EN 16602-70-02:2014
Current
The latest, up-to-date edition.
Space product assurance - Thermal vacuum outgassing test for the screening of space materials
08-10-2014
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 Test overview
5 Requirements
Annex A (normative) - Materials identification
card (MIC) - DRD
Annex B (normative) - Micro-VCM worksheet - DRD
Annex C (normative) - Micro-VCM datasheet - DRD
Annex D (normative) - Thermal vacuum outgassing
test report - DRD
Annex E (normative) - Certificate of conformity
for Micro-VCM - DRD
Bibliography
This Standard describes a thermal vacuum test to determine the outgassing screening properties of materials proposed for use in the fabrication of spacecraft and associated equipment, for vacuum facilities used for flight hardware tests and for certain launcher hardware.This Standard covers the following:• critical design parameters of the test system;• critical test parameters such as temperature, time, pressure;• material sample preparation;• conditioning parameters for samples and collector plates;• presentation of the test data;• acceptance criteria;• certification of test systems and their operators by audits and round robin tests.The test described in this Standard is applicable for all unmanned spacecraft, launchers, payloads, experiments. The test is also valid for external hardware of inhabited space systems and for hardware to be used in terrestrial vacuum test facilities.The outgassing and condensation acceptance criteria for a material depend upon the application and location of the material and can be more severe than the standard requirements as given in clause 5.5.3.1.This standard may be tailored for the specific characteristics and constrains of a space project in conformance with ECSS‐S‐ST‐00. 7
Committee |
CEN/CLC/JTC 5
|
DevelopmentNote |
Supersedes EN 14091. (10/2014)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
CEI UNI EN 16602-70-02 : 1ED 2016 | Identical |
DIN EN 16602-70-02:2015-01 | Identical |
UNI CEI EN 16602-70-02 : 2015 | Identical |
NEN EN 16602-70-02 : 2014 | Identical |
NF EN 16602-70-02 : 2015 | Identical |
NBN EN 16602-70-02 : 2014 | Identical |
PN EN 16602-70-02 : 2014 | Identical |
NS EN 16602-70-02 : 2014 | Identical |
BS EN 16602-70-02:2014 | Identical |
UNE-EN 16602-70-02:2014 | Identical |
I.S. EN 16602-70-02:2014 | Identical |
PNE-FprEN 16602-70-02 | Identical |
SN EN 16602-70-02:2015 | Identical |
BS EN 16602-70-09:2015 | Space product assurance. Measurements of thermo-optical properties of thermal control materials |
BS EN 16602-70-18:2014 | Space product assurance. Preparation, assembly and mounting of RF coaxial cables |
BS EN 16602-70-06:2014 | Space product assurance. Particle and UV radiation testing for space materials |
BS EN 16602-70-10:2015 | Space product assurance. Qualification of printed circuit boards |
I.S. EN 16602-70-01:2014 | SPACE PRODUCT ASSURANCE - CLEANLINESS AND CONTAMINATION CONTROL |
I.S. EN 16602-70-11:2015 | SPACE PRODUCT ASSURANCE - PROCUREMENT OF PRINTED CIRCUIT BOARDS |
BS EN 16602-70-46:2014 | Space product assurance. Requirements for manufacturing and procurement of threaded fasteners |
BS EN 16602-70-08:2015 | Space product assurance. Manual soldering of high-reliability electrical connections |
I.S. EN 16602-70-05:2014 | SPACE PRODUCT ASSURANCE - DETECTION OF ORGANIC CONTAMINATION SURFACES BY INFRARED SPECTROSCOPY |
I.S. EN 16602-70-10:2015 | SPACE PRODUCT ASSURANCE - QUALIFICATION OF PRINTED CIRCUIT BOARDS |
BS EN 16603-20-08:2014 | Space engineering Photovoltaic assemblies and components |
BS EN 16602-70-01:2014 | Space product assurance. Cleanliness and contamination control |
I.S. EN 16602-70-46:2014 | SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS |
I.S. EN 16602-70-18:2014 | SPACE PRODUCT ASSURANCE - PREPARATION, ASSEMBLY AND MOUNTING OF RF COAXIAL CABLES |
