EN 16230-1:2013+A1:2014
Current
The latest, up-to-date edition.
Leisure karts - Part 1: Safety requirements and test methods for karts
17-12-2014
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Description of the kart
6 List of significant hazards
7 Safety requirements and/or protective measures
8 Verification of the safety requirements and/or
protective measures
9 Information for use
Annex A (normative) - Measurement methods for kart all
round protection system
Annex B (normative) - Crash test protocol
Annex C (normative) - Brake system performance tests -
leisure kart
Annex D (normative) - Noise emission test
Annex E (informative) - Vibration test methods
Annex ZA (informative) - Relationship between this
European Standard and the Essential Requirements
of EU Directive 2006/42/EC
Bibliography
This European Standard is applicable for karts, according to 3.1, that are not intended to be used on public roads.This European Standard applies to:-leisure karts only;-karts propelled by a combustion engine, including LPG combustion engines;-karts used on indoor and outdoor tracks, permanent or temporary;-karts used on supervised tracks designed for leisure karting, with a sealed ground (such as asphalt, concrete, ice or snow).This European Standard does not apply to:-karts used for competition organised by and under the responsibility of the CIK-FIA and/or ASN, ensuring through the granting of licenses by an ASN or one of its affiliated members as defined in the International Sporting code, compliance with the safety, sporting, disciplinary and technical rules of the CIAK-FIA and/ or ASN;-karts designed exclusively for competition and toys;-cross country karts;-karts with two or more seats;-karts used on tracks not mentioned above (such as mud, earth);-karts used in amusement parks.The requirements related to the hazards of electrical propulsion are not covered in this European Standard.The requirements related to whole-body vibration are not covered in this European Standard.This European Standard specifies appropriate measures to eliminate or reduce the risks arising from significant hazards, hazardous situations and events (see Clause 6) during operation and maintenance of the karts, when carried out as intended by the manufacturer.Safety in karting activities is dependent on a correct interaction between leisure karts and the track equipment and facilities. General recommendations for tracks to be used for leisure karting are included in this part of the standard.This document is not applicable to karts that are manufactured before the date of publication of this European Standard by CEN.NOTESpecific requirements for tracks design and operation will be included in a future Part 2 of this standard.
Committee |
CEN/TC 354
|
DevelopmentNote |
Supersedes PREN 16230-1. (02/2013) 2013 Edition Re-Issued in December 2014 & incorporates AMD 1 2014. (01/2015)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
SN EN 16230-1 : 2013 + A1 2015 | Identical |
NF EN 16230-1 : 2013 + A1 2015 | Identical |
NEN EN 16230-1 : 2013 + A1 2015 | Identical |
UNI EN 16230-1 : 2015 | Identical |
BS EN 16230-1 : 2013 | Identical |
DIN EN 16230-1:2015-04 | Identical |
NBN EN 16230-1 : 2013 + A1 2015 | Identical |
I.S. EN 16230-1:2013 | Identical |
NS EN 16230-1 : 2013 + A1 2014 | Identical |
PN EN 16230-1 : 2013 + A1 2015 | Identical |
UNI EN 16230-1 : 2013 | Identical |
UNE-EN 16230-1:2013+A1:2015 | Identical |
UNE-EN 16230-1:2013 | Identical |
I.S. EN 16230-2:2016 | LEISURE KARTS - PART 2: SAFETY REQUIREMENTS FOR KARTING FACILITIES |
UNE-EN 16230-2:2017 | Leisure karts - Part 2: Safety requirements for karting facilities |
EN 1032:2003+A1:2008 | Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value |
ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
ISO 14245:2006 | Gas cylinders Specifications and testing of LPG cylinder valves Self-closing |
ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
ISO 3864-2:2016 | Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels |
SAE J1349_201109 | ENGINE POWER TEST CODE - SPARK IGNITION AND COMPRESSION IGNITION - AS INSTALLED NET POWER RATING |
DIN 33956:2002-11 | GOCART-FACILITIES - SAFETY REQUIREMENTS AND TESTING |
CR 1030-1:1995 | Hand-arm vibration - Guidelines for vibration hazards reduction - Part 1: Engineering methods by design of machinery |
EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
EN ISO 5349-1:2001 | Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements (ISO 5349-1:2001) |
EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
EN 1442:2017 | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction |
ISO 8041:2005 | Human response to vibration Measuring instrumentation |
ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
ISO 5349-1:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements |
NFS 52 002 : 2014 | LIGHT MOTORIZED VEHICLES - ELECTRIC HIRE KARTS - SAFETY REQUIREMENTS |
NFS 52 003 : 2008 | KARTING CENTRES - SAFETY AND ENVIRONMENTAL REQUIREMENTS, TEST METHODS AND MANAGEMENT OF THE ACTIVITY |
ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
DIN 33955:2002-11 | GOCARTS - SAFETY REQUIREMENTS AND TESTING |
ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
ISO 15550:2016 | Internal combustion engines Determination and method for the measurement of engine power General requirements |
EN ISO 14245:2010 | Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2006) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.