Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 2084:2015

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Aerospace series - Cables, electrical, general purpose, with conductors in copper or copper alloy - Technical specification

Superseded date

28-02-2019

Superseded by

EN 2084:2018

Published date

09-09-2015

Sorry this product is not available in your region.

European foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Materials and construction of cables
5 Required characteristics
6 Tests methods
7 Quality assurance
8 Identification marking
9 Packaging, labelling and delivery lengths

This standard specifies the characteristics, test methods, qualification and acceptance conditions of single and multicore electric cables, without jackets, for general purpose with conductors in copper or copper alloy, intended for installation in aircraft circuits.The insulation of these cables is designed to withstand aircraft voltages at a frequency not exceeding 2 000 Hz. Unless specified by individual product standards the maximum demonstrated ac voltage of rating of these cables is 115 V rms phase to neutral and 200 V rms phase to phase.They are divided into types, the characteristics of which are given in the product standards. Unless otherwise specified in the product standard, the tests defined in this standard apply.

Committee
ASD-STAN
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

Standards Relationship
UNI EN 2084:2016 Identical
UNI EN 2084 : 2018 Identical
NBN EN 2084 : 2015 Identical
ÖNORM EN 2084:2018 10 01 Identical
I.S. EN 2084:2018 Identical
NS EN 2084 : 2005 Identical
I.S. EN 2084:2015 Identical
NEN EN 2084 : 2018 Identical
UNI EN 2084 : 2007 Identical
NEN EN 2084 : 2015 Identical
PN-EN 2084: 2018 Identical
ONORM EN 2084 : 2016 Identical
NF EN 2084 : 2015 Identical
PN EN 2084 : 2016 Identical
DIN EN 2084:2015-12 Identical
BS EN 2084:2015 Identical
BS EN 2084:2018 Identical
SN EN 2084 : 2006 Identical
UNE-EN 2084:2015 Identical
13/30281821 DC : 0 Identical

