EN 13523-3:2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
Superseded date
25-10-2021
Superseded by
Published date
18-06-2014
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Apparatus
6 Sampling
7 Specimens
8 Procedure
9 Expression of results
10 Accuracy
11 Test report
Bibliography
This part of EN 13523 specifies procedures for determining the instrumental colour difference (CIELAB) of an organic coating on a metallic substrate.Establishing a standard as well as the magnitude of an acceptable colour difference are not covered by this method. Two appropriate methods are given in this part of EN 13523:a)instrumental colour difference measurement using a tristimulus colorimeter;b)instrumental colour difference measurement using a spectrophotometer or equivalent.Care shall be taken when measuring e.g. -textured surfaces;-fluorescent coatings;-metameric coatings;-multi-coloured, pearlescent, metallic or special colour effect coatings.In order to determine whether metamerism is present, the metamerism index is determined (see EN 13523-15) and/or a visual examination (see EN 13523-22) is performed with different artificial light sources.
| Committee |
CEN/TC 139
|
| DevelopmentNote |
Supersedes PREN 13523-3. (06/2014)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SN EN 13523-3:2014 | Identical |
| NEN EN 13523-3 : 2014 | Identical |
| DIN EN 13523-3:2014-08 | Identical |
| I.S. EN 13523-3:2014 | Identical |
| NBN EN 13523-3 : 2014 | Identical |
| UNI EN 13523-3 : 2014 | Identical |
| NF EN 13523-3 : 2014 | Identical |
| UNE-EN 13523-3:2014 | Identical |
| NS EN 13523-3 : 2014 | Identical |
| BS EN 13523-3:2014 | Identical |
| PN EN 13523-3 : 2014 | Identical |
| ONORM EN 13523-3 : 2014 | Identical |
| DS EN 13523-3 : 2014 | Identical |
| PREN 13523-21 : DRAFT 2016 | COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS |
| I.S. EN 10169-2:2006 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| 08/30188882 DC : DRAFT DEC 2008 | BS EN 13523-29 - COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPPING) |
| PREN 13523-13 : DRAFT 2012 | COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT |
| PREN 13523-10 : DRAFT 2015 | COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION |
| I.S. EN 10169:2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| UNE-EN 13523-29:2017 | Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping) |
| DIN EN 13523-15:2015-09 | Coil coated metals - Test methods - Part 15: Metamerism |
| DIN EN 1396:2015-06 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| BS EN 13523-13:2014 | Coil coated metals. Test methods Resistance to accelerated ageing by the use of heat |
| BS EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products General information (definitions, materials, tolerances, test methods) |
| EN 13523-23:2015 | Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide |
| EN 13523-26:2014 | Coil coated metals - Test methods - Part 26: Resistance to condensation of water |
| EN 10169-2:2006 | Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications |
| EN 10169-3:2003 | Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications |
| EN 13523-13:2014 | Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat |
| EN 10169:2010+A1:2012 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| EN 13523-29:2017 | Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping) |
| 15/30329710 DC : 0 | BS EN 13523-29 - COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING) |
| 03/309848 DC : DRAFT JUNE 2003 | EN 13523-19 - COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING |
| UNI EN 13523-19 : 2011 | COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING |
| I.S. EN 13523-29:2017 | COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING) |
| 12/30268982 DC : 0 | BS EN 13523-13 - COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT |
| BS EN 13523-29:2017 | Coil coated metals. Test methods Resistance to environmental soiling (Dirt pick-up and striping) |
| 14/30291744 DC : 0 | BS EN 13523-23 - COIL COATED METALS - TEST METHODS - PART 23: RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE |
| BS EN 10169 : 2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| NF EN 13523-19 : 2011 | COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING |
| DIN EN 13523-26:2014-08 | Coil coated metals - Test methods - Part 26: Resistance to condensation of water |
| DIN EN 13523-10:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION |
| I.S. EN 13523-23:2015 | COIL COATED METALS - TEST METHODS - PART 23: RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE |
| I.S. EN 13523-21:2017 | COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS |
| I.S. EN 13523-13:2014 | COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT |
| I.S. EN 1396:2015 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| DIN EN 10169-2:2006-07 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| DIN EN 10169-3:2003-09 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS |
| DIN EN 10169-1:2004-04 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| I.S. EN 13523-15:2015 | COIL COATED METALS - TEST METHODS - PART 15: METAMERISM |
| I.S. EN 13523-10:2017 | COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION |
| I.S. EN 13523-26:2014 | COIL COATED METALS - TEST METHODS - PART 26: RESISTANCE TO CONDENSATION OF WATER |
| DIN EN 10169:2012-06 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions (includes Amendment A1:2012) |
| DIN EN 13523-29:2015-12 (Draft) | COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING) |
| I.S. EN 10169-1:2004 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| DIN EN 13523-21:2016-07 (Draft) | COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS |
| 13/30286946 DC : 0 | BS EN 1396 - ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| PREN 13523-23 : DRAFT 2014 | COIL COATED METALS - TEST METHODS - PART 23: RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE |
| DIN EN 13523-19:2011-09 | COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING |
| BS EN 13523-15:2015 | Coil coated metals. Test methods Metamerism |
| BS EN 1396:2007 | Aluminium and aluminium alloys. Coil coated sheet and strip for general applications. Specifications |
| UNE-EN 13523-10:2017 | Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation |
| BS EN 10169-3:2003 | Continuously organic coated (coil coated) steel flat products Products for building interior applications |
| UNE-EN 13523-19:2011 | Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing |
| UNI EN 13523-13 : 2014 | COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT |
| 15/30329704 DC : 0 | BS EN 13523-10 - COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION |
| 14/30291747 DC : 0 | BS EN 13523-15 - COIL COATED METALS - TEST METHODS - PART 15: METAMERISM |
| I.S. EN 13523-19:2011 | COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING |
| DIN EN 13523-13:2014-08 | COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT |
| DIN EN 13523-23:2015-09 | Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide |
| BS EN 10169-2:2006 | Continuously organic coated (coil coated) steel flat products Products for building exterior applications |
| UNE-EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| BS EN 13523-21:2017 | Coil coated metals. Test methods Evaluation of outdoor exposed panels |
| UNE-EN 13523-21:2017 | Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels |
| BS EN 13523-26:2014 | Coil coated metals. Test methods Resistance to condensation of water |
| UNE-EN 13523-23:2015 | Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide |
| UNE-EN 10169:2011 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| UNI EN 13523-26 : 2014 | COIL COATED METALS - TEST METHODS - PART 26: RESISTANCE TO CONDENSATION OF WATER |
| EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| EN 13523-21:2017 | Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels |
| I.S. EN 10169-3:2003 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS |
| 12/30268979 DC : 0 | BS EN 13523-26 - COIL COATED METALS - TEST METHODS - PART 26: RESISTANCE TO CONDENSATION OF WATER |
| 08/30188146 DC : 0 | BS EN 10169 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| 02/713103 DC : DRAFT NOV 2002 | PREN 10169-1 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| 16/30340557 DC : 0 | BS EN 13523-21 - COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS |
| PREN 13523-29 : DRAFT 2015 | COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING) |
| PREN 1396 : DRAFT 2013 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
| BS EN 13523-19:2011 | Coil coated metals. Test methods Panel design and method of atmospheric exposure testing |
| UNI EN 10169 : 2012 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| UNE-EN 13523-15:2015 | Coil coated metals - Test methods - Part 15: Metamerism |
| BS EN 13523-10:2017 | Coil coated metals. Test methods Resistance to fluorescent UV radiation and water condensation |
| BS EN 13523-23:2015 | Coil coated metals. Test methods Resistance to humid atmospheres containing sulfur dioxide |
| EN 13523-19:2011 | Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing |
| EN 13523-15:2015 | Coil coated metals - Test methods - Part 15: Metamerism |
| EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) |
| DIN EN 13523-29:2017-05 | Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping) |
| DIN EN 13523-10:2017-05 | Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation |
| EN 13523-10:2017 | Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation |
| EN 23270:1991 | Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing (ISO 3270:1984) |
| ISO 11664-3:2012 | Colorimetry Part 3: CIE tristimulus values |
| EN ISO 11664-4:2011 | Colorimetry - Part 4: CIE 1976 L*a*b* Colour space (ISO 11664-4:2008) |
| ISO 11664-4:2008 | Colorimetry Part 4: CIE 1976 L*a*b* Colour space |
| EN 13523-0:2014 | Coil coated metals - Test methods - Part 0: General introduction |
| EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| EN 10169:2010+A1:2012 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| EN 13523-22:2017 | Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
| ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
| EN 13523-15:2015 | Coil coated metals - Test methods - Part 15: Metamerism |
| EN ISO 11664-3:2013 | Colorimetry - Part 3: CIE tristimulus values (ISO 11664-3:2012) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.