EN 13480-3:2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Metallic industrial piping - Part 3: Design and calculation
Amended by
Superseded date
29-08-2020
Published date
28-06-2017
Publisher
Sorry this product is not available in your region.
European foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and units
4 Basic design criteria
5 Design stresses
6 Design of piping components under internal
pressure
7 Design of ends under internal pressure
8 Openings and branch connections
9 Design of piping components under external
pressure
10 Design for cyclic loading
11 Integral attachments
12 Flexibility analysis and acceptance criteria
13 Pipe Supports
Annex A (informative) - Dynamic analysis
Annex B (normative) - More accurate calculation
of bends and elbows
Annex C (informative) - Expansion joints
Annex D (normative) - Flanges
Annex E (normative) - Design of branch
connections in piping accessories
Annex F (informative) - Testing during
operation in the case of cyclic loading
Annex G (informative) - Physical properties
of steels
Annex H (normative) - Flexibility characteristics,
flexibility and stress intensification factors
and section moduli of piping components
and geometrical discontinuities
Annex I (informative) - Production testing of
spring supports and shock arrestors (shock
absorbers)
Annex J (normative) - Type testing of support
components
Annex K (informative) - Attachment of supports
to structures
Annex L (informative) - Buckling of linear type
supports
Annex M (informative) - Design guidance for
structural components
Annex N (normative) - Documentation of supports
Annex O (normative) - Alternative method for
checking branch connections
Annex P (informative) - Recommended gaskets
for industrial piping
Annex Q (informative) - Simplified pipe stress
analysis
Annex Y (informative) - History of EN 13480-3
Annex ZA (informative) - Relationship between
this European Standard and the Essential
Requirements of EU Directive
2014/68/EU aimed to be covered
Bibliography
This Part of this European Standard specifies the design and calculation of industrial metallic piping systems, including supports, covered by EN 13480.
| Committee |
CEN/TC 267
|
| DevelopmentNote |
Supersedes PREN 13480-3. (10/2005)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| Standards | Relationship |
| UNI EN 13480-3:2021 | Identical |
| UNI EN 13480-3:2020 | Identical |
| ÖNORM EN 13480-3:2017 08 01 | Identical |
| DS EN 13480-3 : 2017 | Identical |
| NF EN 13480-3 : 2017 | Identical |
| UNE-EN 13480-3:2017 | Identical |
| UNE-EN 13480-3:2013 | Identical |
| NBN EN 13480-3 : 2012 | Identical |
| NEN EN 13480-3 : 2017 | Identical |
| NS EN 13480-3 : 2017 | Identical |
| I.S. EN 13480-3:2017 | Identical |
| PN EN 13480-3 : 2017 | Identical |
| SN EN 13480-3 : 2017 | Identical |
| UNI EN 13480-3 : 2012 | Identical |
| BS EN 13480-3:2017 | Identical |
| UNI EN 13480-3:2022 | Identical |
| UNI EN 13480-3:2023 | Identical |
| BS EN 10253-2:2007 | Butt-welding pipe fittings Non alloy and ferritic alloy steels with specific inspection requirements |
| 09/30186448 DC : 0 | BS EN 13941 - DESIGN AND INSTALLATION OF REINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
| 03/302503 DC : DRAFT FEB 2003 | BS EN 14276-2 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| 03/306044 DC : DRAFT APR 2003 | BS EN 14656 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| CEN/TR 16787:2014 | Industrial Gas Installation - Guideline |
| CSA Z10535.1 : 2015 | HOISTS FOR THE TRANSFER OF DISABLED PERSONS - REQUIREMENTS AND TEST METHODS |
| 11/30246678 DC : 0 | BS EN 13480-4 - METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION |
| I.S. EN 1515-4:2009 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| I.S. EN ISO 4126-3:2006 | SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 3: SAFETY VALVES AND BURSTING DISC SAFETY DEVICES IN COMBINATION |
| PREN 14276-2 : DRAFT 2017 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| I.S. EN 378-2:2016 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION |
| BS EN 14917 : 2009 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| S.R. CEN/TR 16787:2014 | INDUSTRIAL GAS INSTALLATION - GUIDELINE |
| EN 14917:2009+A1:2012 | Metal bellows expansion joints for pressure applications |
| UNE-EN 13480-6:2017 | Metallic industrial piping - Part 6: Additional requirements for buried piping |
| EN 14071:2015 | LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment |
| I.S. EN 15711:2009 | VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS |
| PD CEN/TR 14585-3:2017 | Corrugated metal hose assemblies for pressure applications Design method |
| I.S. EN 13480-1:2017 | METALLIC INDUSTRIAL PIPING - PART 1: GENERAL |
