EN 13861:2011
Current
Current
The latest, up-to-date edition.
Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
Published date
19-10-2011
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Application of ergonomics standards in
the design of machinery
5 Information for use
Annex A (normative) - Relation between hazards as described
described in EN ISO 12100 and applicable B-standards
related to ergonomics
Annex B (informative) - Checklist for listing the limits of
the machinery (step 1)
Annex C (informative) - Additional requirements for C-type
standardization
Annex D (informative) - List of ergonomics standards
applicable to the design of machinery safety
standards
Bibliography
This European Standard provides a methodology to achieve a coherent application of various ergonomics standards for the design of machinery. This standard presents a step model calling upon specific standards. To this end, Annex A shows a reference table with relation between hazards as described in EN ISO 12100:2010 and applicable B-standards related to ergonomics.This European Standard can only be used in combination with other relevant ergonomics standards.This European Standard provides guidance where no relevant or suitable ergonomics clauses in C-type standards are available.This European Standard may also be used for incorporating ergonomics in the drafting of C-type standards.
| Committee |
CEN/TC 122
|
| DevelopmentNote |
Supersedes PREN 13861. (10/2005) Supersedes UNE EN 13861. (04/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| I.S. EN 13861:2011 | Identical |
| DIN EN 13861:2012-01 | Identical |
| NBN EN 13861 : 2011 | Identical |
| UNE-EN 13861:2011 | Identical |
| SN EN 13861:2012 | Identical |
| BS EN 13861:2011 | Identical |
| UNI EN 13861 : 2011 | Identical |
| NEN EN 13861 : 2011 | Identical |
| NS EN 13861 : 2011 | Identical |
| UNE-EN 13861:2003 | Identical |
| PN EN 13861 : 2012 | Identical |
| NF EN 13861 : 2012 | Identical |
| PNE-EN 13861 | Identical |
| BS EN ISO 12100:2010 | Safety of machinery. General principles for design. Risk assessment and risk reduction |
| PD CEN/TR 16710-1:2015 | Ergonomics methods Feedback method. A method to understand how end users perform their work with machines |
| DIN EN 15093:2009-06 | Safety of machinery - Safety requirements for hot flat rolling mills |
| BS EN 15093:2008 | Safety of machinery. Safety requirements for hot flat rolling mills |
| I.S. EN 1012-3:2013 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| UNI EN ISO 12100 : 2010 | SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION |
| DIN EN 13675:2010-10 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment (includes Amendment A1:2010) |
| BS EN 710 : 1998 | SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| PD ISO/TR 18569:2004 | Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
| DIN EN 14931:2006-08 | Pressure vessels for human occupancy (PVHO) - Multi-place pressure chamber systems for hyperbaric therapy - Performance, safety requirements and testing |
| CEN/TR 16710-1:2015 | Ergonomics methods - Part 1: Feedback method - A method to understand how end users perform their work with machines |
| DIN EN ISO 12100-2:2004-04 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
| BS EN 14931:2006 | Pressure vessels for human occupancy (PVHO). Multi-place pressure chambers for hyperbaric therapy. Performance, safety requirements and testing |
| 04/30057165 DC : 0 | BS EN 14931 - PRESSURE VESSELS FOR HUMAN OCCUPANCY (PVHO) - MULTI-PLACE PRESSURE CHAMBERS FOR HYPERBARIC THERAPY - PERFORMANCE, SAFETY REQUIREMENTS AND TESTING |
| 07/30142135 DC : 0 | BS EN 1012-1 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS |
| DIN EN 15949:2012-05 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
| UNI EN 15093 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| 09/30201995 DC : 0 | BS EN 15949 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| UNI EN 15949 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| ISO/TR 18569:2004 | Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
| DIN EN 1012-1:2011-02 | Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors |
| DIN EN 869:2009-12 | Safety of machinery - Safety requirements for pressure metal diecasting units (includes Amendment A1:2009) |
| DIN EN 14656:2010-10 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010) |
| BS EN 14673 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| I.S. EN 869:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS |
| I.S. EN 14656:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| I.S. EN 1012-1:2010 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS |
| I.S. EN 13675:2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| I.S. EN 14673:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| I.S. EN 710:1998 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT |
