/2017)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN 50152-3-1 : 2017 | Identical |
| I.S. EN 50152-3-1:2017 | Identical |
| BS EN 50152-3-1:2017 | Identical |
| CEI EN 50152-3-1 : 2004 | Identical |
| NBN EN 50152 3-1 : 2005 | Identical |
| PN EN 50152-3-1 : 2017 | Identical |
| SN EN 50152-3-1 : 2017 | Identical |
| UNE-EN 50152-3-1:2017 | Identical |
| NF EN 50152-3-1 : 2017 | Identical |
| DIN EN 50152-3-1 : 2017 | Identical |
| VDE 0115-320-3-1 : 2017 | Identical |
| EN 50152-3-3:2016 | Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-3: Measurement, control and protection devices for specific use in a.c. traction systems - Voltage transformers |
| EN 60688:2013 | Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals |
| EN 50152-2:2012 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 2: DISCONNECTORS, EARTHING SWITCHES AND SWITCHES WITH NOMINAL VOLTAGE ABOVE 1 KV |
| IEC 60688:2012 | Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals |
| IEC 60870-2-1:1995 | Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility |
| IEC 61869-1:2007 | Instrument transformers - Part 1: General requirements |
| EN 61869-1:2009 | Instrument transformers - Part 1: General requirements |
| EN 50152-3-2:2016 | Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-2: Measurement, control and protection devices for specific use in a.c. traction systems - Current transformers |
| EN 60255-1:2010 | Measuring relays and protection equipment - Part 1: Common requirements |
| EN 50124-1:2017 | Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment |
| IEC 61243-5:1997 | Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS) |
| IEC 60255-1:1967 | Electrical relays - Part 1: Instantaneous all-or-nothing relays |
| EN 50152-1 : 2012 AMD 1 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 1: CIRCUIT-BREAKERS WITH NOMINAL VOLTAGE ABOVE 1 KV |
| EN 50163 : 2004 COR 2013 | RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS |
| EN 50121-5:2017 | Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
| EN 50388 : 2012 COR 2013 | RAILWAY APPLICATIONS - POWER SUPPLY AND ROLLING STOCK - TECHNICAL CRITERIA FOR THE COORDINATION BETWEEN POWER SUPPLY (SUBSTATION) AND ROLLING STOCK TO ACHIEVE INTEROPERABILITY |
| EN 60870-2-1:1996 | Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility |
| EN 61243-5:2001 | Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS) |
| EN 50633:2016 | Railway applications - Fixed installations - Protection principles for AC and DC electric traction systems |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.