EN 13782:2015
Current
The latest, up-to-date edition.
Temporary structure - Tents - Safety
22-04-2015
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements for design,
analysis and examination
5 Selection of materials
6 Principles of numerical analysis
7 Design actions
8 Verification of stability and equilibrium
9 Ground anchorages
10 Other structural components
11 Manufacture and supply
Annex A (informative) - Pressure coefficients for
closed tents of round shape
Annex B (informative) - Special design and
manufacture criteria and operation
Annex C (informative) - Examination and approval
Bibliography
This European Standard specifies safety requirements which need to be observed at design, calculation, manufacture, installation, maintenance, of mobile, temporary installed tents with more than 50 m2 ground area.This European Standard applies also to multiple small tents which are normally not covered by this standard and will be installed close together and exceed 50 m2 in sum.NOTEInformation is given in Annex C on Examination and Approval.
Committee |
CEN/TC 152
|
DevelopmentNote |
Supersedes PREN 13782. (04/2015)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
UNI EN 13782:2015 | Identical |
NS EN 13782 : 2005 | Identical |
DIN EN 13782:2015-06 | Identical |
NF EN 13782 : 2015 | Identical |
NEN EN 13782 : 2015 | Identical |
I.S. EN 13782:2015 | Identical |
BS EN 13782:2015 | Identical |
NBN EN 13782 : 2015 | Identical |
PN EN 13782 : 2015 | Identical |
UNE-EN 13782:2016 | Identical |
UNI EN 13782 : 2006 | Identical |
SN EN 13782 : 2015 | Identical |
DIN EN 16508:2016-02 | TEMPORARY WORKS EQUIPMENT - ENCAPSULATION CONSTRUCTIONS - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN |
DIN EN 15619 E : 2014 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
12/30256977 DC : 0 | BS EN 15619 - RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
BS EN 15619:2014 | Rubber or plastic coated fabrics. Safety of temporary structures (tents). Specification for coated fabrics intended for tents and related structures |
I.S. EN 15619:2014 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
I.S. EN 16508:2015 | TEMPORARY WORKS EQUIPMENT - ENCAPSULATION CONSTRUCTIONS - PERFORMANCE REQUIREMENTS AND GENERAL DESIGN |
S.R. CWA 15902-2:2009 | LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 2: SPECIFICATIONS FOR DESIGN, MANUFACTURE AND FOR USE OF ALUMINIUM AND STEEL TRUSSES AND TOWERS |
UNI EN 15619 : 2014 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
07/30158827 DC : 0 | BS EN 15619 - RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
EN 16508:2015 | Temporary works equipment - Encapsulation constructions - Performance requirements and general design |
EN 15619:2014 | Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures |
BS EN 16508:2015 | Temporary works equipment. Encapsulation constructions. Performance requirements and general design |
DIN EN 15619:2014-07 | RUBBER OR PLASTIC COATED FABRICS - SAFETY OF TEMPORARY STRUCTURES (TENTS) - SPECIFICATION FOR COATED FABRICS INTENDED FOR TENTS AND RELATED STRUCTURES |
EN ISO 1346:2012 | Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) - 3-, 4-, 8- and 12-strand ropes (ISO 1346:2012) |
EN 12385-2:2002+A1:2008 | Steel wire ropes - Safety - Part 2: Definitions, designation and classification |
EN 12385-4:2002+A1:2008 | Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications |
ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
EN 12385-1:2002+A1:2008 | Steel wire ropes - Safety - Part 1: General requirements |
ISO 1141:2012 | Fibre ropes Polyester 3-, 4-, 8- and 12-strand ropes |
EN 12385-3:2004+A1:2008 | Steel wire ropes - Safety - Part 3: Information for use and maintenance |
ISO 1969:2004 | Fibre ropes — Polyethylene — 3- and 4-strand ropes |
ISO 2602:1980 | Statistical interpretation of test results Estimation of the mean Confidence interval |
EN ISO 1969:2004 | Fibre ropes - Polyethylene - 3- and 4-strand ropes (ISO 1969:2004) |
EN 10204:2004 | Metallic products - Types of inspection documents |
ISO 1346:2012 | Fibre ropes Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) 3-, 4-, 8- and 12-strand ropes |
EN 15619:2014 | Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures |
EN ISO 7010 : 2012 AMD 7 2017 | GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011/AMD 7:2016) |
EN ISO 1141:2012 | Fibre ropes - Polyester - 3-, 4-, 8- and 12-strand ropes (ISO 1141:2012) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.