EN 175300:1996
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Sectional Specification: Rectangular connectors for frequencies below 3 MHz
15-09-1997
24-04-1996
CECC Specification systems for LF connectors
1 Scope
2 General
2.1 Related documents
2.2 Terminology
2.3 Classification into climatic categories
2.4 Creepage and clearance distances
2.5 Current
2.6 Marking
2.7 Type designation
3 General requirements, test and test schedules
3.1 Workmanship
3.2 Testing
3.3 Test schedules
4 Preparation of Detail Specifications (DS)
4.1 Titles of Detail Specification
4.2 Drawing information
4.3 System of lettering
4.4 Contents of Detail Specification
5 Quality assessment procedures
5.1 Primary stage of manufacture
5.2 Structurally similar components
5.3 System of levels
5.4 Grouping of tests
5.5 Component approval procedure
5.6 Maintenance of approval
5.7 Withdrawal or suspension of qualification
approval
5.8 Significant changes
5.9 Quality conformance inspection
5.10 Test records
5.11 Delivery of tested connectors
5.12 Release for deliveries before the completion of
Group B tests
5.13 Delayed delivery
5.14 In-process testing
6 Preparation of Detail Specifications
Annexes
A Common lettering system to be used on drawings
B Additional requirements applying to IEC 512 tests
C Additional Component Approval Procedures
Applies to rectangular connectors specifically designed to be used in equipment for telecommunication, electronic data processing and in similar electronic devices.
| Committee |
CLC/SR 48B
|
| DevelopmentNote |
Supersedes CECC 75300. (06/2016)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Withdrawn
|
| Standards | Relationship |
| SN EN 175300 : 1996 | Identical |
| NEN EN 175300 : 1996 | Identical |
| I.S. EN 175300:1998 | Identical |
| NBN EN 175300 : 2008 | Identical |
| DIN EN 175300:1996-11 | Identical |
| BS EN 175300:1997 | Identical |
| UNE-EN 175300:1997 | Identical |
| PN EN 175300 : 2002 | Identical |
| NF EN 175300 : 2014 | Identical |
| DS EN 175300 : 1996 | Identical |
| I.S. CECC 75301-802:1995 | RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ, TRAPEZOIDAL SHAPED SHELLS AND ROUND CONTACTS 01 MM WITH CRIMP, SOLDER AND PRESS-IN TERMINANONS FOR PRINTED BOARDS |
| CECC 75301-802 : 1994 | RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ, TRAPEZOIDAL SHAPED SHELLS AND ROUND CONTACTS 01 MM WITH CRIMP, SOLDER AND PRESS-IN TERMINANONS FOR PRINTED BOARDS |
| BS EN 175301-803:2006 | Detail specification: rectangular connectors. Flat contacts, 0,8 mm thickness, locking screw not detachable |
| BS CECC 299001:1999 | Technology approval schedule. Manufacture of electrical connectors |
| EN 175301-803:2006 | Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable |
| 04/30116868 DC : DRAFT JUL 2004 | EN 175301-803 - DETAIL SPECIFICATION - RECTANGULAR CONNECTORS - FLAT CONTACTS, 0,8 MM THICKNESS, LOCKING SCREW NOT DETACHABLE |
| CEI EN 175301-803 : 2007 | DETAIL SPECIFICATION: RECTANGULAR CONNECTORS - FLAT CONTACTS, 0,8 MM THICKNESS, LOCKING SCREW NOT DETACHABLE |
| CECC 00114-3 : 94 AMD 2 | CAPABILITY APPROVAL OF AN ELECTRONIC COMPONENT MANUFACTURING ACTIVITY |
| EN 61076-3-001:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-001: RECTANGULAR CONNECTORS - BLANK DETAIL SPECIFICATION |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| CECC 00100 : 1988 | BASIC RULES - TO BE USED IN CONNECTION WITH THE INTERNAL REGULATIONS OF THE FEN e.V |
| IEC 60807-1:1991 | Rectangular connectors for frequencies below 3 MHz - Part 1:Generic specification - General requirements and guide for thepreparation of detail specifications for connectors with assessedquality |
| IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
| CECC 00114-2 : 1994 | RULE OF PROCEDURE 14 - QUALITY ASSESSMENT PROCEDURES - PART 2: QUALIFICATION APPROVAL OF ELECTRONIC COMPONENTS |
| CECC 00009 : 1980 | BASIC SPECIFICATION: BASIC TESTING PROCEDURES AND MEASURING METHODS FOR ELECTROMECHANICAL COMPONENTS |
| CECC 00007 : 1978 | BASIC SPECIFICATION: SAMPLING PLANS AND PROCEDURES FOR INSPECTION BY ATTRIBUTES |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 60050-581:2008 | International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment |
| ISO/R 286:1962 | ISO system of limits and fits Part I : General, tolerances and deviations |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.