BS EN 4611-007:2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family Nickel plated copper. Operating temperatures, between -65°C and 150°C. Dual extruded wall for open applications. UV laser printable. Product standard
UNI EN 4611-002 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 002: GENERAL
ONORM EN 2591-100 : 2006 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 100: GENERAL
BS EN 4611-009:2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family BJ. Nickel plated copper. Operating temperatures, between -65°C and 150°C. Single extruded wall for use as cable cores or within equipment in areas of high vibration, cable flexing and fluid contamination. UV laser printable. Product standard
14/30314193 DC : 0 BS EN 2267-009 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 009: DRA FAMILY, SINGLE AND MULTICORE ASSEMBLY - PRODUCT STANDARD
16/30352465 DC : 0 BS EN 2267-010 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 010: DR FAMILY, SINGLE UV LASER PRINTABLE - PRODUCT STANDARD
12/30259533 DC : 0 BS EN 2591-100 - AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 100: GENERAL
16/30345025 DC : 0 BS EN 4611-003 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURE, BETWEEN -65 DEGREE C AND 135 DEGREE C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
BS EN 2267-011:2015 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55 °C and 260 °C DZA family, single and multicore assembly for use in low pressure atmosphere. Product standard
PREN 2235 : 200P4 AEROSPACE SERIES - SINGLE AND MULTICORE ELECTRICAL CABLES, SCREENED AND JACKETED - TECHNICAL SPECIFICATION
PREN 2267-012 : DRAFT 2014 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 012: DZ FAMILY, SINGLE UV LASER PRINTABLE FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD
PREN 2265-004 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 150 DEGREES C - PART 004: CO[2] LASER PRINTABLE - PRODUCT STANDARD
XP PREN 2266-005 : 1995 XP AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 200 DEGREE C - PART 005: UV LASER PRINTABLE - PRODUCT STANDARD
EN 3375-001:2007 Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical specification
PREN 2266-004 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 004: CO[2] LASER PRINTABLE - PRODUCT STANDARD
PREN 4611-002 : 200P2 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 002: GENERAL
PREN 4612-007 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 007: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET WITHOUT SCREEN - UV LASER PRINTABLE - PRODUCT STANDARD
PREN 2267-009 : 200P3 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 009: DRA FAMILY, SINGLE AND MULTICORE ASSEMBLY - PRODUCT STANDARD
PREN 4612-002 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 002: GENERAL
PREN 3375-001 : 200P1 AEROSPACE SERIES CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 001: TECHNICAL SPECIFICATION
PREN 2854-002 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL FOR GENERAL PURPOSE - CROSS SECTIONS EQUAL TO AND GREATER THAN 9 MM[2] - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 002: GENERAL
PREN 2266-002 : 200P2 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 002: GENERAL
PREN 2266-005 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 005: UV LASER PRINTABLE - PRODUCT STANDARD
PREN 2266-006 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 006: YAG X3 LASER PRINTABLE - PRODUCT STANDARD
PREN 4611-003 : 200P2 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
I.S. EN 4611-004:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 004: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
I.S. EN 4611-003:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
PREN 2854-003 : 200P2 AEROSPACE SERIES - CABLES, ELECTRICAL FOR GENERAL PURPOSE - CROSS SECTIONS EQUAL TO AND GREATER THAN 9 MM[2] - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 003: PRODUCT STANDARD
EN 2267-010:2017 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard
BS EN 2267-010:2017 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55 °C and 260 °C DR family, single UV laser printable. Product standard
NF EN 2591-100 : 2006 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 100: GENERAL
XP PREN 2265-002 : 1995 XP AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 150 DEGREE C - PART 002: GENERAL
XP PREN 2267-004 : 1995 XP AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 260 DEGREE C - PART 004: CO[2] LASER PRINTABLE - PRODUCT
BS EN 3375-001:2007 Aerospace series. Cable, electrical, for digital data transmission Technical specification
BS EN 3375-005:2007 Aerospace series. Cable, electrical, for digital data transmission Double braid + metallic layer. 77 Ohms. Type WV. Product standard
