EN 302 326-3 : 1.3.1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FIXED RADIO SYSTEMS; MULTIPOINT EQUIPMENT AND ANTENNAS; PART 3: HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE FOR MULTIPOINT RADIO ANTENNAS
Hardcopy , PDF
04-09-2021
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Intellectual Property Rights
Foreword
0 Introduction
0.1 General
0.2 Relationship with the R&TTE essentials requirements
1 Scope
1.1 General
1.2 Frequency ranges
1.3 Profiles
2 References
2.1 Normative references
2.2 Informative references
3 Definitions, symbols and abbreviations
3.1 Definitions
3.2 Symbols
3.3 Abbreviations
4 Technical requirements specifications
4.1 Classification of antennas
4.2 Phenomena description
4.3 Environmental specifications and test
4.4 Radiation Pattern Envelope (RPE) requirements
4.5 Antenna gain requirements
5 Testing for conformance with technical requirements
5.2 Wide radio-frequency band covering antennas specification
and test
5.3 Environmental conditions for Testing
5.4 Radiation Pattern Envelope (RPE)
5.5 Antenna gain
Annex A (normative): HS Requirements and conformance Test
specifications Table (HS-RTT)
Annex B (informative): Antenna profiles
B.1 General
B.2 Directional antennas
B.3 Sectorial and omnidirectional antennas
Annex C (informative): The EN title in the official languages
Annex D (informative): Bibliography
History
Applies to the essential requirements of antennas (including those in equipment with integral antennas) used in Multipoint (MP) Digital Fixed Radio Systems (DFRS) intended for use in the frequency bands identified in EN 302 326-1.
| Committee |
ATTM TM4
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
European Telecommunications Standards Institute
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| OVE/ONORM EN 302326-3 : 1.3.1 | Identical |
| NEN EN 302326-3 : 2008 | Identical |
| NBN EN 302 326-3 : 2008 | Identical |
| NF EN 302326-3 : 2009 | Identical |
| PN EN 302 326-3 : 2008 | Identical |
| DIN EN 302326-3:2008-06 | Identical |
| NF EN 302326-2 : 2011 | FIXED RADIO SYSTEMS - MULTIPOINT EQUIPMENT AND ANTENNAS - PART 2: HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE FOR DIGITAL MULTIPOINT RADIO EQUIPMENT |
| TR 102 748 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); IMPACT OF THE TREND TOWARDS FLEXIBILITY IN SPECTRUM USAGE ON THE PRINCIPLES FOR DRAFTING HARMONIZED STANDARDS AND THE ETSI WORK PROGRAMME FOR HARMONIZED STANDARDS |
| TR 102 914 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ASPECTS AND IMPLICATIONS OF THE INCLUSION OF RECEIVER PARAMETERS WITHIN ETSI STANDARDS |
| TR 101 506 : 1.3.1 | FIXED RADIO SYSTEMS; GENERIC DEFINITIONS, TERMINOLOGY AND APPLICABILITY OF ESSENTIAL REQUIREMENTS COVERING ARTICLE 3.2 OF DIRECTIVE 2014/53/EU TO FIXED RADIO SYSTEMS |
| EN 302 326-2 : 1.2.2 | FIXED RADIO SYSTEMS; MULTIPOINT EQUIPMENT AND ANTENNAS; PART 2: HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE FOR DIGITAL MULTIPOINT RADIO EQUIPMENT |
| TR 102 453-1 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); CONVERGED FIXED-NOMADIC BROADBAND WIRELESS ACCESS (BWA); PART 1: FREQUENCIES ABOVE 3,4 GHZ - SYSTEM REFERENCE DOCUMENT |
| EN 301 126-3-2 : 1.2.1 | FIXED RADIO SYSTEMS; CONFORMANCE TESTING; PART 3-2: POINT-TO-MULTIPOINT ANTENNAS - DEFINITIONS, GENERAL REQUIREMENTS AND TEST PROCEDURES |
| EN 301 525 : 1.1.1 | FIXED RADIO SYSTEMS; POINT TO MULTIPOINT ANTENNAS; ANTENNAS FOR POINT-TO-MULTIPOINT FIXED RADIO SYSTEMS IN THE 1 GHZ TO 3 GHZ BAND |
| EN 301 215-4 : 1.1.1 | FIXED RADIO SYSTEMS; POINT-TO-MULTIPOINT ANTENNAS; ANTENNAS FOR MULTIPOINT FIXED RADIO SYSTEMS IN THE 11 GHZ TO 60 GHZ BAND; PART 4: 30 GHZ TO 40,5 GHZ |
