EN 295-1:2013
Current
The latest, up-to-date edition.
Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints
06-02-2013
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Requirements for pipes and fittings
6 Requirements for joints and joint assemblies
7 Common requirements for pipes, fittings and joints
8 Designation
9 Marking
10 Evaluation of conformity
Annex A (normative) - Requirements for vitrified
clay fittings
Annex B (informative) - Guidance on design,
installation and operation of sewers
and drains constructed from vitrified clay pipes
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions
of the EU Construction Products Directive
Bibliography
This European Standard specifies requirements for vitrified clay pipes, fittings and flexible joints for buried drain and sewer systems for the conveyance of wastewater (including domestic wastewater, surface water and rainwater) under gravity and periodic hydraulic surcharge or under continuous low head of pressure.This standard also specifies requirements for rubber, polyurethane and polypropylene materials and other components used for jointing clay pipes and fittings. This standard specifies different strength classes, systems of joint dimensions, lengths and fittings. NOTE 1The specifiers/purchasers can select them according to their requirements. This standard does not apply to special fittings, adaptors and compatible accessories, perforated pipes and fittings, manholes and inspection chambers and pipes and joints for pipe jacking, which are specified in other parts of the standard series EN 295.NOTE 2Corresponding provisions for the evaluation of conformity (ITT and FPC) and sampling and those for the test methods are further specified in EN 295-2 and EN 295-3, respectively.
Committee |
CEN/TC 165
|
DevelopmentNote |
Supersedes NFP 16 321. (04/2002) Supersedes NS 3009 (07/2004) Together with EN 295-2, EN 295-4, EN 295-5, EN 295-6 and EN 295-7 it supersedes EN 295-10. Supersedes PREN 295-1. (02/2013)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
SN EN 295-1 : 2013 | Identical |
UNI EN 295-1 : 2013 | Identical |
UNE-EN 295-1:2013 | Identical |
NEN EN 295-1 : 2013 | Identical |
NBN EN 295-1 : 2013 | Identical |
NBN EN 295-5 : 2013 | Identical |
BS EN 295-1:2013 | Identical |
NBN EN 295-6 : 2013 | Identical |
I.S. EN 295-1:2013 | Identical |
PN EN 295-1 : 2013 | Identical |
NF EN 295-1 : 2013 | Identical |
NS EN 295-1 : 2013 | Identical |
DIN EN 295-1:2013-05 | Identical |
DIN EN 295-5:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 5: REQUIREMENTS FOR PERFORATED PIPES AND FITTINGS |
05/30137614 DC : 0 | ISO 18672-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE DRAINAGE AND SEWERAGE - POLYESTER RESIN CONCRETE (PRC) - PART 1: PIPES AND FITTINGS WITH FLEXIBLE JOINTS |
CEN/TR 14920:2005 | Jetting resistance of drain and sewer pipes - Moving jet test method |
I.S. EN 16397-2:2014 | FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES |
UNE-EN 16397-2:2015 | Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes |
BS EN 295-3:2012 | Vitrified clay pipe systems for drains and sewers Test methods |
BS EN 295-7:2013 | Vitrified clay pipe systems for drains and sewers Requirements for pipes and joints for pipe jacking |
CEN/TR 16626:2014 | Vitrified clay pipe systems for drains and sewers - Guidance for voluntary third-party certification procedures |
BS EN 16397-2:2014 | Flexible couplings Characteristics and testing for metal banded flexible couplings, adaptors and bushes |
PD CEN/TR 16626:2014 | Vitrified clay pipe systems for drains and sewers. Guidance for voluntary third-party certification procedures |
PD CEN/TR 14920:2005 | Jetting resistance of drain and sewer pipes. Moving jet test method |
01/105983 DC : DRAFT JULY 2001 | PREN 295-10 - VITRIFIED CLAY PIPES AND FITTINGS AND PIPE JOINTS FOR DRAINS AND SEWERS - PART 10: MANDATED REQUIREMENTS |
BS EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers Requirements for adaptors, connectors and flexible couplings |
BS EN 295-2:2013 | Vitrified clay pipe systems for drains and sewers Evaluation of conformity and sampling |
I.S. EN 295-6:2013 | VITRIFIED CLAY PIPES SYSTEMS FOR DRAIN AND SEWERS - PART 6: REQUIREMENTS FOR COMPONENTS OF MANHOLES AND INSPECTION CHAMBERS |
I.S. EN 295-2:2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