| BS EN 13480-1:2017 | Metallic industrial piping General |
| I.S. EN 13480-2:2017 | METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS |
| BS EN 13480-8:2017+A1:2019 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
| BS EN 13480-5:2017 | Metallic industrial piping Inspection and testing |
| NFPA 750 : 2015 | WATER MIST FIRE PROTECTION SYSTEMS |
| BS EN 13480-8:2017 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
| BS EN 13480-2:2017 | Metallic industrial piping Materials |
| DIN EN 12952-9:2003-04 | Water-tube boilers and auxiliary installations - Part 9: Requirements for firing systems for pulverized solid fuels for the boiler |
| DIN EN 1591-1:2014-04 | FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION |
| UNE-EN 378-2:2017 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
| 11/30235014 DC : 0 | BS EN 13135 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| I.S. EN ISO 10535:2006 | HOISTS FOR THE TRANSFER OF DISABLED PERSONS - REQUIREMENTS AND TEST METHODS |
| EN 12952-14:2004 | Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution |
| DIN EN 12952-14:2004-09 | Water-tube boilers and auxiliary installations - Part 14: Requirements for fluegas DENOX systems using liquified pressurized ammonia and ammonia water solution |
| EN 12952-3:2011 | Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler |
| DIN EN 15711:2009-08 | VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS |
| EN 13480-4:2017 | Metallic industrial piping - Part 4: Fabrication and installation |
| EN 12952-9:2002 | Water-tube boilers and auxiliary installations - Part 9: Requirements for firing systems for pulverized solid fuels for the boiler |
| DIN EN 15949:2012-05 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
| DIN EN 14917:2012-06 | Metal bellows expansion joints for pressure applications (includes Amendment A1:2012) |
| EN 13135:2013+A1:2018 | Cranes - Safety - Design - Requirements for equipment |
| DIN EN 10253-2:2008-09 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| BS EN ISO 4126-3:2006 | Safety devices for protection against excessive pressure Safety valves and bursting disc safety devices in combination |
| DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| BS EN 13135 : 2013 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| BS EN 15711:2009 | Vitreous and porcelain enamels. Glass lined flanged steel pipes and flanged steel fittings. Quality requirements |
| DIN EN ISO 28721-4:2016-03 | VITREOUS AND PORCELAIN ENAMELS - GLASSLINED APPARATUS FOR PROCESS PLANTS - PART 4: QUALITY REQUIREMENTS FOR GLASSLINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS (ISO 28721-4:2015) |
| 03/306593 DC : DRAFT APR 2003 | BS EN 14673 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| BS ISO 28721-4 : 2010 | VITREOUS AND PORCELAIN ENAMELS - GLASS-LINED APPARATUS FOR PROCESS PLANTS - PART 4: QUALITY REQUIREMENTS FOR GLASS-LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS |
| UNI EN 1515-4 : 2010 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| PREN 13480-4 : DRAFT 2011 | METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION |
| 10/30227671 DC : 0 | BS EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| UNE-EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
| NF EN 1515-4 : 2010 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| BS EN 15061 : 2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| I.S. EN 14071:2015 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT |
| PREN 17206 : DRAFT 2018 | ENTERTAINMENT TECHNOLOGY - LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - SPECIFICATIONS FOR GENERAL REQUIREMENTS (EXCLUDING ALUMINUM AND STEEL TRUSSES AND TOWERS) |
| I.S. EN 13480-6:2017 | METALLIC INDUSTRIAL PIPING - PART 6: ADDITIONAL REQUIREMENTS FOR BURIED PIPING |
| EN 10253-2:2007 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| I.S. EN 13135:2013 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| UNI EN 15949 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| UNE-EN 14071:2015 | LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment |
| I.S. EN 13480-5:2017 | METALLIC INDUSTRIAL PIPING - PART 5: INSPECTION AND TESTING |
| BS EN ISO 28721-4:2015 | Vitreous and porcelain enamels. Glass-lined apparatus for process plants Quality requirements for glass-lined flanged steel pipes and flanged steel fittings |
| UNE-EN 13480-5:2017 | Metallic industrial piping - Part 5: Inspection and testing |
| BS EN 14071:2015 | LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Ancillary equipment |
| EN 13480-5:2017 | Metallic industrial piping - Part 5: Inspection and testing |
| I.S. EN 10253-2:2007 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| S.R. CWA 15902-1:2009 | LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS) |