| ONORM EN 15094 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| 09/30201246 DC : 0 | BS EN 710:1997/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT ASSOCIATED EQUIPMENT |
| 09/30175681 DC : 0 | BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| UNI EN 15094 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| I.S. EN 15949:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| DIN EN 15094:2009-04 | Safety of machinery - Safety requirements for cold flat rolling mills |
| 08/30156074 DC : DRAFT APR 2008 | BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| 12/30265803 DC : DRAFT JUNE 2012 | BS EN 62714-2 - ENGINEERING DATA EXCHANGE FORMAT FOR USE IN INDUSTRIAL AUTOMATION SYSTEMS ENGINEERING - AUTOMATION - PART 2: ROLE LIBRARIES |
| BS EN 15094:2008 | Safety of machinery. Safety requirements for cold flat rolling mills |
| I.S. EN 16710-2:2016 | ERGONOMICS METHODS - PART 2: A METHODOLOGY FOR WORK ANALYSIS TO SUPPORT DESIGN |
| BS EN 1012-3:2013 | Compressors and vacuum pumps. Safety requirements Process compressors |
| UNE-EN 710:1998 | SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT. |
| DIN EN 14673:2010-10 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (includes Amendment A1:2010) |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| UNI EN 1012-1 : 2010 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS |
| UNI EN ISO 12100-2 : 2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
| UNI EN 14673 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| UNI EN 1012-3 : 2014 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| UNI EN 710 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT |
| UNI EN 14656 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| UNI EN 869 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS |
| UNI EN 13675 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| BS EN 15949:2012 | Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills |
| 09/30180832 DC : DRAFT AUG 2009 | BS EN 13675 AMD1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND FINISHING LINE EQUIPMENT |
| 09/30175684 DC : 0 | BS EN 14673:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| 09/30201664 DC : 0 | BS EN ISO 12100 - SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN, RISK ASSESSMENT AND RISK REDUCTION |
| S.R. CWA 16688:2013 | BATTERY SWAP SYSTEMS INTERFACES FOR ELECTRIC VEHICLES |
| I.S. EN 15094:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| UNE-EN ISO 12100:2012 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| DIN EN 710:2010-10 | Safety of machinery - Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment (includes Amendment A1:2010) |
| BS EN 13675 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| BS EN 869 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| EN 13675:2004+A1:2010 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment |
| EN 14656:2006+A1:2010 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals |
| EN 15094:2008 | Safety of Machinery - Safety requirements for cold flat rolling mills |
| EN 15949:2012 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
| EN 16710-2:2016 | Ergonomics methods - Part 2: A methodology for work analysis to support design |
| EN 15093:2008 | Safety of Machinery - Safety requirements for hot flat rolling mills |
| EN 14931:2006 | Pressure vessels for human occupancy (PVHO) - Multi-place pressure chamber systems for hyperbaric therapy - Performance, safety requirements and testing |
| EN 869:2006+A1:2009 | Safety of machinery - Safety requirements for pressure metal diecasting units |
| EN 14673:2006+A1:2010 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals |
| 14/30293469 DC : 0 | BS EN 16710 - ERGONOMICS - A METHODOLOGY FOR WORK ANALYSIS TO SUPPORT DESIGN |
| I.S. EN ISO 12100-2:2003 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
| 13/30273033 DC : 0 | BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
| ANSI/ISO 12100 : 2012 | SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION |
| BS EN 16710-2:2016 | Ergonomics methods A methodology for work analysis to support design |
| I.S. EN 15093:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| S.R. CEN/TR 16710-1:2015 | ERGONOMICS METHODS - PART 1: FEEDBACK METHOD - A METHOD TO UNDERSTAND HOW END USERS PERFORM THEIR WORK WITH MACHINES |
| I.S. EN 14931:2006 | PRESSURE VESSELS FOR HUMAN OCCUPANCY (PVHO) - MULTI-PLACE PRESSURE CHAMBER SYSTEMS FOR HYPERBARIC THERAPY - PERFORMANCE, SAFETY REQUIREMENTS AND TESTING |
| DIN EN 16710-2:2016-10 | ERGONOMICS METHODS - PART 2: A METHODOLOGY FOR WORK ANALYSIS TO SUPPORT DESIGN |
| I.S. EN ISO 12100:2010 | SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION |
| BS EN 14656 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| BS EN 1012-1:2010 | Compressors and vacuum pumps. Safety requirements Air compressors |
