EN 4687:2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application
Superseded date
23-01-2021
Superseded by
Published date
21-03-2012
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Surface pretreatments
5 Classification
6 Batch release and qualification testing
7 Requirements for fibre reinforced composites
8 Designation
This European Standard defines the requirements for a two components, chromate and lead free epoxy, noncorrosion inhibiting primer.The coating shall be suitable for use on fibre reinforced composite materials, titanium and corrosion resistantsteels and other suitably prepared corrosion resistant substrates.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 4687. (04/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE-EN 4687:2012 | Identical |
| NBN EN 4687 : 2012 | Identical |
| UNI EN 4687 : 2013 | Identical |
| NS EN 4687 : 2012 | Identical |
| PN EN 4687 : 2012 | Identical |
| I.S. EN 4687:2012 | Identical |
| BS EN 4687:2012 | Identical |
| NEN EN 4687 : 2012 | Identical |
| NF EN 4687 : 2012 | Identical |
| SN EN 4687 : 2012 | Identical |
| DIN EN 4687:2012-06 | Identical |
| ONORM EN 4687 : 2012 | Identical |
| 17/30371344 DC : 0 | BS EN 4689 - AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| PREN 4476 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| UNI EN 4689 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| BS EN 4689:2012 | Aerospace series. Paints and varnishes. Two components cold curing polyurethane finish. High flexibility and chemical agent resistance for military application |
| UNI EN 4688 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| EN 4689:2012 | Aerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application |
| EN 4688:2012 | Aerospace series - Paints and varnishes - Corrosion inhibiting two components cold curing primer for military application |
| I.S. EN 4689:2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| I.S. EN 4688:2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| BS EN 4688:2012 | Aerospace series. Paints and varnishes. Corrosion inhibiting two components cold curing primer for military application |
| ISO 7724-1:1984 | Paints and varnishes Colorimetry Part 1: Principles |
| ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
| EN 2334:1997 | Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys |
| EN ISO 4628-2:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
| MIL-PRF-6081 Revision E:2014 | Lubricating Oil, Jet Engine |
| ISO 2812-2:2007 | Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method |
| PREN 3847 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SEDIMENTATION RATING |
| EN ISO 2431:2011 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
| ISO 2811-3:2011 | Paints and varnishes — Determination of density — Part 3: Oscillation method |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| ISO 6270-1:1998 | Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| EN ISO 1524:2013 | Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2013) |
| EN ISO 11890-2:2013 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013) |
| SAE AMS 1527 : 2014 | CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, FOAM-ON, PRESSURE-SPRAYING |
| ISO 1520:2006 | Paints and varnishes Cupping test |
| EN ISO 2811-2:2011 | Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
| ISO 7724-2:1984 | Paints and varnishes Colorimetry Part 2: Colour measurement |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN 4688:2012 | Aerospace series - Paints and varnishes - Corrosion inhibiting two components cold curing primer for military application |
| DEFSTAN 68-10/5(2003) : 2003 | CORROSION PREVENTIVE: WATER DISPLACING NATO CODE: C-634 JOINT SERVICE DESIGNATION: PX-24 |
| EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
| EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
| ISO 3678:1976 | Paints and varnishes — Print-free test |
| EN ISO 9514:2005 | Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005) |
| EN 4689:2012 | Aerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application |
| EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
| EN 2437:2001 | Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys |
| EN ISO 2811-3:2011 | Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011) |
| ISO 3679:2015 | Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
| EN ISO 1513:2010 | Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
| ISO 7724-3:1984 | Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| ISO 11890-1:2007 | Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
| EN ISO 3680:2004 | Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004) |
| EN ISO 9117-1:2009 | Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009) |
| ISO 2811-2:2011 | Paints and varnishes Determination of density Part 2: Immersed body (plummet) method |
| ISO 9117-3:2010 | Paints and varnishes — Drying tests — Part 3: Surface-drying test using ballotini |
| PREN 4160 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - PAINTS AND VARNISHES - TEST METHODS - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE |
| EN 2101:1991 | Aerospace series - Chromic acid anodizing of aluminium and wrought aluminium alloys |
| PREN 3837 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - NATURE AND METHOD FOR SURFACE PREPARATION OF TEST PIECES IN ALUMINIUM ALLOYS |
| MIL-DTL-83133 Revision J:2015 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
| ISO 1518:1992 | Paints and varnishes Scratch test |
| EN ISO 2811-4:2011 | Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011) |
| EN ISO 1520:2006 | Paints and varnishes - Cupping test (ISO 1520:2006) |
| EN ISO 11890-1:2007 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
| ISO 2812-1:2017 | Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
| ISO 2811-4:2011 | Paints and varnishes Determination of density Part 4: Pressure cup method |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| ISO 1519:2011 | Paints and varnishes Bend test (cylindrical mandrel) |
| ISO 3680:2004 | Determination of flash/no flash Rapid equilibrium closed cup method |
| ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
| EN ISO 1519:2011 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
| EN ISO 3679:2015 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| SAE AMS1533B | Cleaner for Exterior Aircraft Surfaces Gel-Type, Solvent-Base |
| EN ISO 1518:2000 | Paints and varnishes - Scratch test (ISO 1518:1992) |
| ISO 1524:2013 | Paints, varnishes and printing inks Determination of fineness of grind |
| ISO 9117-1:2009 | Paints and varnishes — Drying tests — Part 1: Determination of through-dry state and through-dry time |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| ISO 11890-2:2013 | Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method |
| ISO 9514:2005 | Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing |
| EN ISO 3678:1995 | Paints and varnishes - Print-free test (ISO 3678:1976) |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
| EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
| ISO 2813:2014 | Paints and varnishes — Determination of gloss value at 20°, 60° and 85° |
| EN ISO 2813:2014 | Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
| EN ISO 9117-3:2010 | Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010) |
| ISO 2431:2011 | Paints and varnishes Determination of flow time by use of flow cups |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.