| DIN EN 14656:2010-10 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010) |
| BS EN ISO 10535:2006 | Hoists for the transfer of disabled persons. Requirements and test methods |
| BS EN 1591-1:2013 | Flanges and their joints. Design rules for gasketed circular flange connections Calculation |
| BS EN 746-2:2010 | Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems |
| BS EN 14673 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| EN ISO 4126-3:2006 | Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006) |
| I.S. EN 14678-1:2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| I.S. EN 14656:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| I.S. EN 746-2:2010 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS |
| I.S. EN 13480-4:2017 | METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION |
| DIN EN ISO 4126-3:2006-06 | Safety devices for protection against exessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006) |
| I.S. EN 14125:2013 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| I.S. EN 13480-8:2017&LC:2019 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| I.S. EN 12952-3:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS OF THE BOILER |
| I.S. EN 13941:2009 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
| I.S. EN 14673:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| I.S. EN 1591-1:2013 | FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION |
| NF EN 14276-2 : 2007 + A1 2011 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| NF EN 12952-3 : 2012 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS OF THE BOILER |
| I.S. EN 12952-9:2002 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 9: REQUIREMENTS FOR FIRING SYSTEMS FOR PULVERIZED SOLID FUELS FOR THE BOILER |
| VDI 2290:2012-06 | Emission control - Sealing constants for flange connections |
| PREN 13480-5 : DRAFT 2011 | METALLIC INDUSTRIAL PIPING - PART 5: INSPECTION AND TESTING |
| 09/30197538 DC : 0 | BS ISO 12778 - VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS |
| 12/30260023 DC : 0 | BS EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| 09/30202316 DC : 0 | BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
| 09/30175681 DC : 0 | BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| DIN EN 15061:2009-05 | Safety of machinery - Safety requirements for strip processing line machinery and equipment (includes Amendment A1:2008) |
| DIN EN 10253-4:2008-06 | Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements |
| 13/30291774 DC : 0 | BS EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION |
| I.S. EN 15949:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| NF EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| PD CEN/TR 16787:2014 | Industrial Gas Installation. Guideline |
| 04/30118252 DC : DRAFT AUG 2004 | EN 14917 - METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| PREN 13941 : DRAFT 2009 | DESIGN AND INSTALLATION OF REINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
| 05/30114218 DC : DRAFT FEB 2005 | EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| UNI EN 10253-4 : 2009 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| EN 13480-6:2017 | Metallic industrial piping - Part 6: Additional requirements for buried piping |
| PREN 13480-8 : DRAFT 2012 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| EN 13480-1:2017 | Metallic industrial piping - Part 1: General |
| UNE-EN 13135:2013 | Cranes - Safety - Design - Requirements for equipment |
| I.S. EN 1092-1:2007 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| I.S. EN 14917:2009 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| DIN EN 746-2:2011-02 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| UNE-EN 15711:2010 | Vitreous and porcelain enamels - Glass lined flanged steel pipes and flanged steel fittings - Quality requirements |
| DIN EN 14276-2:2011-05 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| DIN EN 14673:2010-10 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (includes Amendment A1:2010) |
| ISO 4126-3:2006 | Safety devices for protection against excessive pressure Part 3: Safety valves and bursting disc safety devices in combination |
| UNE-EN 14678-1:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| 18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
| UNI EN 14276-2 : 2011 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| EN 14678-1:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| UNI EN 1591-1 : 2014 | FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION |
| UNI EN 13941 : 2011 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