BS EN 3375-006:2006 Aerospace series. Cable, electrical, for digital data transmission Single braid. 78 Ohms. Type XM. Product standard
EN 2854-002:2009 Aerospace series - Cables, electrical for general purpose - Cross sections equal to and greater than 9 mm² - Operating temperatures between - 55 °C and 260 °C - Part 002: General
16/30345037 DC : 0 BS EN 4611-005 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 005: SILVER PLATED COPPER - OPERATING TEMPERATURE, BETWEEN -65 DEGREE C AND 150 DEGREE C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
XP PREN 2265-006 : 1995 XP AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 150 DEGREE C - PART 006: YAG X3 LASER PRINTABLE - PRODUCT STANDARD
09/30209902 DC : 0 BS EN 2267-011 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 011: XXA FAMILY, SINGLE AND MULTICORE ASSEMBLY FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD
I.S. EN 2267-010:2017 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 010: DR FAMILY, SINGLE UV LASER PRINTABLE - PRODUCT STANDARD
BS EN 4611-006:2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family Silver plated copper. Operating temperatures, between -65°C and 150°C. Dual extruded wall for open applications. UV laser printable. Product standard
01/710721 DC : 0 EN 4608-003 - AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - LIGHTWEIGHT SINGLE AND MULTICORE ASSEMBLY - OPERATING TEMPERATURE BETWEEN 65 DEGREES C AND 260 DEGREES C - PART 003: DN FAMILY - BRAIDED AND JACKETED - UV LASER PRINTABLE - PRODUCT STANDARD
BS EN 2854-003:2009 Aerospace series. Cables, electrical for general purpose. Cross sections equal to and greater than 9 mm<sup>2</sup>. Operating temperatures between -55 °C and 260 °C Product standard
14/30314194 DC : 0 BS EN 2267-010 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 010: DR FAMILY, SINGLE UV LASER PRINTABLE - PRODUCT STANDARD
11/30242768 DC : 0 BS EN 2267-010 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 260 DEGREE C - PART 010: DR FAMILY, SINGLE UV LASER PRINTABLE - PRODUCT STANDARD
06/30156164 DC : 0 BS EN 3375-008 - AEROSPACE SERIES - ELECTRICAL CABLES FOR SIGNAL DATA TRANSMISSIONS - PART 008: DOUBLE SCREENED, CHARACTERISTIC IMPEDANCE 77 +/- 3 OHMS, OPERATING TEMPERATURES -55 DEGREE C TO 260 DEGREE C - PRODUCT STANDARD
XP PREN 2267-002 : 1995 XP AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 260 DEGREE C - PART 002: GENERAL
PREN 2591-100 : 200P1 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 100: GENERAL
PREN 2242 : 200P2 AEROSPACE SERIES - CRIMPING OF ELECTRIC CABLES WITH CONDUCTORS DEFINED BY EN 2083, EN 4434 AND EN 2346
16/30345033 DC : 0 BS EN 4611-004 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 004: TIN PLATED COPPER - OPERATING TEMPERATURE, BETWEEN -65 DEGREE C AND 135 DEGREE C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
I.S. EN 4611-002:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 002: GENERAL
UNI EN 4612-002 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 002: GENERAL
XP PREN 2266-004 : 1995 XP AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 200 DEGREE C - PART 004: CO[2] LASER PRINTABLE - PRODUCT STANDARD
XP PREN 2266-002 : 1995 XP AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 200 DEGREE C - PART 002: GENERAL
PREN 2265-005 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 150 DEGREES C - PART 005: UV LASER PRINTABLE - PRODUCT STANDARD
XP PREN 2266-003 : 1995 XP AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 200 DEGREE C - PART 003: INK JET PRINTABLE - PRODUCT STANDARD
PREN 2265-002 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 150 DEGREES C - PART 002: GENERAL
PREN 4611-007 : 200P2 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 007: NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
PREN 4611-006 : 200P2 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 006: SILVER PLATED COPPER - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
I.S. EN 2854-003:2009 AEROSPACE SERIES - CABLES, ELECTRICAL FOR GENERAL PURPOSE - CROSS SECTIONS EQUAL TO AND GREATER THAN 9 MM[2] - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 003: PRODUCT STANDARD
UNI EN 4611-003 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 003: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
EN 4611-005:2012 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 005: Silver plated copper — Operating temperatures, between –65 °C and 150 °C - Single extruded wall for enclosed applications - UV laser printable - Product standard
DIN EN 2235:2015-11 Aerospace series - Single and multicore electrical cables, screened and jacketed - Technical specification; German and English version EN 2235:2015
I.S. EN 2267-002:2015 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 002: GENERAL
