EN 12591:2009
Current
Current
The latest, up-to-date edition.
Bitumen and bituminous binders - Specifications for paving grade bitumens
Published date
15-04-2009
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Sampling
5 Requirements and test methods
6 Evaluation of conformity
Annex A (normative) - Calculation of the penetration
index, I[p]
Annex B (informative) - Complementary information on grade
selection
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the
EU Construction Products Directive
Bibliography
This European Standard provides a framework for specifying a range of properties and relevant test methods for bitumens, which are suitable for use in the construction and maintenance of roads, airfields and other paved areas, together with requirements for evaluation of conformity.This European Standard does not directly address ‘cohesion, adhesion and setting ability’ (see Introduction).NOTEAlthough industrial bitumens are specified according to EN 13305, it should be underlined that paving grade bitumens, specified according to this European Standard, can also be used for industrial applications.
| Committee |
CEN/TC 336
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 12591:2009-08 | Identical |
| NF EN 12591 : 2009 | Identical |
| NEN EN 12591 : 2009 | Identical |
| UNI EN 12591 : 2009 | Identical |
| SN 670202-NA : 2009 | Identical |
| UNE-EN 12591:2009 | Identical |
| BS EN 12591:2009 | Identical |
| SN EN 12591 : 2009 | Identical |
| NS EN 12591 : 2009 + NA 2011 | Identical |
| NBN EN 12591 : 2009 | Identical |
| I.S. EN 12591:2009 | Identical |
| PN EN 12591 : 2010 | Identical |
| BS EN 12697-30:2012 | Bituminous mixtures. Test methods for hot mix asphalt Specimen preparation by impact compactor |
| 13/30278708 DC : 0 | BS EN 13108-1 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
| 13/30278735 DC : 0 | BS EN 13108-20 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
| I.S. EN 12607-1:2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| I.S. EN 12271:2006 | SURFACE DRESSING - REQUIREMENTS |
| 00/100955 DC : DRAFT MAR 2000 | BS EN 13108-6 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 6: MASTIC ASPHALT |
| 13/30278717 DC : 0 | BS EN 13108-5 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
| PREN 13108-5 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
| 13/30278729 DC : 0 | BS EN 13108-3 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 3: SOFT ASPHALT |
| 10/30086524 DC : 0 | BS ISO 10844 - ACOUSTICS - SPECIFICATION OF TEST TRACKS FOR THE PURPOSE OF MEASURING NOISE EMITTED BY ROAD VEHICLES |
| DIN EN 15381:2008-11 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS |
| 13/30278711 DC : 0 | BS EN 13108-4 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
| 13/30278723 DC : 0 | BS EN 13108-2 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: VERY THIN LAYER ASPHALT CONCRETE (BBTM) |
| DIN EN 12697-30:2012-06 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 30: SPECIMEN PREPARATION BY IMPACT COMPACTOR |
| PREN 13108-20 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
| PREN 12607-1 : DRAFT 2013 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| BS EN 12697-31:2007 | Bituminous mixtures. Test methods for hot mix asphalt Specimen preparation by gyratory compactor |
| I.S. EN 15381:2008 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS |
| EN 13375:2004 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Specimen preparation |
| UNE-EN 13179-1:2013 | Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test |
| BS EN 13108-3:2016 | Bituminous mixtures. Material specifications Soft Asphalt |
| EN 12697-35:2016 | Bituminous mixtures - Test methods - Part 35: Laboratory mixing |
| EN 13179-1:2013 | Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test |
| EN 12607-1:2014 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method |
| EN 12271:2006 | Surface dressing - Requirements |
| EN 13108-2:2016 | Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM) |
| EN 13108-7:2016 | Bituminous mixtures - Material specifications - Part 7: Porous Asphalt |
| EN 13108-20:2016 | Bituminous mixtures - Material specifications - Part 20: Type Testing |
| 11/30250572 DC : 0 | BS EN 15322 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| DIN EN 15322:2013-07 | Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders |
| PREN 13108-3 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 3: SOFT ASPHALT |