| EN 1012-3:2013 | Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors |
| EN 1012-1:2010 | Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors |
| EN 1005-4:2005+A1:2008 | Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery |
| ISO 10075-2:1996 | Ergonomic principles related to mental workload — Part 2: Design principles |
| ISO 9241-11:1998 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 11: Guidance on usability |
| ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| CEN Guide 414:2017 | Safety of machinery - Rules for the drafting and presentation of safety standards |
| EN 1746:1998 | Safety of machinery - Guidance for the drafting of the noise clauses of safety standards |
| EN ISO 7250-1:2017 | Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks (ISO 7250-1:2017) |
| EN ISO 9241-110:2006 | Ergonomics of human-system interaction - Part 110: Dialogue principles (ISO 9241-110:2006) |
| EN ISO 11204:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
| ISO 11200:2014 | Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
| ISO 9241-5:1998 | Ergonomic requirements for office work with visual display terminals (VDTs) — Part 5: Workstation layout and postural requirements |
| ISO 9241-17:1998 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 17: Form filling dialogues |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| EN 12464-1:2011 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
| EN ISO 10075-1:2017 | Ergonomic principles related to mental workload - Part 1: General issues and concepts, terms and definitions (ISO 10075-1:2017) |
| EN 1032:2003+A1:2008 | Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| EN ISO 11064-2:2000 | Ergonomic design of control centres - Part 2: Principles for the arrangement of control suites (ISO 11064-2:2000) |
| ISO 5349-2:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO 9241-110:2006 | Ergonomics of human-system interaction Part 110: Dialogue principles |
| EN 547-2:1996+A1:2008 | Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
| ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
| ISO 9921:2003 | Ergonomics Assessment of speech communication |
| ISO 20643:2005 | Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission |
| IEC 61310-2:2007 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| EN 981:1996+A1:2008 | Safety of machinery - System of auditory and visual danger and information signals |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| EN 894-2:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
| EN ISO 9241-11:1998 | Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11: Guidance on usability (ISO 9241-11:1998) |
| EN ISO 11064-6:2005 | Ergonomic design of control centres - Part 6: Environmental requirements for control centres (ISO 11064-6:2005) |
| CR 12349:1996 | Mechanical vibration - Guide to the health effects of vibration on the human body |
| IEC 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| EN 61310-2:2008 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| EN 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| ISO 10326-1:2016 | Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements |
| ISO 9241-210:2010 | Ergonomics of human-system interaction Part 210: Human-centred design for interactive systems |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ISO 7243:2017 | Ergonomics of the thermal environment — Assessment of heat stress using the WBGT (wet bulb globe temperature) index |
| EN 614-2:2000+A1:2008 | Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks |
| ISO 9241-12:1998 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 12: Presentation of information |
| EN 1837:1999+A1:2009 | Safety of machinery - Integral lighting of machines |
| EN ISO 10075-2:2000 | Ergonomic principles related to mental workload - Part 2: Design principles (ISO 10075-2:1996) |
| EN ISO 9241-306:2008 | Ergonomics of human-system interaction - Part 306: Field assessment methods for electronic visual displays (ISO 9241-306:2008) |
| EN 1299:1997+A1:2008 | Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 14738:2002 | Safety of machinery — Anthropometric requirements for the design of workstations at machinery |
| EN 61310-3:2008 | Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators |
| EN 547-1:1996+A1:2008 | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
| EN 1005-1:2001+A1:2008 | Safety of machinery - Human physical performance - Part 1: Terms and definitions |
| EN 1005-2:2003+A1:2008 | Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
| ISO 11064-4:2013 | Ergonomic design of control centres — Part 4: Layout and dimensions of workstations |
| IEC 61310-3:2007 | Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators |
| EN 414 : 2000 | SAFETY OF MACHINERY - RULES FOR THE DRAFTING AND PRESENTATION OF SAFETY STANDARDS |