| UNI EN 14673 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| UNI EN 15061 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| UNI EN 15711 : 2009 | VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS |
| UNI EN 12952-3 : 2012 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS OF THE BOILER |
| UNI EN 14656 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| UNI EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| UNI EN 14125 : 2013 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| ONORM EN 15061 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| UNI EN 746-2 : 2011 | INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS |
| UNI EN 14678-1 : 2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| BS EN 15949:2012 | Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills |
| PREN 14678-1 : DRAFT 2010 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| 03/108196 DC : 0 | EN 10253-4 - BUTT WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| 18/30366946 DC : 0 | BS EN 17206 - ENTERTAINMENT TECHNOLOGY - LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - SPECIFICATIONS FOR GENERAL REQUIREMENTS (EXCLUDING ALUMINUM AND STEEL TRUSSES AND TOWERS) |
| 16/30336440 DC : DRAFT MAR 2016 | BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| PREN 14125 : DRAFT 2011 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| 11/30231856 DC : 0 | BS EN 14125 - THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| 04/30123607 DC : DRAFT OCT 2004 | EN 15061:2004 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| 12/30266928 DC : 0 | BS EN 14071 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT |
| 16/30342037 DC : 0 | BS EN 13941-1 - DISTRICT HEATING PIPES - DESIGN AND INSTALLATION OF THERMAL INSULATED BONDED SINGLE AND TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 1: DESIGN |
| BS EN 1515-4:2009 | Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| PREN 10253-4 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| UNI EN 14917 : 2012 | METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| 08/30173031 DC : DRAFT JAN 2008 | BS EN 1515-4 - FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| BS EN 10253-4:2008 | Butt-welding pipe fittings Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements |
| PREN 378-2 : DRAFT 2013 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION |
| BS EN 13480-6:2017 | Metallic industrial piping Additional requirements for buried piping |
| I.S. EN 15061:2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| S.R. CEN/TR 14585-3:2017 | CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 3: DESIGN METHOD |
| EN 1092-1:2018 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
| EN 378-2:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
| DIN EN 14071:2015-08 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT |
| 17/30351221 DC : 0 | BS EN 14276-2 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| DIN EN 13135:2013-05 | CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT |
| BS EN 13480-2:2017+A3:2018 | Metallic industrial piping Materials |
| UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| BS EN 13480-4:2017 | Metallic industrial piping Fabrication and installation |
| BS EN 14276-2 : 2007 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| UNE-EN 1515-4:2010 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| BS EN 12952-14:2004 | Water-tube boilers and auxiliary installations Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution |
| BS EN 12952-9:2002 | Water-tube boilers and auxiliary installations Requirements for firing systems for pulverized solid fuels for the boiler |
| UNE-EN 13480-4:2017 | Metallic industrial piping - Part 4: Fabrication and installation |
| ISO 10535:2006 | Hoists for the transfer of disabled persons Requirements and test methods |
| UNE-EN 14125:2013 | Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
| I.S. EN 14276-2:2007 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
| UNE-EN 1591-1:2014 | Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation |
| BS EN 378-2:2016 | Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation |
| BS EN 14125:2013 | Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
| EN 14276-2:2007+A1:2011 | Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements |
| BS EN 13941 : 2009 | DESIGN AND INSTALLATION OF PREINSULATED BONDED PIPE SYSTEMS FOR DISTRICT HEATING |
| UNE-EN 12952-3:2012 | Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler |
| EN 1515-4:2009 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| EN 14656:2006+A1:2010 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals |
| EN 15061:2007+A1:2008 | Safety of machinery - Safety requirements for strip processing line machinery and equipment |
