EN 1254-2:1998
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes
Superseded date
05-06-2021
Superseded by
Published date
21-01-1998
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Definitions
3.1 plumbing fitting
3.2 compression end
3.3 reducer (compression end for copper tube)
3.4 adaptor fitting
3.5 nominal diameter
4 Requirements
4.1 General
4.2 Materials
4.3 Dimensions and tolerances
4.4 Design and manufacture
4.5 Production test requirements
4.6 Type test requirements
5 Test methods
5.1 Sampling procedure
5.2 Preparation of fittings for testing
5.3 Test sequence
5.4 Leaktightness under internal hydrostatic pressure
5.5 Resistance to pull-out
5.6 Leaktightness under internal hydrostatic pressure
whilst subjected to bending
5.7 Pressure test
5.8 Dezincification resistance test
5.9 Stress corrosion resistance test
6 Designation
7 Marking
7.1 General
7.2 Dezincification resistant copper-zinc alloys
8 Documentation
8.1 Declaration of conformity
8.2 User instructions
Annex A (normative) Determination of mean depth of
dezincification
Annex B (informative) Bibliography
This European standard specifies materials, assembly dimensions and tolerances and test requirements for fittings of copper and copper alloys with or without plating or coating. Maximum permissible temperatures and pressures are also established. This part of prEN 1254 specifies connection end dimensions of compression ends for the purposes of joing copper tubes specified in EN 1057. Fittings may comprise a combination of any of the end types specified in prEN 1254-1 to prEN 1254-5 or other standards. The standard establishes a designation system for the fittings.
| Committee |
CEN/TC 133
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ONORM EN 1254-2 : 1998 | Identical |
| SN EN 1254-2 : 1998 | Identical |
| NS EN 1254-2 : 1ED 1998 | Identical |
| NEN EN 1254-2 : 1998 | Identical |
| NF EN 1254-2 : 1998 | Identical |
| BS EN 1254-2:1998 | Identical |
| UNI EN 1254-2 : 2000 | Identical |
| UNE-EN 1254-2:1999 | Identical |
| NBN EN 1254-2 : 1998 | Identical |
| PN EN 1254-2 : 2004 | Identical |
| I.S. EN 1254-2:1998 | Identical |
| DIN EN 1254-2:1998-03 | Identical |
| BS EN 16146 : 2012 | SANITARY TAPWARE - EXTRACTABLE SHOWER HOSES FOR SANITARY TAPWARE FOR SUPPLY SYSTEMS TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION |
| 13/30279702 DC : 0 | BS EN 331 - MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| 12/30259203 DC : 0 | BS EN 12007-5 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 5: SERVICE LINES, SPECIFIC FUNCTIONAL REQUIREMENTS |
| 10/30227098 DC : 0 | BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| 03/118276 DC : DRAFT NOV 2003 | BS EN 14812-1 - WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE AND SAFETY TESTING - PART 1: PRE-SET DOSING SYSTEMS |
| DIN CEN/TS 13547:2007-02 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| 04/30126822 DC : 0 | EN 15092 - BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS |
| 00/107336 DC : DRAFT OCT 2000 | PREN 13959 - ANTI-POLLUTION CHECK VALVES DN 6 TO DN 250 INCLUSIVE - FAMILY E, TYPE A, B, C AND D |
| UNE-EN 13547:2014 | Industrial valves - Copper alloy ball valves |
| DD CEN/TS 13547:2006 | Industrial valves. Copper alloy ball valves |
| I.S. EN 1254-1:1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 1: FITTINGS WITH ENDS FOR CAPILLARY SOLDERING OR CAPILLARY BRAZING TO COPPER TUBES |
| I.S. EN 1254-3:1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 3: FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES |
| PREN 13618 : DRAFT 2009 | FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 13547:2013 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| DIN EN ISO 23553-1:2014-09 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014 |
| DIN EN 1254-1:1998-03 | Copper and copper alloy plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| BS EN 1490:2000 | Building valves. Combined temperature and pressure relief valves. Tests and requirements |
| BS EN 13828:2003 | Building valves. Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings. Tests and requirements |
| BS EN 817:2008 | Sanitary tapware. Mechanical mixing valves (PN 10). General technical specifications |
| BS EN 12288:2010 | Industrial valves. Copper alloy gate valves |
| UNE-EN 331:2016 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| BS EN 1567 : 2000 | BUILDING VALVES - WATER PRESSURE REDUCING VALVES AND COMBINATION WATER REDUCING VALVES - REQUIREMENTS AND TESTS |
| BS EN 1489:2000 | Building valves. Pressure safety valves. Tests and requirements |
| I.S. EN 14812:2005 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| I.S. EN 12288:2010 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| DIN EN 200:2008-10 | Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification; German version EN 200:2008 |
| DIN EN 13828:2003-12 | BUILDING VALVES - MANUALLY OPERATED COPPER ALLOY AND STAINLESS STEEL BALL VALVES FOR POTABLE WATER SUPPLY IN BUILDINGS - TESTS AND REQUIREMENTS |
| EN 12288:2010 | Industrial valves - Copper alloy gate valves |
| EN 13443-1:2002+A1:2007 | Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing |
| EN 1286:1999 | Sanitary tapware - Low pressure mechanical mixing valves - General technical specification |
| EN 13547:2013 | Industrial valves - Copper alloy ball valves |
| UNI EN 1949 : 2013 | SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES |
| CEN/TS 13547:2006 | Industrial valves - Copper alloy ball valves |
