EN 50102:1995/corrigendum Jul. 2002
Current
Current
The latest, up-to-date edition.
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE)
Published date
30-07-2002
Sorry this product is not available in your region.
Introduction
1 Scope
2 Normative references
3 Definitions
3.1 Enclosure
3.2 Degree of protection against mechanical impacts
3.3 IK code
4 Designations
4.1 Arrangement of the IK code
4.2 Characteristic group numerals of the IK code and
their meanings
4.3 Application of the IK code
4.4 Marking
5 General requirements for tests
5.1 Atmospheric conditions for tests
5.2 Enclosures under test
5.3 Specifications to be given in the relevant product
standard
6 Test to verify the protection against mechanical impacts
7 Test apparatus
7.1 Spring hammer
7.2 Pendulum hammer
7.3 Vertical hammer
Annex A (informative) Shapes of striking elements
Deals with the classification of the degrees of protection provided by enclosures against external mechanical impacts when the rated voltage of the protected equipment is not greater than 72,5 kv. Only applies to the enclosures of equipment where the specific standard establishes degrees of protection of the enclosure against mechanical impacts.
| Committee |
SR 70
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| NEN EN 50102 : 1995 AMD 1 1998 | Identical |
| NBN EN 1648-2 : 2012 | Corresponds |
| NBN EN 1648-1 : 2012 | Corresponds |
| PN EN 50102 : 2001 AC 2011 | Identical |
| NF EN 50102 : 95 AMD 1 99 | Identical |
| CEI EN 50102 : 1996 AMD 1 1999 | Identical |
| DIN EN 50102 : 1997 AMD 1 1999 | Identical |
| NBN EN 50102 : 1995 AMD 1 1999 | Similar to |
| NBN EN 1648-1 : 2012 | Identical |
| SN EN 50102 : 1995 AMD 1 1998 | Identical |
| VDE 0470-100 : 97 AMD 1 99 | Identical |
| BS EN 50102 : 95 AMD 14044 | Similar to |
| I.S. EN 50102:1997 | Identical |
| UNE-EN 50102:1996 | Identical |
| UNE-EN 50102 CORR:2002 | Identical |
| BS EN 50133-2-1:2000 | Alarm systems. Access control systems for use in security applications. General requirements for components |
| I.S. HD 384-7-708:2005 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SECTION 708: ELECTRICAL INSTALLATIONS IN CARAVAN PARKS |
| BS EN 50216-3:2002 | Power transformer and reactor fittings Protective relay for hermetically sealed liquid-immersed transformers and reactors without gaseous cushion |
| I.S. EN 1648-2:2018 | LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 2: MOTOR CARAVANS |
| UNI EN 1648-2 : 2012 | LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 2: MOTOR CARAVANS |
| I.S. EN 1648-1:2018 | LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: CARAVANS |
| DIN EN 40-7:2003-06 | LIGHTING COLUMNS - PART 7: REQUIREMENTS FOR FIBRE REINFORCED POLYMER COMPOSITE LIGHTING COLUMNS |
| EN 50216-3 : 2002 AMD 2 2006 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 3: PROTECTIVE RELAY FOR HERMETICALLY SEALED LIQUID-IMMERSED TRANSFORMERS AND REACTORS WITHOUT GASEOUS CUSHION |
| HD 384.7.708 : 2005 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SECTION 708: ELECTRICAL INSTALLATIONS IN CARAVAN PARKS |
| I.S. EN 40-7:2003 | LIGHTING COLUMNS - PART 7: REQUIREMENTS FOR FIBRE REINFORCED POLYMER COMPOSITE LIGHTING COLUMNS |
| HD 638 S1:2001/A1:2006 | ROAD TRAFFIC SIGNAL SYSTEMS |
| EN 40-7:2002 | Lighting columns - Part 7: Requirements for fibre reinforced polymer composite lighting columns |
| BS EN 50556:2011 | Road traffic signal systems |
| 08/30195238 DC : 0 | |
| 02/103833 DC : DRAFT MAY 2002 | PREN 1648-2 - LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 2: MOTOR CARAVANS |
| 17/30354245 DC : 0 | BS EN 1648-1 - LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: CARAVANS |
| 04/30121837 DC : DRAFT SEP 2004 | EN 50085-1 - CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| BS HD 60269-2:2013 | Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to K |
| 07/30160767 DC : 0 | BS EN 13463-1 - NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS |
| 17/30354248 DC : 0 | BS EN 1648-2 - LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 2: MOTOR CARAVANS |
| 09/30202538 DC : DRAFT JUN 2009 | BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| IEC 60269-2:2013+AMD1:2016 CSV | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
| EN 50556:2011 | Road traffic signal systems |
| BS EN 40-7:2002 | Lighting columns Requirements for fibre reinforced polymer composite lighting columns |
| I.S. EN 40-5:2002 | LIGHTING COLUMNS - PART 5: REQUIREMENTS FOR STEEL LIGHTING COLUMNS |
| I.S. EN 40-2:2004 | LIGHTING COLUMNS - PART 2: GENERAL REQUIREMENTS AND DIMENSIONS |
| DIN EN 40-2:2005-02 | Lighting columns - Part 2: General requirements and dimensions; German version EN 40-2:2004 |
| BS 88-2(2013) : 2013 COR 2014 | LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K |
| 03/319909 DC : DRAFT NOV 2003 | BS EN 14817 - RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - AIR-SPRING CONTROL ELEMENTS |
| 10/30217405 DC : 0 | BS EN 50556 - ROAD TRAFFIC SIGNAL SYSTEMS |
| UNE-HD 60269-2:2014 | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