I.S. EN 2267-009:2017 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 009: DRA FAMILY, SINGLE AND MULTICORE ASSEMBLY - PRODUCT STANDARD
I.S. EN 3375-007:2016 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 007: DOUBLE BRAID - 77 OHMS - TYPE WW - PRODUCT STANDARD
I.S. EN 2235:2015 AEROSPACE SERIES - SINGLE AND MULTICORE ELECTRICAL CABLES, SCREENED AND JACKETED - TECHNICAL SPECIFICATION
EN 4611-002:2012 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 002: General
BS EN 2267-012:2015 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°C DZ family, single UV laser printable for use in low pressure atmosphere. Product standard
11/30242754 DC : 0 BS EN 2267-009 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 260 DEGREE C - PART 009: DRA FAMILY, SINGLE AND MULTICORE ASSEMBLY - PRODUCT STANDARD
NF EN 2854-002 : 2009 AEROSPACE SERIES - CABLES, ELECTRICAL FOR GENERAL PURPOSE - CROSS SECTIONS EQUAL TO AND GREATER THAN 9 MM[2] - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 002: GENERAL
XP PREN 3197 : 1994 XP AEROSPACE SERIES - INSTALLATION OF AIRCRAFT ELECTRICAL AND OPTICAL INTERCONNECTION SYSTEMS
BS EN 4611-003:2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family Tin plated copper. Operating temperatures, between -65 °C and 135 °C. Single extruded wall for enclosed applications. UV laser printable. Product standard
XP PREN 2266-006 : 1995 XP AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 200 DEGREE C - PART 006: YAG X3 LASER PRINTABLE - PRODUCT STANDARD
17/30368766 DC : 0 PREN 4612-002 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 002: GENERAL
16/30345022 DC : 0 BS EN 4611-002 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 002: GENERAL
XP PREN 2267-005 : 1995 XP AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 260 DEGREE C - PART 005: UV LASER PRINTABLE - PRODUCT STANDARD
UNI EN 2267-010 : 2014 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 010: DR FAMILY, SINGLE UV LASER PRINTABLE - PRODUCT STANDARD
09/30199821 DC : 0 BS EN 2267-002 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 002: GENERAL
PREN 2265-003 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 150 DEGREES C - PART 003: INK JET PRINTABLE - PRODUCT STANDARD
PREN 2267-002 : 200P5 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 002: GENERAL
I.S. EN 2242:2012 AEROSPACE SERIES - CRIMPING OF ELECTRIC CABLES WITH CONDUCTORS DEFINED BY EN 2083, EN 4434 AND EN 2346
I.S. EN 4611-009:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 009: BJ - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR USE AS CABLE CORES OR WITHIN EQUIPMENT IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD
I.S. EN 4611-008:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 008: BP - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS WITH ADDITIONAL PROTECTION IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD
I.S. EN 4611-005:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 005: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
I.S. EN 2267-012:2015 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 012: DZ FAMILY, SINGLE UV LASER PRINTABLE FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD
I.S. EN 4611-006:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 006: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
I.S. EN 4611-007:2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 007: NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
UNI EN 4611-005 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 005: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES AND 150 DEGREES - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
UNI EN 4611-007 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 007: NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
UNI EN 2242 : 2012 AEROSPACE SERIES - CRIMPING OF ELECTRIC CABLES WITH CONDUCTORS DEFINED BY EN 2083, EN 4434 AND EN 2346
NF EN 4612-002 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 002: GENERAL
BS EN 2267-008:2005 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°C DM family, single UV laser printable and multicore assembly. Product standard
BS EN 3375-003:2007 Aerospace series. Cable, electrical, for digital data transmission Single braid. 77 Ohms. Type KG. Product standard
EN 4611-003:2012 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 003: Tin plated copper - Operating temperatures, between -65 °C and 135 °C - Single extruded wall for enclosed applications - UV laser printable - Product standard
EN 4611-004:2012 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between –65 °C and 135 °C - Dual extruded wall for open applications - UV laser printable - Product standard
EN 2267-002:2015 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 002: General
