EN 15500:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment
01-05-2017
16-07-2008
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviations
5 Functionality
6 Test method
7 Classification and designation
8 Marking and documentation
Annex A (normative) - Functional and acceptance test
Annex B (informative) - Data
Bibliography
The purpose of this standard is to specify the applications, functionality set and application performance for electronic individual zone control equipment. The applications are for cooling and hot water or electrical heating as described in Annex B.This standard applies specifically to individual zone control equipment for maintaining temperature, humidity and air flow as a function of occupancy and demand operated with auxiliary electrical energy.Information required for the operation of the equipment may be processed using either analogue or digital techniques or a combination of both. Safety requirements remain unaffected by this standard.This standard refers to the input and output requirements of the controller and not of the input and output devices as e. g. sensors and actuators.This standard covers fixed-function, configurable and programmable controllers.The control equipment may or may not be connected to a data-network however communications aspects are not covered by this standard.These devices could be applied for any kind of building, intermittent or non-intermittent occupation, residential or non residential (see Annex B).
Committee |
CEN/TC 247
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
Standards | Relationship |
PN EN 15500 : 2009 | Identical |
NS EN 15500 : 1ED 2008 | Identical |
BS EN 15500:2008 | Identical |
NF EN 15500 : 2008 | Identical |
SN EN 15500 : 2008 | Identical |
NEN EN 15500 : 2008 | Identical |
NBN EN 15500 : 2008 | Identical |
UNE-EN 15500:2010 | Identical |
I.S. EN 15500:2008 | Identical |
UNI EN 15500 : 2008 | Identical |
DIN EN 15500:2008-12 | Identical |
11/30244232 DC : DRAFT JUNE 2011 | BS EN 15232 - ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT |
DIN EN 15316-2:2017-09 | ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 2: SPACE EMISSION SYSTEMS (HEATING AND COOLING), MODULE M3-5, M4-5 |
I.S. EN 15316-2:2017 | ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 2: SPACE EMISSION SYSTEMS (HEATING AND COOLING), MODULE M3-5, M4-5 |
DIN EN 15232:2012-04 | ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT |
BS EN 15232:2012 | Energy performance of buildings. Impact of Building Automation, Controls and Building Management |
DIN EN 12828:2003-06 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
I.S. EN 15232:2012 | ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT |
DIN EN 15500-1:2016-01 (Draft) | ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5 |
UNE-EN 15232:2014 | Energy performance of buildings - Impact of Building Automation, Controls and Building Management |
I.S. EN 12828:2012 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
VDI 3813 Blatt 2:2011-05 | Building automation and control systems (BACS) - Room control functions (RA functions) |
11/30246864 DC : 0 | BS EN 12098-3 - CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS |
PD CEN/TR 15316-6-2:2017 | Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies Explanation and justification of EN 15316-2, Module M3-5, M4-5 |
CEN/TR 15316-6-2:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-2: Explanation and justification of EN 15316-2, Module M3-5, M4-5 |
EN 15500-1:2017 | Energy Performance of Buildings - Control for heating, ventilating and air conditioning applications - Part 1: Electronic individual zone control equipment - Modules M3-5, M4-5, M5-5 |
UNI EN 15232 : 2012 | ENERGY PERFORMANCE OF BUILDINGS - IMPACT OF BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT |
UNI EN 12098-3 : 2013 | CONTROLS FOR HEATING SYSTEMS - PART 3: CONTROL EQUIPMENT FOR ELECTRICAL HEATING SYSTEMS |
UNI EN 12828 : 2014 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
14/30309947 DC : 0 | BS EN 15316-2 - HEATING SYSTEMS AND WATER BASED COOLING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 2: SPACE EMISSION SYSTEMS (HEATING AND COOLING) |
BS EN 15316-2:2017 | Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies Space emission systems (heating and cooling), Module M3-5, M4-5 |
I.S. EN 15500-1:2017 | ENERGY PERFORMANCE OF BUILDINGS - CONTROL FOR HEATING, VENTILATING AND AIR CONDITIONING APPLICATIONS - PART 1: ELECTRONIC INDIVIDUAL ZONE CONTROL EQUIPMENT - MODULES M3-5, M4-5, M5-5 |
DIN EN 12828:2014-07 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
EN 15316-2:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 2: Space emission systems (heating and cooling), Module M3-5, M4-5 |
EN 12828:2012+A1:2014 | Heating systems in buildings - Design for water-based heating systems |
EN 15232:2012 | Energy performance of buildings - Impact of Building Automation, Controls and Building Management |
S.R. CEN/TR 15316-6-2:2017 | ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 6-2: EXPLANATION AND JUSTIFICATION OF EN 15316-2, MODULE M3-5, M4-5 |
BS EN 15500-1:2017 | Energy Performance of Buildings. Control for heating, ventilating and air conditioning applications Electronic individual zone control equipment. Modules M3-5, M4-5, M5-5 |
BS EN 12828 : 2012 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
IEC 60038:2009 | IEC standard voltages |
EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
EN 12098-5:2017 | Energy Performance of Buildings - Controls for heating systems - Part 5: Start-stop schedulers for heating systems - Modules M3-5,6,7,8 |
EN 61000-6-3:2007/A1:2011/AC:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
ISO 16484-2:2004 | Building automation and control systems (BACS) — Part 2: Hardware |
EN 60947-1:2007/A2:2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014) |
IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
ISO 16484-3:2005 | Building automation and control systems (BACS) — Part 3: Functions |
EN ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
IEC 61000-6-1:2016 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
EN ISO 16484-3:2005 | Building automation and control systems (BACS) - Part 3: Functions (ISO 16484-3:2005) |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN 12098-2:2001 | Controls for heating systems - Part 2: Optimum start-stop control equipment for hot water heating systems |
EN ISO 16484-2:2004 | Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2004) |
EN 12098-1:2017 | Energy Performance of Buildings - Controls for heating systems - Part 1: Control equipment for hot water heating systems - Modules M3-5, 6, 7, 8 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.