EN 15807:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Railway applications - Pneumatic half couplings
19-03-2021
19-01-2011
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Design and manufacture
5 Type test methods
6 Individual inspection
7 In-Service assessment
8 Designation
9 Identification and marking
Annex A (informative) - Vacuum withstand
Annex B (informative) - MRP pneumatic half coupling for
emergency coupling hoses
Annex C (informative) - In-service trial
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2008/57/EC
Bibliography
This European Standard applies to pneumatic half couplings designed to couple either the brake pipes or main reservoir pipes of railway vehicles, without taking the type of vehicles and track-gauge into consideration.This European Standard gives the requirements for the design, dimensions, testing and quality assurance of pneumatic half couplings.
Committee |
CEN/TC 256
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
NBN EN 15807 : 2011 | Identical |
SN EN 15807 : 2011 | Identical |
NS EN 15807 : 2011 | Identical |
NF EN 15807 : 2011 | Identical |
UNE-EN 15807:2011 | Identical |
UNI EN 15807 : 2011 | Identical |
NEN EN 15807 : 2019 Ontw. | Identical |
PN EN 15807 : 2011 | Identical |
NEN EN 15807 : 2011 | Identical |
DIN EN 15807:2011-05 | Identical |
I.S. EN 15807:2011 | Identical |
BS EN 15807:2011 | Identical |
ONORM EN 15807 : 2011 | Identical |
DIN EN 15807:2019-05 (Draft) | Identical |
BS EN 16839:2017 | Railway applications. Rolling stock. Head stock layout |
15/30279805 DC : 0 | BS EN 15746-1 - RAILWAY APPLICATIONS - TRACK - ROAD RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING |
DIN EN 14033-1:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
14/30270317 DC : 0 | BS EN 14198 - RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS FOR GENERAL OPERATION |
I.S. EN 14198:2016 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
EN 14198:2016 | Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives |
PREN 14198 : DRAFT 2014 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS FOR GENERAL OPERATION |
RSSB GM/GN2607 : ISSUE 1 | GUIDANCE ON THE BRAKING REQUIREMENTS FOR HAULING UNBRAKED MULTIPLE UNITS IN FREIGHT TRAINS |
BS EN 14198 : 2016 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
DIN EN 14198:2017-03 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
PREN 14033-1 : DRAFT 2014 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
14/30258493 DC : 0 | BS EN 14033-1 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
I.S. EN 16839:2017 | RAILWAY APPLICATIONS - ROLLING STOCK - HEAD STOCK LAYOUT |
15/30270288 DC : 0 | BS EN 16839 - RAILWAY APPLICATIONS - ROLLING STOCK - HEAD STOCK LAYOUT |
DIN EN 14198:2015-01 (Draft) | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
I.S. EN 14033-1:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
EN 16839:2017 | Railway applications - Rolling stock - Head stock layout |
EN 14033-1:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running |
BS EN 14033-1:2017 | Railway applications. Track. Railbound construction and maintenance machines Technical requirements for running |
DIN EN 14033-1:2017-10 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING |
EN 14198:2016 | Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives |
ISO 1431-3:2017 | Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers |
EN ISO 228-2:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987) |
EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
2008/57/EC : 2008 AMD 5 2014 | DIRECTIVE 2008/1957/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 17 JUNE 2008 ON THE INTEROPERABILITY OF THE RAIL SYSTEM WITHIN THE COMMUNITY (RECAST) (TEXT WITH EEA RELEVANCE) |
EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
UIC 830-2 : 4ED 2003 | TECHNICAL SPECIFICATION FOR THE SUPPLY OF RING-SHAPED ELASTOMER JOINTS FOR BRAKE COUPLING HEADS |
UIC 830-3 : 3ED 2001 | TECHNICAL SPECIFICATION FOR THE SUPPLY OF COUPLER HEADS |
UIC 830-1 : 1981 AMD 2 | TECHNICAL SPECIFICATION FOR THE SUPPLY OF ELASTOMER HOSES FOR COMPRESSED AIR BRAKE COUPLINGS |
EN ISO 8033:2017 | Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) |
EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
ISO 8573-1:2010 | Compressed air Part 1: Contaminants and purity classes |
ISO 2285:2013 | Rubber, vulcanized or thermoplastic Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load |
EN 15179:2007 | Railway applications - Braking - Requirements for the brake system of coaches |
ISO 1431-1:2012 | Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing |
EN 50125-1:2014 | Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment |
EN 14601:2005+A1:2010 | Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
ISO 36:2017 | Rubber, vulcanized or thermoplastic Determination of adhesion to textile fabrics |
ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
ISO 8033:2016 | Rubber and plastics hoses Determination of adhesion between components |
UIC 541-1 : 8ED 2013 | BRAKES - REGULATIONS CONCERNING THE DESIGN OF BRAKE COMPONENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.