| PREN 12697-35 : DRAFT 2014 | BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING |
| 07/30170907 DC : DRAFT AUG 2007 | BS EN 15322 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| PREN 13108-7 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 7: POROUS ASPHALT |
| 13/30278705 DC : 0 | BS EN 13108-9 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 9: ASPHALT FOR ULTRA-THIN-LAYERS (AUTL) |
| 11/30247867 DC : 0 | BS EN 13924-2 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL BITUMEN - PART 2: MULTIGRADE BITUMENOUS BINDERS |
| 13/30278726 DC : 0 | BS EN 13108-7 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 7: POROUS ASPHALT |
| BS EN 13924-1:2015 | Bitumen and bituminous binders. Specification framework for special paving grade bitumen Hard paving grade bitumens |
| PREN 13108-2 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: VERY THIN LAYER ASPHALT CONCRETE (BBTM) |
| 97/109845 DC : DRAFT DEC 1997 | BS EN 13108-10 - BITUMINOUS MIXTURES - QUALITY - PART 10: FACTORY PRODUCTION CONTROL |
| PREN 12697-31 : DRAFT 2014 | BITUMINOUS MIXTURES - TEST METHODS - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR |
| PREN 13108-1 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
| I.S. EN 13108-4:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
| BS ISO 10844:2014 | Acoustics. Specification of test tracks for measuring noise emitted by road vehicles and their tyres |
| BS EN 13375:2004 | Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Specimen preparation |
| UNI EN 12697-30 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 30: SPECIMEN PREPARATION BY IMPACT COMPACTOR |
| BS EN 13108-5:2016 | Bituminous mixtures. Material specifications Stone Mastic Asphalt |
| I.S. EN 14023:2010 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS |
| I.S. EN 13108-7:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 7: POROUS ASPHALT |
| I.S. EN 13179-1:2013 | TESTS FOR FILLER AGGREGATE USED IN BITUMINOUS MIXTURES - PART 1: DELTA RING AND BALL TEST |
| I.S. EN 13108-2:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: ASPHALT CONCRETE FOR VERY THIN LAYERS (BBTM) |
| DIN EN 13375:2004-12 | FLEXIBLE SHEETS FOR WATERPROOFING - WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER CONCRETE SURFACES TRAFFICABLE BY VEHICLES - SPECIMEN PREPARATION |
| I.S. EN 13108-20:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 20: TYPE TESTING |
| I.S. EN 13108-5:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT |
| DIN EN 12697-31:2007-06 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR |
| I.S. EN 13808:2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CATIONIC BITUMINOUS EMULSIONS |
| I.S. EN 13108-6:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 6: MASTIC ASPHALT |
| I.S. EN 13108-1:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 1: ASPHALT CONCRETE |
| I.S. EN 13108-3:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 3: SOFT ASPHALT |
| I.S. EN 12697-35:2016 | BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING |
| 13/30255328 DC : 0 | BS EN 12607-1 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER THE INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| I.S. EN 15322:2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| DIN EN 13924-1:2016-02 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
| PREN 13108-4 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 4: HOT ROLLED ASPHALT |
| BS EN 15322:2013 | Bitumen and bituminous binders. Framework for specifying cut-back and fluxed bituminous binders |
| 02/104837 DC : 0 | PREN 12271-10 - SURFACE DRESSING - SPECIFICATIONS - PART 10: FACTORY PRODUCTION CONTROL |
| PREN 15322 : DRAFT 2011 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| I.S. EN 13108-9:2016 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 9: ASPHALT FOR ULTRA-THIN LAYER (AUTL) |
| I.S. EN 13375:2004 | FLEXIBLE SHEETS FOR WATERPROOFING - WATERPROOFING OF CONCRETE BRIDGE DECKS AND OTHER CONCRETE SURFACES TRAFFICABLE BY VEHICLES - SPECIMEN PREPARATION |
| ISO 10844:2014 | Acoustics Specification of test tracks for measuring noise emitted by road vehicles and their tyres |
| I.S. EN 12697-31:2007 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR |
| 14/30310358 DC : 0 | BS EN 12697-31 - BITUMINOUS MIXTURES - TEST METHODS - PART 31: SPECIMEN PREPARATION BY GYRATORY COMPACTOR |