EN 2266-003:2005 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 003: Ink jet printable - Product standard
EN 4611-009:2012 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 009: BJ - Nickel plated copper - Operating temperatures, between –65 °C and 150 °C - Single extruded wall for use as cable cores or within equipment in areas of high vibration, cable flexing and fluid contamination - UV laser printable - Product standard
UNI EN 2267-009 : 2013 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 009: DRA FAMILY, SINGLE AND MULTICORE ASSEMBLY - PRODUCT STANDARD
BS EN 4611-008:2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family BP. Nickel plated copper. Operating temperatures, between -65°C and 150°C. Dual extruded wall for open applications with additional protection in areas of high vibration, cable flexing and fluid contamination. UV laser printable. Product standard
BS EN 4611-002:2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family General
BS EN 2242:2012 Aerospace series. Crimping of electric cables with conductors defined by EN 2083, EN 4434 and EN 2346
UNI EN 4611-009 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 009: BJ - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR USE AS CABLE CORES OR WITHIN EQUIPMENT IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD
12/30273365 DC : 0 BS EN 2266-008 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 008: DRP (PAIR) DRT(3 CORES) DRQ (4 CORES) FAMILY, MULTICORE UV LASER PRINTABLE JACKETED CABLE - PRODUCT STANDARD
13/30281823 DC : 0 BS EN 2267-002 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 002: GENERAL
XP PREN 2265-003 : 1995 XP AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 150 DEGREE C - PART 003: INK JET PRINTABLE - PRODUCT STANDARD
13/30281820 DC : 0 BS EN 2235 - AEROSPACE SERIES - SINGLE AND MULTICORE ELECTRICAL CABLES, SCREENED AND JACKETED - TECHNICAL SPECIFICATION
09/30209901 DC : 0 BS EN 2267-012 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 012: XX FAMILY, SINGLE UV LASER PRINTABLE FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD
XP PREN 2267-003 : 1995 XP AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 260 DEGREE C - PART 003: INK JET PRINTABLE - PRODUCT STANDARD
BS EN 4612-002:2011 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed General
XP PREN 2235 : 1995 XP AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE SCREENED AND JACKETED - TECHNICAL SPECIFICATION
PREN 2267-011 : DRAFT 2014 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 011: DZA FAMILY, SINGLE AND MULTICORE ASSEMBLY FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD
NF EN 2854-003 : 2009 AEROSPACE SERIES - CABLES, ELECTRICAL FOR GENERAL PURPOSE - CROSS SECTIONS EQUAL TO AND GREATER THAN 9 MM[2] - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 003: PRODUCT STANDARD
PREN 3375-005 : 200P1 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 005: DOUBLE BRAID + METALLIC LAYER - 77 OHMS - TYPE WV - PRODUCT STANDARD
PREN 3375-007 : 200P2 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 007: DOUBLE BRAID - 77 OHMS - TYPE WW - PRODUCT STANDARD
RE.AERO 64041 : 1991 QUALIFICATION TESTS OF QUICK CONNECTIONS WITH CLIPS AND TABS ON COPPER OR COPPER ALLOY CABLE CONDUCTORS
XP PREN 2267-006 : 1995 XP AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 006: YAG X3 LASER PRINTABLE - PRODUCT STANDARD
I.S. EN 2267-011:2015 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 011: DZA FAMILY, SINGLE AND MULTICORE ASSEMBLY FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD
EN 4611-007:2012 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 007: Nickel plated copper - Operating temperatures, between –65 °C and 150 °C - Dual extruded wall for open applications - UV laser printable - Product standard
BS EN 2267-007:2005 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°C DMA family, single ink-jet printable and multicore assembly. Product standard
BS EN 2235:2015 Aerospace series. Single and multicore electrical cables, screened and jacketed. Technical specification
BS EN 3375-007:2006 Aerospace series. Cable, electrical, for digital data transmission Double braid. 77 Ohms. Type WW. Product standard
BS EN 2266-002:2005 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 200°C General
BS EN 2266-003:2005 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 200°C Ink jet printable. Product standard
BS EN 2267-009:2017 Aerospace series. Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C DRA family, single and multicore assembly. Product standard
BS EN 2266-007:2005 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 200°C UV laser printable multicore jacketed cable. Product standard
BS EN 2267-003:2005 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°C Inkjet printable. Product standard