| CEI 32-12 : 2014 | LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K |
| 11/30238996 DC : 0 | BS EN 1648-1 - LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: CARAVANS |
| BS EN 50298:1999 | Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements |
| DIN EN 50133-2-1 : 2001 | ALARM SYSTEMS - ACCESS CONTROL SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 2-1: GENERAL REQUIREMENTS FOR COMPONENTS |
| NF EN 50133-2-1 : 2001 | ALARM SYSTEMS - ACCESS CONTROL SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 2-1: GENERAL REQUIREMENTS FOR COMPONENTS |
| NF EN 50556 : 2011 | ROAD TRAFFIC SIGNAL SYSTEMS |
| PREN 1648-2 : DRAFT 2017 | LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 2: MOTOR CARAVANS |
| BS EN 14817:2006 | Railway applications. Suspension components. Air-spring control elements |
| BS EN 40-6:2002 | Lighting columns Requirements for aluminium lighting columns |
| EN 50298:1998 | Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements |
| UNI EN 40-5 : 2003 | LIGHTING COLUMNS - REQUIREMENTS FOR STEEL LIGHTING COLUMNS |
| 11/30238993 DC : 0 | BS EN 1648-2 - LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 2: MOTOR CARAVANS |
| CEI EN 50133-2-1 : 2001 | ALARM SYSTEMS ACCESS CONTROL SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 2-1: GENERAL REQUIREMENTS FOR COMPONENTS |
| 02/103832 DC : DRAFT MAY 2002 | PREN 1648-1 - LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: CARAVANS |
| I.S. EN 50133-2-1:2001 | ALARM SYSTEMS - ACCESS CONTROL SYSTEMS FOR USE IN SECURITY APPLICATIONS - GENERAL REQUIREMENTS FOR COMPONENTS |
| 99/715383 DC : DRAFT OCT 1999 | BS EN 50131-4 - ALARM SYSTEMS - INTRUSION SYSTEMS - PART 4: WARNING DEVICES |
| 03/320797 DC : 0 | IEC 62109-1 ED.1 - SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| PREN 1648-1 : DRAFT 2017 | LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: CARAVANS |
| UNI EN 1648-1 : 2012 | LEISURE ACCOMMODATION VEHICLES - 12 V DIRECT CURRENT EXTRA LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: CARAVANS |
| CEI EN 50556 : 2012 | ROAD TRAFFIC SIGNAL SYSTEMS |
| BS EN 40-5:2002 | Lighting columns Requirements for steel lighting columns |
| BS EN 40-2:2004 | Lighting columns General requirements and dimensions |
| EN 14817:2006 | Railway applications - Suspension components - Air spring control elements |
| EN 40-2:2004 | Lighting columns - Part 2: General requirements and dimensions |
| EN 40-5:2002 | Lighting columns - Part 5: Requirements for steel lighting columns |
| EN 40-6:2002 | Lighting columns - Part 6: Requirements for aluminium lighting columns |
| EN 1648-1:2018 | Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1: Caravans |
| EN 1648-2:2018 | Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 2: Motor caravans |
| VDE 0830-8-2-1 : 2001 | ALARM SYSTEMS - ACCESS CONTROL SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 2-1: GENERAL REQUIREMENTS FOR COMPONENTS |
| 07/30172833 DC : DRAFT DEC 2007 | BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED - EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| DIN EN 50298 : 1999 | EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS |
| UNE-EN 50556:2011 | Road traffic signal systems |
| I.S. EN 50556:2011 | ROAD TRAFFIC SIGNAL SYSTEMS |
| BS 7987(2001) : 2001 | ROAD TRAFFIC SIGNAL SYSTEMS |
| PREN 50556 : DRAFT 2010 | ROAD TRAFFIC SIGNAL SYSTEMS |
| 01/203790 DC : DRAFT JUNE 2001 | IEC 62093 ED.1 - BALANCE-OF-SYSTEM COMPONENTS FOR PHOTO-VOLTAIC SYSTEMS - DESIGN QUALIFICATION AND TYPE APPROVAL |
| I.S. EN 50216-3:2002 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 3: PROTECTIVE RELAY FOR HERMETICALLY SEALED LIQUID-IMMERSED TRANSFORMERS AND REACTORS WITHOUT GASEOUS CUSHION |
| I.S. HD 60269-2:2013 | LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K (IEC 60269-2:2013 (MOD)) |
| DIN EN 14817:2006-08 | Railway applications - Suspension components - Air spring control elements |
| EN 50133-2-1:2000 | Alarm systems - Access control systems for use in security applications - Part 2-1: General requirements for components |
| HD 60269-2:2013 | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
| EN 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-63:1991 | Environmental testing - Part 2: Test methods - Test Eg: Impact, spring hammer. |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| ISO 1052:1982 | Steels for general engineering purposes |
| ISO 2039-2:1987 | Plastics Determination of hardness Part 2: Rockwell hardness |
| HD 323.1 : 200S2 | BASIC ENVIRONMENTAL TESTING PROCEDURES - GENERAL AND GUIDANCE |
| IEC 60050-826:2004 | International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations |
| IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| EN 60068-2-62 : 1995 | ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST EF: IMPACT, PENDULUM METHOD |
| EN 60068-2-63 : 1994 | ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST EG: IMPACT, SPRING HAMMER |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.