| UNE-EN 15381:2008 | Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays |
| UNE-EN 12697-30:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation by impact compactor |
| EN 13108-1:2016 | Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete |
| DIN EN 12271:2007-03 | Surface dressing - Requirements |
| DIN EN 13808:2013-07 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CATIONIC BITUMINOUS EMULSIONS |
| BS EN 13108-2:2016 | Bituminous mixtures. Material specifications Asphalt Concrete for Very Thin Layers (BBTM) |
| UNE-EN 12697-35:2017 | Bituminous mixtures - Test methods - Part 35: Laboratory mixing |
| BS EN 12271:2006 | Surface dressing. Requirements |
| EN 13808:2013 | Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions |
| UNI EN 13808 : 2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CATIONIC BITUMINOUS EMULSIONS |
| UNI EN 13179-1 : 2013 | TESTS FOR FILLER AGGREGATE USED IN BITUMINOUS MIXTURES - PART 1: DELTA RING AND BALL TEST |
| UNI EN 14023 : 2010 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR POLYMER MODIFIED BITUMENS |
| UNI EN 12607-1 : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| UNI EN 15322 : 2013 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| UNI EN 15381 : 2008 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN PAVEMENTS AND ASPHALT OVERLAYS |
| PREN 13108-6 : DRAFT 2013 | BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 6: MASTIC ASPHALT |
| 04/30117724 DC : DRAFT AUG 2004 | EN 14023 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK SPECIFICATION FOR POLYMER MODIFIED BITUMENS |
| BS EN 13108-9:2016 | Bituminous mixtures. Material specifications Asphalt for Ultra-Thin Layer (AUTL) |
| 13/30278720 DC : 0 | BS EN 13108-6 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 6: MASTIC ASPHALT |
| 02/104379 DC : 0 | PREN 12271-11 - SURFACE DRESSING - SPECIFICATIONS - PART 11: TYPE APPROVAL INSTALLATION TRIAL (TAIT) |
| EN 12697-30:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation by impact compactor |
| DIN EN 14023:2013-04 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| DIN EN 12607-1:2015-01 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| BS EN 14023:2010 | Bitumen and bituminous binders. Specification framework for polymer modified bitumens |
| BS EN 13108-7:2016 | Bituminous mixtures. Material specifications Porous Asphalt |
| UNE-EN 12607-1:2015 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method |
| BS EN 12607-1:2014 | Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air RTFOT method |
| BS EN 12697-35:2004 | Bituminous mixtures. Test methods for hot mix asphalt Laboratory mixing |
| BS EN 13880-11:2003 | Hot applied joint sealants Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements |
| BS EN 12970:2000 | Mastic asphalt for waterproofing. Definitions, requirements and test methods |
| BS EN 1931:2000 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of water vapour transmission properties |
| BS EN 13108-1:2016 | Bituminous mixtures. Material specifications Asphalt Concrete |
| BS EN 13108-20:2016 | Bituminous mixtures. Material specifications Type Testing |
| UNE-EN 13808:2013 | Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions |
| EN 14023:2010 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| EN 15381:2008 | Geotextiles and geotextile-related products - Characteristics required for use in pavements and asphalt overlays |
| EN 13924-1:2015 | Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens |
| EN 13880-11:2003 | Hot applied joint sealants - Part 11: Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements |
| EN 15322:2013 | Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders |
| I.S. EN 13924:2006 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
| 11/30250578 DC : 0 | BS EN 13808 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CATIONIC BITUMINOUS EMULSIONS |
| 14/30310361 DC : 0 | BS EN 12697-35 - BITUMINOUS MIXTURES - TEST METHODS - PART 35: LABORATORY MIXING |
| 05/30138350 DC : DRAFT AUG 2005 | EN 15322 - BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUTBACK AND FLUXED BITUMINOUS BINDERS |
| DIN ISO 10844:2016-09 | Acoustics - Specification of test tracks for measuring noise emitted by road vehicles and their tyres (ISO 10844:2014) |
| 13/30255316 DC : 0 | BS EN 13924-1 - BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