BS EN 3375-004:2007 Aerospace series. Cable, electrical, for digital data transmission Double braid. 77 Ohms. Type WJ. Product standard
BS EN 2267-005:2006 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°C UV laser printable. Product standard
EN 2267-008:2005 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 008: DM family, single UV laser printable and multicore assembly - Product standard
EN 2267-005:2006 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 005: UV laser printable - Product standard
EN 2267-012:2015 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 012: DZ family, single UV laser printable for use in low pressure atmosphere - Product standard
EN 4611-008:2012 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 008: BP - Nickel plated copper - Operating temperatures, between –65 °C and 150 °C - Dual extruded wall for open applications with additional protection in areas of high vibration, cable flexing and fluid contamination - UV laser printable - Product standard
EN 2591:1992 Aerospace series - Elements of electrical and optical connection - Test methods - General
EN 3375-006:2006 Aerospace series - Cable, electrical, for digital data transmission - Part 006: Single braid - 78 Ohms - Type XM - Product standard
EN 2266-005:2005 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 005: UV laser printable - Product standard
EN 2267-009:2017 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 009: DRA family, single and multicore assembly - Product standard
EN 2266-002:2005 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 002: General
EN 2267-003:2005 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 003: Ink jet printable - Product standard
EN 2267-007:2005 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 007: DMA family, single ink-jet printable and multicore assembly - Product standard
EN 3375-005:2007 Aerospace series - Cable, electrical, for digital data transmission - Part 005: Double braid + metallic layer - 77 Ohms - Type WV - Product standard
EN 3375-003:2007 Aerospace series - Cable, electrical, for digital data transmission - Part 003: Single braid - 77 Ohms - Type KG - Product standard
EN 2266-007:2005 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 007: UV laser printable multicore jacketed cable - Product standard
EN 3375-004:2007 Aerospace series - Cable, electrical, for digital data transmission - Part 004: Double braid - 77 Ohms - Type WJ - Product standard
EN 2242:2012 Aerospace series - Crimping of electric cables with conductors defined by EN 2083, EN 4434 and EN 2346
EN 2235:2015 Aerospace series - Single and multicore electrical cables, screened and jacketed - Technical specification
EN 2267-011:2015 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 011: DZA family, single and multicore assembly for use in low pressure atmosphere - Product standard
EN 4612-002:2011 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 002: General
EN 3375-007:2016 Aerospace series - Cable, electrical, for digital data transmission - Part 007: Double braid - 77 Ohms - Type WW - Product standard
16/30345045 DC : 0 BS EN 4611-007 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY XLETFE FAMILY - PART 007: NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
I.S. EN 2854-002:2009 AEROSPACE SERIES - CABLES, ELECTRICAL FOR GENERAL PURPOSE - CROSS SECTIONS EQUAL TO AND GREATER THAN 9 MM[2] - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 002: GENERAL
08/30193331 DC : DRAFT NOV 2008 BS EN 3475-307 - AEROSPACE SERIES - CABLES, AIRCRAFT USE - TEST METHODS - PART 307: CORONA EXTINCTION VOLTAGE
BS EN 2854-002:2009 Aerospace series. Cables, electrical for general purpose. Cross sections equal to and greater than 9 mm2. Operating temperatures between -55°C and 260°C General
14/30314190 DC : 0 BS EN 3375-007 - AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 007: DOUBLE BRAID - 77 OHMS - TYPE WW - PRODUCT STANDARD
BS EN 2591-100:2005 Aerospace series. Elements of electrical and optical connection. Test methods General
I.S. EN 2591-100:2005 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 100: GENERAL
11/30245746 DC : 0 BS EN 3475-307 - AEROSPACE SERIES - CABLES, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 307: CORONA EXTINCTION VOLTAGE
15/30333342 DC : 0 BS EN 3375-001 - AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 001: TECHNICAL SPECIFICATION
EN 2854-003:2009 Aerospace series - Cables, electrical for general purpose - Cross sections equal to and greater than 9 mm² - Operating temperatures between – 55 °C and 260 °C - Part 003: Product standard
PREN 2267-003 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 003: INK JET PRINTABLE - PRODUCT STANDARD