| EN 746-2:2010 | Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
| EN ISO 28721-4:2015 | Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings (ISO 28721-4:2015) |
| EN 15949:2012 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
| EN 13941:2009+A1:2010 | Design and installation of preinsulated bonded pipe systems for district heating |
| EN 14125:2013 | Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
| EN 15711:2009 | Vitreous and porcelain enamels - Glass lined flanged steel pipes and flanged steel fittings - Quality requirements |
| EN 14673:2006+A1:2010 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals |
| EN 1591-1:2013 | Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation |
| EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
| PREN 10253-2 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| DIN EN 15711 E : 2009 | VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS |
| I.S. EN ISO 28721-4:2015 | VITREOUS AND PORCELAIN ENAMELS - GLASS-LINED APPARATUS FOR PROCESS PLANTS - PART 4: QUALITY REQUIREMENTS FOR GLASS-LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS (ISO 28721-4:2015) |
| 07/30140820 DC : 0 | BS ISO 25457 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE |
| CEN/TR 14585-3:2017 | Corrugated metal hose assemblies for pressure applications - Part 3: Design method |
| 15/30317351 DC : 0 | BS EN 13480-8:2012/A2 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
| 12/30260512 DC : 0 | BS EN ISO 28721-4 - VITREOUS AND PORCELAIN ENAMELS - GLASS-LINED APPARATUS FOR PROCESS PLANTS - PART 4: QUALITY REQUIREMENTS FOR GLASS-LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS |
| DIN EN 1515-4:2010-04 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| 11/30246681 DC : 0 | BS EN 13480-5 - METALLIC INDUSTRIAL PIPING - PART 5: INSPECTION AND TESTING |
| I.S. EN 10253-4:2008 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| UNE-EN 14917:2011 | Metal bellows expansion joints for pressure applications |
| UNE-EN 13480-1:2017 | Metallic industrial piping - Part 1: General |
| DIN EN 12952-3:2012-03 | Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler |
| I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| DIN EN 14678-1:2013-06 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| DIN EN ISO 10535:2007-04 | Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006) |
| DIN EN 14125:2013-09 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| BS EN 14656 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| ISO 28721-4:2015 | Vitreous and porcelain enamels Glass-lined apparatus for process plants Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings |
| BS EN 14678-1:2013 | LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers |
| BS EN 12952-3:2011 | Water-tube boilers and auxiliary installations Design and calculation for pressure parts of the boiler |
| ONORM EN 10253-2 : 2008 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| EN ISO 10535:2006 | Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006) |
| UNE-EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
| EN 13480-2:2017 | Metallic industrial piping - Part 2: Materials |
| KTA 3205.3 : 2006(R2011) | COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 3: SERIES-PRODUCTION STANDARD SUPPORTS |
| EN ISO 5817:2014 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
| ISO 15348:2002 | Pipework Metal bellows expansion joints General |
| EN 1591-1:2013 | Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation |
| EN 13480-4:2017 | Metallic industrial piping - Part 4: Fabrication and installation |
| EN 14917:2009+A1:2012 | Metal bellows expansion joints for pressure applications |
| EN 12952-3:2011 | Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler |
| EN 13480-1:2017 | Metallic industrial piping - Part 1: General |
| EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| EN 1515-2:2001 | Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated |
| EN 1515-4:2009 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| 2014/68/EU : 2014 COR 1 2015 | DIRECTIVE 2014/68/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 MAY 2014 ON THE HARMONISATION OF THE LAWS OF THE MEMBER STATES RELATING TO THE MAKING AVAILABLE ON THE MARKET OF PRESSURE EQUIPMENT TEXT WITH EEA RELEVANCE |
| EN 1591-2:2008 | Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters |
| EN 764-2:2012 | Pressure equipment - Part 2: Quantities, symbols and units |
| EN 1515-3:2005 | Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated |
| EN 13480-5:2017 | Metallic industrial piping - Part 5: Inspection and testing |
| EN 13555:2014 | Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.