| ISO 7726:1998 | Ergonomics of the thermal environment — Instruments for measuring physical quantities |
| EN ISO 11079:2007 | Ergonomics of the thermal environment - Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects (ISO 11079:2007) |
| ISO 9241-16:1999 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 16: Direct manipulation dialogues |
| EN ISO 7731:2008 | Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| EN ISO 11688-2:2000 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
| EN ISO 9241-5:1999 | Ergonomic requirements for office work with visual display terminals (VDTs) - Part 5: Workstation layout and postural requirements (ISO 9241-5:1998) |
| EN 292-1 : 1991 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY |
| EN ISO 26800:2011 | Ergonomics - General approach, principles and concepts (ISO 26800:2011) |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 2631-4:2001 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems |
| ISO 14122-4:2016 | Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
| EN ISO 9241-6:1999 | Ergonomic requirements for office work with visual display terminals (VDTs) - Part 6: Guidance on the work environment (ISO 9241-6:1999) |
| ISO 11064-6:2005 | Ergonomic design of control centres — Part 6: Environmental requirements for control centres |
| EN ISO 9241-15:1997 | Ergonomic requirements for office work with visual display terminals (VDTs) - Part 15: Command dialogues (ISO 9241-15:1997) |
| CR 1030-1:1995 | Hand-arm vibration - Guidelines for vibration hazards reduction - Part 1: Engineering methods by design of machinery |
| EN ISO 13731:2001 | Ergonomics of the thermal environment - Vocabulary and symbols (ISO 13731:2001) |
| EN ISO 11200:2014 | Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014) |
| ISO 11079:2007 | Ergonomics of the thermal environment Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| ISO 9241-14:1997 | Ergonomic requirements for office work with visual display terminals (VDTs) — Part 14: Menu dialogues |
| EN ISO 9241-13:1998 | Ergonomic requirements for office work with visual display terminals (VDTs) - Part 13: User guidance (ISO 9241-13:1998) |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN ISO 15537:2004 | Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs (ISO 15537:2004) |
| ISO 9241-303:2011 | Ergonomics of human-system interaction — Part 303: Requirements for electronic visual displays |
| EN 60447:2004 | Basic and safety principles for man-machine interface, marking and identification - Actuating principles |
| EN ISO 7726:2001 | Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998) |
| ISO 9241-15:1997 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 15: Command dialogues |
| ISO 11690-2:1996 | Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 2: Noise control measures |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| EN ISO 8996:2004 | Ergonomics of the thermal environment - Determination of metabolic rate (ISO 8996:2004) |
| IEC 60447:2004 | Basic and safety principles for man-machine interface, marking and identification - Actuating principles |
| EN 27243:1993 | Hot environments - Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature) (ISO 7243:1989) |
| EN ISO 5349-1:2001 | Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements (ISO 5349-1:2001) |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| ISO 7250-1:2017 | Basic human body measurements for technological design — Part 1: Body measurement definitions and landmarks |
| EN 1005-5:2007 | Safety of machinery - Human physical performance - Part 5: Risk assessment for repetitive handling at high frequency |
| EN ISO 7730:2005 | Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005) |
| EN 842:1996+A1:2008 | Safety of machinery - Visual danger signals - General requirements, design and testing |
| ISO 11690-1:1996 | Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 1: Noise control strategies |
| EN ISO 9241-17:1998 | Ergonomic requirements for office work with visual display terminals (VDTs) - Part 17: Form filling dialogues (ISO 9241-17:1998) |
| ISO 2631-2:2003 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz) |
| EN ISO/TS 15694 : 2004 | MECHANICAL VIBRATION AND SHOCK - MEASUREMENT AND EVALUATION OF SINGLE SHOCKS TRANSMITTED FROM HAND-HELD AND HAND-GUIDED MACHINES TO THE HAND-ARM SYSTEM |
| EN ISO 11064-4:2013 | Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2013) |
| EN ISO 9921:2003 | Ergonomics - Assessment of speech communication (ISO 9921:2003) |
| EN 547-3:1996+A1:2008 | Safety of machinery - Human body measurements - Part 3: Anthropometric data |
| EN ISO 14122-4:2016 | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) |
| EN ISO 6385:2016 | Ergonomics principles in the design of work systems (ISO 6385:2016) |