BS EN 16602-70-13:2015 | Space product assurance. Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes |
I.S. EN 16603-20-08:2014 | SPACE ENGINEERING - PART 20-08: PHOTOVOLTAIC ASSEMBLIES AND COMPONENTS |
I.S. EN 16602-70-31:2014 | SPACE PRODUCT ASSURANCE - APPLICATION OF PAINTS AND COATINGS ON SPACE HARDWARE |
I.S. EN 16602-70:2016 | SPACE PRODUCT ASSURANCE - MATERIALS, MECHANICAL PARTS AND PROCESSES |
BS EN 16602-70-12:2016 | Space product assurance. Design rules for printed circuit boards |
EN 16602-70-12:2016 | Space product assurance - Design rules for printed circuit boards |
EN 16602-70-09:2015 | Space product assurance - Measurements of thermo-optical properties of thermal control materials |
EN 16602-70-46:2014 | Space product assurance - Requirements for manufacturing and procurement of threaded fasteners |
EN 16602-70-18:2014 | Space product assurance - Preparation, assembly and mounting of RF coaxial cables |
EN 16602-70-31:2014 | Space product assurance - Application of paints and coatings on space hardware |
EN 16602-70-05:2014 | Space product assurance - Detection of organic contamination surfaces by infrared spectroscopy |
EN 16602-70-10:2015 | Space product assurance - Qualification of printed circuit boards |
EN 16602-70-06:2014 | Space product assurance - Particle and UV radiation testing for space materials |
EN 16602-70-71:2016 | Space product assurance - Materials, processes and their data selection |
EN 16602-70-11:2015 | Space product assurance - Procurement of printed circuit boards |
EN 16602-70-01:2014 | Space product assurance - Cleanliness and contamination control |
EN 16603-20-08:2014 | Space engineering - Part 20-08: Photovoltaic assemblies and components |
EN 16602-70-13:2015 | Space product assurance - Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes |
EN 16602-70-08:2015 | Space product assurance - Manual soldering of high-reliability electrical connections |
I.S. EN 16602-70-06:2014 | SPACE PRODUCT ASSURANCE - PARTICLE AND UV RADIATION TESTING FOR SPACE MATERIALS |
BS EN 16602-70-31:2014 | Space product assurance. Application of paints and coatings on space hardware |
BS EN 16602-70:2016 | Space product assurance. Materials, mechanical parts and processes |
BS EN 16602-70-30:2014 | Space product assurance. Wire wrapping of high-reliability electrical connections |
I.S. EN 16602-70-13:2015 | SPACE PRODUCT ASSURANCE - MEASUREMENTS OF THE PEEL AND PULL-OFF STRENGTH OF COATINGS AND FINISHES USING PRESSURE-SENSITIVE TAPES |
BS EN 16602-70-05:2014 | Space product assurance. Detection of organic contamination surfaces by infrared spectroscopy |
I.S. EN 16602-70-71:2016 | SPACE PRODUCT ASSURANCE - MATERIALS, PROCESSES AND THEIR DATA SELECTION |
I.S. EN 16602-70-08:2015 | SPACE PRODUCT ASSURANCE - MANUAL SOLDERING OF HIGH-RELIABILITY ELECTRICAL CONNECTIONS |
I.S. EN 16602-70-09:2015 | SPACE PRODUCT ASSURANCE - MEASUREMENTS OF THERMO-OPTICAL PROPERTIES OF THERMAL CONTROL MATERIALS |
I.S. EN 16602-70-30:2014 | SPACE PRODUCT ASSURANCE - WIRE WRAPPING OF HIGH-RELIABILITY ELECTRICAL CONNECTIONS |
EN 16602-70-30 : 2014 COR 2014 | SPACE PRODUCT ASSURANCE - WIRE WRAPPING OF HIGH-RELIABILITY ELECTRICAL CONNECTIONS |
BS EN 16602-70-11:2015 | Space product assurance. Procurement of printed circuit boards |
EN 16602-70:2016 | Space product assurance - Materials, mechanical parts and processes |
CEI CEN/CLC/TR 17603-20-01:2023-11 | Space engineering - Guidelines for electrical design and interface requirements for power supply |
CEI UNI EN 16603-20-08:2023 | Space engineering - Photovoltaic assemblies and components |
EN 16601-00-01:2015 | Space systems - Glossary of terms |
EN 16602-10-09:2014 | Space product assurance - Nonconformance control system |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.