EN 14295 : 2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
WELDING CONSUMABLES - WIRE AND TUBULAR CORED ELECTRODES AND ELECTRODE-FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION
08-03-2022
12-01-2013
Foreword
1 Scope
2 Normative references
3 Classification
4 Symbols and requirements
4.1 Symbol for the process
4.2 Symbol for the tensile properties
4.3 Symbol for the impact properties of all-weld metal
4.4 Symbol for the type of welding flux
4.5 Symbol for the chemical composition of wire electrodes
or tubular cored electrode-flux combinations
4.6 Symbol for the stress relief treatment
5 Mechanical tests
5.1 General
5.2 Preheating and interpass temperatures
5.3 Welding conditions
6 Chemical analysis
7 Technical delivery conditions
8 Designation
Bibliography
Specifies requirements for classification of electrode-flux combinations and all-weld metal in the as welded or stress relieved condition for submerged arc welding of steels with a minimum yield strength higher than 500 MPa. One flux may be classified with different electrodes. The wire electrode is also classified separately based on its chemical composition.
| Committee |
TC 121
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| Standards | Relationship |
| UNI EN 14295 : 2005 | Identical |
| UNE-EN 14295:2004 | Identical |
| NBN EN 14295 : 2003 | Identical |
| NF EN 14295 : 2004 | Identical |
| DIN EN 14295 E : 2004 | Identical |
| BS EN 14295:2003 | Identical |
| PN EN 14295 : 2008 | Identical |
| SN EN 14295 : 2004 | Identical |
| NS EN 14295 : 2003 | Identical |
| NEN EN 14295 : 2003 | Identical |
| I.S. EN 14295:2003 | Identical |
| DIN EN 14295:2004-01 | Identical |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 17/30351439 DC : 0 | BS EN ISO 26304 - WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE-FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN ISO 26304:2018 | WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE-FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION (ISO 26304:2017) |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN ISO 26304:2018 | Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification (ISO 26304:2017) |
| UNE-EN ISO 26304:2012 | Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification (ISO 26304:2011) |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN ISO 26304:2011-11 | WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE-FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION (ISO 26304:2011) |
| ISO 26304:2017 | Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels — Classification |
| CR 10261 : 1995 | ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS |
| ISO 544:2011 | Welding consumables Technical delivery conditions for filler materials and fluxes Type of product, dimensions, tolerances and markings |
| EN ISO 6847:2013 | Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2013) |
| ISO 6847:2013 | Welding consumables Deposition of a weld metal pad for chemical analysis |
| ISO 31-0:1992 | Quantities and units Part 0: General principles |
| EN 1597-1 : 1997 | WELDING CONSUMABLES - TEST METHODS - TEST PIECE FOR ALL-WELD METAL TEST SPECIMENS IN STEEL, NICKEL AND NICKEL ALLOYS |
| EN 760:1996 | Welding consumables - Fluxes for submerged arc welding - Classification |
| ISO 13916:2017 | Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.