EN 1550:1997+A1:2008
Current
The latest, up-to-date edition.
Machine-tools safety - Safety requirements for the design and construction of work holding chucks
30-07-2008
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 List of hazards
5 Safety requirements and/or measures
6 Information for use
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements
of EU Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements
of EU Directive 2006/42/EC
This European Standard sets out the requirements and/or measures to remove the hazards and limit the risk on work holding chucks which are defined in 3.1.This European standard covers all the hazards relevant to this component.These hazards are listed in clause 4.The requirements of this standard concern designers, manufacturers, suppliers and importers of work holding chucks.This standard also includes information which the manufacturer shall provide to the user.This standard is primarily directed to components which are manufactured after the date of issue of this standard.
Committee |
CEN/TC 143
|
DevelopmentNote |
1997 Edition Re-Issued in July 2008 & incorporates AMD 1 2008. (08/2008)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
SN EN 1550 : 1998 + A1 2008 | Identical |
UNI EN 1550 : 2008 | Identical |
NEN EN 1550 : 1997 + A1 2008 | Identical |
I.S. EN 1550:1998 | Identical |
NBN EN 1550 : 1997 + A1 2008 | Identical |
NF EN 1550 : 1997 + A1 2008 | Identical |
DIN EN 1550:2008-11 | Identical |
BS EN 1550 : 1997 | Identical |
PN EN 1550 : 1999 + A1 2010 | Identical |
NS EN 1550 : 1997 + A1 2008 | Identical |
UNE-EN 1550:1998 | Identical |
UNE-EN 1550:1998+A1:2008 | Identical |
BS EN 1550:1997+A1:2008 | Identical |
I.S. EN 12415:2000 | SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
I.S. EN 13128:2001 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
I.S. EN 14070:2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
UNE-ISO 19719:2013 | Machine tools -- Work holding chucks -- Vocabulary |
BS EN 13128 : 2001 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
DIN EN 14070:2009-07 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
EN 12717:2001+A1:2009 | Safety of machine tools - Drilling machines |
EN 12478:2000/AC:2001 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
I.S. EN 12840:2001 | SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
BS ISO 19719:2010 | Machine tools. Work holding chucks. Vocabulary |
DIN EN 13128:2009-09 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
DIN EN 12417:2009-07 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
I.S. EN 12717:2001 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
DIN EN 13788:2002-04 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
VDI 3106:2004-04 | Determination of permissible speed (rpm) of lathe chucks (jaw chucks) |
I.S. EN 13788:2002 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
DIN EN 12717:2009-07 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
BS EN 12478:2001 | Safety of machine tools. Large numerically controlled turning machines and turning centres |
UNI EN 12417 : 2009 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
UNI EN 14070 : 2009 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
UNI EN 13128 : 2009 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
UNI EN 12717 : 2009 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
07/30166811 DC : 0 | BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES |
I.S. EN 12478:2000 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
BS EN 12840:2001 | Safety of machine tools. Manually controlled turning machines with or without automatic control |
BS EN 12417 : 2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
BS EN 12717 : 2001 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
BS EN 14070 : 2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
BS EN 12415:2001 | Safety of machine tools. Small numerically controlled turning machines and turning centres |
BS EN 13788:2002 | Machine tools. Safety. Multi-spindle automatic turning machines |
EN 13788 : 2001 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
I.S. EN 12417:2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
ISO 19719:2010 | Machine tools Work holding chucks Vocabulary |
EN 12415:2000/A1:2002 | SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
EN 12840 : 2001 | SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
ISO 3442:1991 | Self-centring chucks for machine tools with two-piece jaws (tongue and groove type) — Sizes for interchangeability and acceptance test specifications |
ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
ISO 9401:1991 | Machine tools Jaw mountings on power chucks |
ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
ISO 3089:2005 | Machine tools Test conditions for self-centring, manually operated chucks with one-piece jaws |
1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.