| 1989/336/EEC : 1989 | COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY |
| EN 302 326-2 : 1.2.2 | FIXED RADIO SYSTEMS; MULTIPOINT EQUIPMENT AND ANTENNAS; PART 2: HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE FOR DIGITAL MULTIPOINT RADIO EQUIPMENT |
| EN 301 997-2 : 1.1.1 | TRANSMISSION AND MULTIPLEXING (TM); MULTIPOINT EQUIPMENT; RADIO EQUIPMENT FOR USE IN MULTIMEDIA WIRELESS SYSTEMS (MWS) IN THE FREQUENCY BAND 40,5 GHZ TO 43,5 GHZ; PART 2: HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS UNDER ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
| EN 301 753 : 1.2.1 | FIXED RADIO SYSTEMS; MULTIPOINT EQUIPMENT AND ANTENNAS; GENERIC HARMONIZED STANDARD FOR MULTIPOINT DIGITAL FIXED RADIO SYSTEMS AND ANTENNAS COVERING THE ESSENTIAL REQUIREMENTS UNDER ARTICLE 3.2 OF THE DIRECTIVE 1999/5/EC |
| EN 301 215-1 : 1.2.1 | FIXED RADIO SYSTEMS; POINT TO MULTIPOINT ANTENNAS; ANTENNAS FOR POINT-TO-MULTIPOINT FIXED RADIO SYSTEMS IN THE 11 GHZ TO 60 GHZ BAND; PART 1: GENERAL ASPECTS |
| 1973/23/EEC : 1973 | COUNCIL DIRECTIVE OF 19 FEBRUARY 1973 ON THE HARMONIZATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS |
| EN 302 217-4-1 : 1.4.1 | FIXED RADIO SYSTEMS; CHARACTERISTICS AND REQUIREMENTS FOR POINT-TO-POINT EQUIPMENT AND ANTENNAS; PART 4-1: SYSTEM-DEPENDENT REQUIREMENTS FOR ANTENNAS |
| EG 201 399 : 3.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); A GUIDE TO THE PRODUCTION OF HARMONIZED STANDARDS FOR APPLICATION UNDER THE RADIO & TELECOMMUNICATION TERMINAL EQUIPMENT DIRECTIVE 1999/5/EC (R&TTE) AND A FIRST GUIDE ON THE IMPACT OF THE RADIO EQUIPMENT DIRECTIVE 2014/53/EU (RED) ON HARMONIZED STANDARDS |
| EN 302 326-1 : 1.2.2 | FIXED RADIO SYSTEMS; MULTIPOINT EQUIPMENT AND ANTENNAS; PART 1: OVERVIEW AND REQUIREMENTS FOR DIGITAL MULTIPOINT RADIO SYSTEMS |
| TR 101 506 : 1.3.1 | FIXED RADIO SYSTEMS; GENERIC DEFINITIONS, TERMINOLOGY AND APPLICABILITY OF ESSENTIAL REQUIREMENTS COVERING ARTICLE 3.2 OF DIRECTIVE 2014/53/EU TO FIXED RADIO SYSTEMS |
| EN 301 215-3 : 1.1.1 | FIXED RADIO SYSTEMS; POINT-TO-MULTIPOINT ANTENNAS; ANTENNAS FOR POINT-TO-MULTIPOINT FIXED RADIO SYSTEMS IN THE 11 GHZ TO 60 GHZ BAND; PART 3: MULTIPOINT MULTIMEDIA WIRELESS SYSTEM IN 40,5 GHZ TO 43,5 GHZ |
| 119999/5/EC : 1999 | DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 MARCH 1999 ON RADIO EQUIPMENT AND TELECOMMUNICATIONS TERMINAL EQUIPMENT AND THE MUTUAL RECOGNITION OF THEIR CONFORMITY |
| EN 302 217-4-2 : 1.5.1 | FIXED RADIO SYSTEMS; CHARACTERISTICS AND REQUIREMENTS FOR POINT-TO-POINT EQUIPMENT AND ANTENNAS; PART 4-2: ANTENNAS; HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
| EN 301 215-2 : 1.3.1 | FIXED RADIO SYSTEMS; POINT TO MULTIPOINT ANTENNAS; ANTENNAS FOR POINT-TO-MULTIPOINT FIXED RADIO SYSTEMS IN THE 11 GHZ TO 60 GHZ BAND; PART 2: 24 GHZ TO 30 GHZ |
| EN 301 489-4 : 2.2.1 | ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 4: SPECIFIC CONDITIONS FOR FIXED RADIO LINKS AND ANCILLARY EQUIPMENT; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU |
| EN 302 078 : 1.1.1 | FIXED RADIO SYSTEMS; MULTIPOINT ANTENNAS; CIRCULARLY POLARIZED ANTENNAS FOR MULTIPOINT FIXED RADIO SYSTEMS IN THE 1 GHZ TO 11 GHZ BAND |
| EN 302 085 : 1.2.3 | FIXED RADIO SYSTEMS; POINT-TO-MULTIPOINT ANTENNAS; ANTENNAS FOR POINT-TO-MULTIPOINT FIXED RADIO SYSTEMS IN THE 3 GHZ TO 11 GHZ BAND |
| EN 301 489-1 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 1: COMMON TECHNICAL REQUIREMENTS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU AND THE ESSENTIAL REQUIREMENTS OF ARTICLE 6 OF DIRECTIVE 2014/30/EU |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.