| EN 12464-2:2014 | Light and lighting - Lighting of work places - Part 2: Outdoor work places |
| ISO 8996:2004 | Ergonomics of the thermal environment Determination of metabolic rate |
| ISO 7933:2004 | Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain |
| EN ISO 9241-16:1999 | Ergonomic requirements for office work with visual display terminals (VDTs) - Part 16: Direct manipulation dialogues (ISO 9241-16:1999) |
| ISO 8041:2005 | Human response to vibration Measuring instrumentation |
| ISO/TS 14415:2005 | Ergonomics of the thermal environment Application of International Standards to people with special requirements |
| EN 28662-1:1992 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 1: General (ISO 8662-1:1988) |
| ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| EN ISO 13732-3:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005) |
| EN ISO 9241-300:2008 | Ergonomics of human-system interaction - Part 300: Introduction to electronic visual display requirements (ISO 9241-300:2008) |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| EN ISO 11690-2:1996 | Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures (ISO 11690-2:1996) |
| ISO 7730:2005 | Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria |
| EN ISO 7933:2004 | Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004) |
| ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
| EN ISO 9241-14:1999 | Ergonomic requirements for office work with visual display terminals (VDTs) - Part 14: Menu dialogues (ISO 9241-14:1995) |
| ISO 11064-3:1999 | Ergonomic design of control centres — Part 3: Control room layout |
| ISO 1999:2013 | Acoustics Estimation of noise-induced hearing loss |
| ISO 15535:2012 | General requirements for establishing anthropometric databases |
| EN ISO 15535:2012 | General requirements for establishing anthropometric databases (ISO 15535:2012) |
| EN 12198-1:2000+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| ISO 8662-1:1988 | Hand-held portable power tools Measurement of vibrations at the handle Part 1: General |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| ISO 5349-1:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements |
| ISO 8201:1987 | Acoustics Audible emergency evacuation signal |
| EN ISO 9241-210:2010 | Ergonomics of human-system interaction - Part 210: Human-centred design for interactive systems (ISO 9241-210:2010) |
| EN 1005-3:2002+A1:2008 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
| ISO 9241-300:2008 | Ergonomics of human-system interaction — Part 300: Introduction to electronic visual display requirements |
| EN 12786:2013 | Safety of machinery - Requirements for the drafting of the vibration clauses of safety standards |
| ISO 9241-6:1999 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 6: Guidance on the work environment |
| ISO 13732-3:2005 | Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 3: Cold surfaces |
| ISO 15537:2004 | Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| EN ISO 9241-12:1998 | Ergonomic requirements for office work with visual display terminals (VDTs) - Part 12: Presentation of information (ISO 9241-12:1998) |
| EN ISO 14122-1:2016 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN ISO 11202:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| ISO 6385:2016 | Ergonomics principles in the design of work systems |
| EN ISO 11203:2009 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
| ISO 8995-1:2002 | Lighting of work places — Part 1: Indoor |
| ISO 11064-2:2000 | Ergonomic design of control centres — Part 2: Principles for the arrangement of control suites |
| ISO 9241-306:2008 | Ergonomics of human-system interaction Part 306: Field assessment methods for electronic visual displays |
| ISO 13731:2001 | Ergonomics of the thermal environment Vocabulary and symbols |
| EN 894-4:2010 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| ISO 11204:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| EN ISO 9241-303:2011 | Ergonomics of human-system interaction - Part 303: Requirements for electronic visual displays (ISO 9241-303:2011) |
| EN ISO 14738:2008 | Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005) |
| EN ISO 11690-1:1996 | Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies (ISO 11690-1:1996) |
| ISO 9241-13:1998 | Ergonomic requirements for office work with visual display terminals (VDTs) — Part 13: User guidance |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| ISO 5805:1997 | Mechanical vibration and shock — Human exposure — Vocabulary |
| ISO/TS 15694:2004 | Mechanical vibration and shock — Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system |
| ISO 8727:1997 | Mechanical vibration and shock — Human exposure — Biodynamic coordinate systems |
| EN 894-1:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.