| BS EN 15381:2008 | Geotextiles and geotextile-related products. Characteristics required for use in pavements and asphalt overlays |
| 02/103376 DC : DRAFT MAY 2002 | PREN 13108-2 - BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 2: ASPHALT CONCRETE FOR VERY THIN LAYERS |
| BS 2000-460-1(2014) : 2014 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE RESISTANCE TO HARDENING UNDER INFLUENCE OF HEAT AND AIR - PART 1: RTFOT METHOD |
| I.S. EN 12697-30:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 30: SPECIMEN PREPARATION BY IMPACT COMPACTOR |
| I.S. EN 13924-1:2015 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATION FRAMEWORK FOR SPECIAL PAVING GRADE BITUMEN - PART 1: HARD PAVING GRADE BITUMENS |
| UNE-EN 15322:2014 | Bitumen and bituminous binders - Framework for specifying cut-back and fluxed bituminous binders |
| EN 12697-31:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor |
| BS EN 13108-6:2016 | Bituminous mixtures. Material specifications Mastic Asphalt |
| BS EN 13108-4:2016 | Bituminous mixtures. Material specifications Hot Rolled Asphalt |
| BS EN 13924:2006 | Bitumen and bituminous binders. Specifications for hard paving grade bitumens |
| BS EN 13179-1:2013 | Tests for filler aggregate used in bituminous mixtures Delta ring and ball test |
| EN 13108-6:2016 | Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt |
| EN 13108-3:2016 | Bituminous mixtures - Material specifications - Part 3: Soft Asphalt |
| EN 12970:2000 | Mastic asphalt for waterproofing - Definitions, requirements and test methods |
| EN 13108-5:2016 | Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt |
| DIN EN 13924:2006-07 | BITUMEN AND BITUMINOUS BINDERS - SPECIFICATIONS FOR HARD PAVING GRADE BITUMENS |
| EN 13108-9:2016 | Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL) |
| EN 12592:2014 | Bitumen and bituminous binders - Determination of solubility |
| EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| EN 12697-12:2008 | Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens |
| EN 12697-1 : 2012 COR 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| PREN 15322 : DRAFT 2011 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| EN 13108-5:2016 | Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt |
| EN 12596:2014 | Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary |
| EN 12697-11:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 15326:2007+A1:2009 | Bitumen and bituminous binders - Measurement of density and specific gravity - Capillary-stoppered pyknometer method |
| EN 13808:2013 | Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions |
| EN 12597:2014 | Bitumen and bituminous binders - Terminology |
| EN 12697-26:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness |
| EN 13304:2009 | Bitumen and bituminous binders - Framework for specification of oxidised bitumens |
| EN 13108-1:2016 | Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete |
| EN 12607-2:2014 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 2: TFOT method |
| EN 13108-7:2016 | Bituminous mixtures - Material specifications - Part 7: Porous Asphalt |
| EN 58:2012 | Bitumen and bituminous binders - Sampling bituminous binders |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 13108-3:2016 | Bituminous mixtures - Material specifications - Part 3: Soft Asphalt |
| EN 13305:2009 | Bitumen and bituminous binders - Framework for specification of hard industrial bitumens |
| ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
| EN 12594:2014 | Bitumen and bituminous binders - Preparation of test samples |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| EN 13108-6:2016 | Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt |
| EN 12607-1:2014 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method |
| EN 14023:2010 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| EN 12593:2015 | Bitumen and bituminous binders - Determination of the Fraass breaking point |
| EN ISO 2592:2017 | Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
| EN 13108-2:2016 | Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM) |
| EN ISO 4259:2006 | Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006) |
| EN 12595:2014 | Bitumen and bituminous binders - Determination of kinematic viscosity |
| CEN/TR 15352:2006 | Bitumen and bituminous binders - Development of performance-related specifications: status report 2005 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.