PREN 2265-006 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 150 DEGREES C - PART 006: YAG X3 LASER PRINTABLE - PRODUCT STANDARD
PREN 3197 : 200P2 AEROSPACE SERIES - DESIGN AND INSTALLATION OF AIRCRAFT ELECTRICAL AND OPTICAL INTERCONNECTION SYSTEMS
UNI EN 4611-008 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 008: BP - NICKEL PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS WITH ADDITIONAL PROTECTION IN AREAS OF HIGH VIBRATION, CABLE FLEXING AND FLUID CONTAMINATION - UV LASER PRINTABLE - PRODUCT STANDARD
PREN 2267-005 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 005: UV LASER PRINTABLE - PRODUCT STANDARD
PREN 2266-003 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 003: INK JET PRINTABLE - PRODUCT STANDARD
PREN 2267-006 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 006: YAG X3 LASER PRINTABLE - PRODUCT STANDARD
PREN 4612-008 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY JACKETED OR SCREENED AND JACKETED - PART 008: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET AND SCREEN (BRAID) - UV LASER PRINTABLE - PRODUCT STANDARD
PREN 4611-004 : 200P2 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 004: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
PREN 2267-004 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 004: CO[2] LASER PRINTABLE - PRODUCT STANDARD
PREN 2267-010 : 200P4 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 010: DR FAMILY, SINGLE UV LASER PRINTABLE - PRODUCT STANDARD
UNI EN 4611-004 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 004: TIN PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 135 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
PREN 3375-006 : 200P1 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 006: SINGLE BRAID - 78 OHMS - TYPE XM - PRODUCT STANDARD
PREN 3375-004 : 0 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 004: DOUBLE BRAID - 77 OHMS - TYPE WJ - PRODUCT STANDARD
PREN 4611-005 : 200P2 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 005: SILVER PLATED COPPER - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 150 DEGREES C - SINGLE EXTRUDED WALL FOR ENCLOSED APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
BS EN 4611-004:2012 Aerospace series. Cables, electrical, for general purpose,single and multicore assembly. XLETFE Family Tin plated copper. Operating temperatures, between -65 °C and 135 °C. Dual extruded wall for open applications. UV laser printable. Product standard
I.S. EN 4612-002:2011 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 002: GENERAL
EN 2591-100:2005 Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General
XP PREN 2265-005 : 1995 XP AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 150 DEGREE C - PART 005: UV LASER PRINTABLE - PRODUCT STANDARD
I.S. EN 3375-001:2007 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 001: TECHNICAL SPECIFICATION
XP PREN 2265-004 : 1995 XP AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 150 DEGREE C - PART 004: CO[2] LASER PRINTABLE - PRODUCT STANDARD
NF EN 3375-001 : 2008 AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 001: TECHNICAL SPECIFICATION
UNI EN 4611-006 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 006: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS - UV LASER PRINTABLE - PRODUCT STANDARD
EN 4611-006:2012 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 006: Silver plated copper - Operating temperatures, between –65 °C and 150 °C - Dual extruded wall for open applications - UV laser printable - Product standard
BS EN 4611-005:2012 Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family Silver plated copper. Operating temperatures, between -65 °C and 150 °C. Single extruded wall for enclosed applications. UV laser printable. Product standard
BS EN 2266-005:2005 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 200°C UV laser printable. Product standard
BS EN 2267-002:2015 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55 °C and 260 °C General
BS EN 2591:1992 Elements of electrical and optical connection. Test methods. General
ONORM EN 2854-003 : 2009 AEROSPACE SERIES - CABLES, ELECTRICAL FOR GENERAL PURPOSE - CROSS SECTIONS EQUAL TO AND GREATER THAN 9 MM[2] - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 003: PRODUCT STANDARD

EN 3838:2010 Aerospace series - Requirements and tests on user-applied markings on aircraft electrical cables
EN 2235:2015 Aerospace series - Single and multicore electrical cables, screened and jacketed - Technical specification
EN 9102:2015 Aerospace series - Quality systems - First article inspection requirements
EN 2083:2001 Aerospace series - Copper and copper alloys conductors for electrical cables - Product standard
ISO 2574:1994 Aircraft — Electrical cables — Identification marking

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more