EN 301 213-1 : 1.1.2
Current
The latest, up-to-date edition.
FIXED RADIO SYSTEMS; POINT-TO-MULTIPOINT EQUIPMENT; POINT-TO-MULTIPOINT DIGITAL RADIO SYSTEMS IN FREQUENCY BANDS IN THE RANGE 24,25 GHZ TO 29,5 GHZ USING DIFFERENT ACCESS METHODS; PART 1: BASIC PARAMETERS
Hardcopy , PDF
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Intellectual Property Rights
Foreword
Introduction
1 Scope
2 References
3 Definitions, symbols and abbreviations
3.1 Definitions
3.2 Symbols
3.3 Abbreviations
4 General characteristics
4.1 General system architecture
4.2 Frequency bands and channel arrangements
4.2.1 Channel plan
4.2.2 Channel arrangements
4.3 Compatibility requirements
4.4 Environmental conditions
4.4.1 Equipment within weather protected locations (indoor
locations)
4.4.2 Equipment for non-weather protected locations (outdoor
locations)
4.5 Power supply
4.6 Electromagnetic compatibility conditions
4.7 TMN interfaces
4.8 Synchronization of interface bit rates
4.9 Branching/feeder/antenna requirements
4.9.1 Wave guide flanges
4.9.2 Return loss
4.9.3 Intermodulation products
5 System parameters
5.1 System capacity
5.2 Round trip delay
5.3 Transparency
5.4 Voice coding methods
5.5 Transmitter characteristics
5.5.1 Transmitter output power
5.5.2 Transmitter nominal output power
5.5.3 Transmit power and frequency control
5.5.3.1 Automatic Transmit Power Control (ATPC)
5.5.3.2 Remote Transmit Power Control (RTPC)
5.5.3.3 Remote Frequency Control (RFC)
5.5.4 RF spectrum mask
5.5.5 Tx Local Oscillator frequency arrangements
5.5.6 Spurious emissions (external)
5.5.7 Radio frequency tolerance
5.6 Receiver characteristics
5.6.1 Rx Local Oscillator frequency arrangements
5.6.2 Spurious emissions
5.6.3 Receiver IF
5.7 System performance
5.7.1 Dynamic level range
5.7.2 BER as a function of Receiver input Signal Level (RSL)
5.7.3 Equipment Background BER
5.7.4 Interference sensitivity
5.7.4.1 Co-channel interference sensitivity (external)
5.7.4.2 Adjacent channel interference
5.7.4.3 Continuous Wave (CW) interference
5.7.5 Distortion sensitivity
6 Types of interfaces at the subscriber equipment and the network
exchange
Annex A (informative): Bibliography
History
Describes the minimum requirements for system parameters of Point-to-Multipoint (P-MP) Radio and Multipoint-to-Multipoint (MP-MP) Systems in the terrestrial Fixed Services (FS) operating in the bands 24,5 GHz to 29,5 GHz.
| Committee |
TM 4
|
| DocumentType |
Standard
|
| Pages |
23
|
| PublisherName |
European Telecommunications Standards Institute
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 301213-1:2003-09 | Identical |
| NBN EN 301 213-1 : 2002 | Identical |
| NEN EN 301213-1 : 2002 | Identical |
| PN EN 301 213-1 : 2005 | Identical |
| TS 101 999 : 1.1.1 | BROADBAND RADIO ACCESS NETWORKS (BRAN); HIPERACCESS; PHY PROTOCOL SPECIFICATION |
| NF EN 301215-2 : 2002 | FIXED RADIO SYSTEMS - POINT TO MULTIPOINT ANTENNAS - ANTENNAS FOR POINT-TO-MULTIPOINT FIXED RADIO SYSTEMS IN THE 11 GHZ TO 60 GHZ BAND - PART 2: 24 GHZ TO 30 GHZ |
| TR 101 904 : 1.1.1 | TRANSMISSION AND MULTIPLEXING (TM); TIME DIVISION DUPLEX (TDD) IN POINT-TO-MULTIPOINT (P-MP) FIXED WIRELESS ACCESS (FWA) SYSTEMS; CHARACTERISTICS AND NETWORK APPLICATIONS |
| TR 101 689-3 : 1.1.1 | TRANSMISSION AND MULTIPLEXING (TM) - TERMS AND DEFINITIONS IN TRANSPORT NETWORKS - PART 3: FIXED RADIO SYSTEMS |
| NF EN 301997-1 : 2002 | TRANSMISSION AND MULTIPLEXING (TM) - MULTIPOINT EQUIPMENT - RADIO EQUIPMENT FOR USE IN MULTIMEDIA WIRELESS SYSTEMS (MWS) IN THE FREQUENCY BAND 40,5 GHZ TO 43,5 GHZ - PART 1: GENERAL REQUIREMENTS |
| TR 101 939 : 1.1.1 | FIXED RADIO SYSTEMS; MULTIPOINT-TO-MULTIPOINT SYSTEMS; REQUIREMENTS FOR BROADBAND MULTIPOINT-TO-MULTIPOINT RADIO SYSTEMS OPERATING IN THE 24,25 GHZ TO 29,5 GHZ BAND AND IN THE AVAILABLE BANDS WITHIN THE 31,0 GHZ TO 33,4 GHZ FREQUENCY RANGE |
| NF EN 301997-2 : 2004 | TRANSMISSION AND MULTIPLEXING (TM) - MULTIPOINT EQUIPMENT - RADIO EQUIPMENT FOR USE IN MULTIMEDIA WIRELESS SYSTEMS (MWS) IN THE FREQUENCY BAND 40,5 GHZ TO 43,5 GHZ - PART 2: HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS UNDER ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
| TS 102 123 : 1.2.1 | BROADBAND RADIO ACCESS NETWORKS (BRAN); HIPERACCESS; RADIO CONFORMANCE TEST SPECIFICATION |
| TR 102 271 : 1.1.1 | BROADBAND RADIO ACCESS NETWORKS (BRAN); HIPERACCESS; RECOMMENDATIONS ON ESSENTIAL RADIO PARAMETERS TO BE INCLUDED IN EN 302 326 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.