I.S. EN 295-3:2012 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 3: TEST METHODS |
I.S. EN 295-7:2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING |
I.S. EN 295-5:2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 5: REQUIREMENTS FOR PERFORATED PIPES AND FITTINGS |
I.S. EN 295-4:2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
06/30158977 DC : 0 | BS EN 1124-3 - PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 3: SYSTEM X - DIMENSIONS |
UNI EN 16397-2 : 2014 | FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES |
DIN EN 295-2:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING |
DIN EN 295-4:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
DIN EN 295-7:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING |
BS EN 295-10:2005 | Vitrified clay pipes and fittings and pipe joints for drains and sewers Performance requirements |
UNI EN 295-3 : 2012 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 3: TEST METHODS |
UNI EN 295-4 : 2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
DIN EN 16397-2:2015-01 | FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES |
I.S. EN 295-10:2005 | VITRIFIED CLAY PIPES AND FITTINGS AND PIPE JOINTS FOR DRAINS AND SEWERS - PART 10: PERFORMANCE REQUIREMENTS |
PREN 295-7 : DRAFT 2010 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING |
10/30217002 DC : 0 | BS EN 295-7 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 7: REQUIREMENTS FOR PIPES AND JOINTS FOR PIPE JACKING |
I.S. CEN TR 14920:2005 | JETTING RESISTANCE OF DRAIN AND SEWER PIPES - MOVING JET TEST METHOD |
DIN EN 295-6:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 6: REQUIREMENTS FOR COMPONENTS OF MANHOLES AND INSPECTION CHAMBERS |
BS EN 295-5:2013 | Vitrified clay pipe systems for drains and sewers Requirements for perforated pipes and fittings |
UNE-EN 295-2:2013 | Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling |
BS EN 12056-2:2000 | Gravity drainage systems inside buildings Sanitary pipework, layout and calculation |
UNE-EN 295-7:2013 | Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking |
UNE-EN 295-5:2013 | Vitrified clay pipe systems for drains and sewers - Part 5: Requirements for perforated pipes and fittings |
UNE-EN 295-6:2013 | Vitrified clay pipes systems for drain and sewers - Part 6: Requirements for components of manholes and inspection chambers |
EN 295-3:2012 | Vitrified clay pipe systems for drains and sewers - Part 3: Test methods |
EN 295-7:2013 | Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking |
EN 295-6:2013 | Vitrified clay pipes systems for drain and sewers - Part 6: Requirements for components of manholes and inspection chambers |
EN 16397-2:2014 | Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes |
EN 295-5:2013 | Vitrified clay pipe systems for drains and sewers - Part 5: Requirements for perforated pipes and fittings |
EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings |
EN 295-2:2013 | Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling |
S.R. CEN/TR 16626:2014 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - GUIDANCE FOR VOLUNTARY THIRD-PARTY CERTIFICATION PROCEDURES |
UNE-EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings |
BS EN 295-6:2013 | Vitrified clay pipes systems for drain and sewers Requirements for components of manholes and inspection chambers |
DIN EN 295-10:2005-05 | VITRIFIED CLAY PIPES AND FITTINGS AND PIPE JOINTS FOR DRAINS AND SEWERS - PART 10: PERFORMANCE REQUIREMENTS |
93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
EN 295-3:2012 | Vitrified clay pipe systems for drains and sewers - Part 3: Test methods |
EN 1295-1:1997 | Structural design of buried pipelines under various conditions of loading - Part 1: General requirements |
EN 12056-2:2000 | Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation |
89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
EN 12056-1:2000 | Gravity drainage systems inside buildings - Part 1: General and performance requirements |
EN 295-2:2013 | Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling |
EN 12889:2000 | Trenchless construction and testing of drains and sewers |
EN 752:2017 | Drain and sewer systems outside buildings - Sewer system management |
EN 1610:2015 | Construction and testing of drains and sewers |
EN 12056-3:2000 | Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.