| 09/30202316 DC : 0 | BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
| DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| 07/30163621 DC : 0 | BS EN 1254-5 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 5: FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES |
| DIN EN 16145:2013-03 | Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification |
| EN 1488:2000 | Building valves - Expansion groups - Tests and requirements |
| 99/707487 DC : DRAFT JUN 1999 | PREN 13547 - INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| I.S. EN 1254-4:1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS |
| PREN 12309-2 : DRAFT 2013 | GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY |
| I.S. EN 16145:2012 | SANITARY TAPWARE - EXTRACTABLE OUTLETS FOR SINK AND BASIN MIXERS - GENERAL TECHNICAL SPECIFICATION |
| UNI EN 16145 : 2013 | SANITARY TAPWARE - EXTRACTABLE OUTLETS FOR SINK AND BASIN MIXERS - GENERAL TECHNICAL SPECIFICATION |
| DIN EN 12288:2010-10 | Industrial valves - Copper alloy gate valves |
| DIN EN 14868:2005-11 | PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS |
| BS EN 1254-3:1998 | Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with plastics pipes |
| BS EN 14812 : 2005 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| BS EN 13443-1:2002 | Water conditioning equipment inside buildings. Mechanical filters Particle rating 80 μm to 150 μm. Requirements for performances, safety and testing |
| BS EN 1254-4:1998 | Copper and copper alloys. Plumbing fittings Fittings combining other end connections with capillary or compression ends |
| I.S. EN 1949:2011 | SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES (INCLUDING IRISH NATIONAL ANNEX) |
| DIN EN 1775:2007-10 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
| I.S. EN 817:2008 | SANITARY TAPWARE - MECHANICAL MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATIONS |
| I.S. EN 331:2015 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| I.S. EN 200:2008 | SANITARY TAPWARE - SINGLE TAPS AND COMBINATION TAPS FOR WATER SUPPLY SYSTEMS OF TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION |
| I.S. EN 12309-2:2015 | GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY |
| I.S. EN 13443-1:2002 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 MICROMETER TO 150 MICROMETER - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING |
| I.S. EN 1775:2007 | GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS |
| BS EN 15092:2008 | Building valves. Inline hot water supply tempering valves. Tests and requirements |
| PREN 13547 : DRAFT 1999 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| 07/30163615 DC : 0 | BS EN 1254-1 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 1: FITTINGS WITH ENDS FOR CAPILLARY SOLDERING OR CAPILLARY BRAZING TO COPPER TUBES |
| UNE-EN ISO 10239:2017 | Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014) |
| I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| 07/19990369 DC : 0 | BS EN 806-4 - SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4 - INSTALLATION |
| BS EN ISO 10239:2017 | Small craft. Liquefied petroleum gas (LPG) systems |
| I.S. EN 15092:2008 | BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS |
| UNI EN 806-4 : 2010 | SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION |
| BS EN 13618:2016 | Flexible hose assemblies in drinking water installations. Functional requirements and test methods |
| BS EN 806-4:2010 | Specifications for installations inside buildings conveying water for human consumption Installation |
| 09/30205880 DC : DRAFT OCT 2009 | BS EN 12288 - INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| EN 1254-3:1998 | Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
| NF EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| 07/30144895 DC : 0 | BS EN 723 - COPPER AND COPPER ALLOYS - COMBUSTION METHOD FOR DETERMINATION OF CARBON CONTENT ON THE INNER SURFACE OF COPPER TUBES OR FITTINGS |
| I.S. EN 1254-5:1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 5: FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES |
| NF EN 806-4 : 2010 | SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION |
| UNI EN 13547 : 2013 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| I.S. CEN TS 13547:2006 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| I.S. EN ISO 10239:2017 | SMALL CRAFT - LIQUEFIED PETROLEUM GAS (LPG) SYSTEMS (ISO 10239:2014) |
| DIN EN 13443-1:2007-12 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 [MU]M TO 150 [MU]M - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING |
| DIN EN 1949:2013-05 | Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles (includes Amendment A1:2013) |
| DIN EN 817:2008-09 | SANITARY TAPWARE - MECHANICAL MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATIONS |
| DIN EN 331:2016-04 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| UNE-EN 1949:2011 | Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles |
| UNE-EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
| UNE-EN 16125:2016 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
| I.S. EN 1491:2000 | BUILDING VALVES - EXPANSION VALVES - TESTS AND REQUIREMENTS |
| UNI EN 12288 : 2010 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| UNI EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| UNI EN 1775 : 2007 | GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS |
| UNI EN 817 : 2008 | SANITARY TAPWARE - MECHANICAL MIXING VALVES (PN 10) - GENERAL TECHNICAL SPECIFICATIONS |
| UNI EN ISO 23553-1 : 2014 | SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES |
| UNI EN 200 : 2008 | SANITARY TAPWARE - SINGLE TAPS AND COMBINATION TAPS FOR WATER SUPPLY SYSTEMS OF TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION |
| DIN EN 13547:2013-12 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| BS EN 16145:2012 | Sanitary tapware. Extractable outlets for sink and basin mixers. General technical specification |
| BS EN 13547:2013 | Industrial valves. Copper alloy ball valves |
| I.S. EN 1488:2000 | BUILDING VALVES - EXPANSION GROUPS - TESTS AND REQUIREMENTS |
| DIN EN 806-4:2010-06 | Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation |
| 13/30261510 DC : 0 | BS EN ISO 10239 - SMALL CRAFT - LIQUEFIED PETROLEUM GAS (LPG) SYSTEMS |
| 13/30276940 DC : 0 | BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| DIN EN 16146:2015-02 | Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification; German version EN 16146:2012+A1:2014 |
| DIN EN 16125:2016-03 | LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| UNE-EN 13618:2017 | Flexible hose assemblies in drinking water installations - Functional requirements and test methods |
| I.S. EN 16125:2015 | LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| I.S. EN 16146:2012 | SANITARY TAPWARE - EXTRACTABLE SHOWER HOSES FOR SANITARY TAPWARE FOR SUPPLY SYSTEMS TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION |
| I.S. EN ISO 23553-1:2014 | SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014) |
| PREN 331 : DRAFT 2013 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| PREN 12288 : DRAFT 2009 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| ISO 10239:2014 | Small craft Liquefied petroleum gas (LPG) systems |
| BS EN 16125:2015 | LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase |
| 16/30337101 DC : 0 | BS EN 16436-2 - RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 2: ASSEMBLIES |
| I.S. EN 806-4:2010 | SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION |
| I.S. EN 13618:2016 | FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| BS EN 1949:2011+A1:2013 | Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles |
| BS EN 14868:2005 | Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in closed water circulation systems |
| BS EN 1254-5:1998 | Copper and copper alloys. Plumbing fittings Fittings with short ends for capillary brazing to copper tubes |
| BS EN 1488:2000 | Building valves. Expansion groups. Tests and requirements |
| UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| BS EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves |
| BS EN 13959:2004 | Anti-pollution check valves. DN 6 to DN 250 inclusive Family E, type A, B, C, and D |
| ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
| 12/30250105 DC : 0 | BS ISO 23553-1 - SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO/DIS 23553-1:2012) |
| BS EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| DIN EN 12309-2:2016-04 | GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY |
| BS EN 1213:2000 | Building valves. Copper alloy stopvalves for potable water supply in buildings. Tests and requirements |
| BS EN 806-2:2005 | Specifications for installations inside buildings conveying water for human consumption Design |
| UNE-EN 12309-2:2015 | Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 2: Safety |
| EN 15092:2008 | Building valves - Inline hot water supply tempering valves - Tests and requirements |
| EN 1775:2007 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
| EN 14812:2005+A1:2007 | Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing |
| EN ISO 10239:2017 | Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014) |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| EN 13828:2003 | Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings -Tests and requirements |
| EN 1489:2000 | Building valves - Pressure safety valves - Tests and requirements |
| EN 14868:2005 | Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems |
| EN 806-2:2005 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| EN 13618:2016 | Flexible hose assemblies in drinking water installations - Functional requirements and test methods |
| EN 1567:1999 | Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests |
| EN 16125:2015 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
| EN 1491:2000 | Building valves - Expansion valves - Tests and requirements |
| EN 1490:2000 | Building valves - Combined temperature and pressure relief valves - Tests and requirements |
| EN 806-4:2010 | Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation |
| EN 200:2008 | Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification |
| EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
| EN 13959:2004 | Anti-pollution check valves - DN 6 to DN 250 inclusive family E, type A, B, C and D |
| EN 817:2008 | Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications |
| EN 16146:2012+A1:2014 | Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification |
| EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| DIN EN 13618:2016-05 (Draft) | FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| DIN EN 15092:2008-09 | BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS |
| DIN EN ISO 10239:2015-05 | SMALL CRAFT - LIQUEFIED PETROLEUM GAS (LPG) SYSTEMS (ISO 10239:2014) |
| 09/30198696 DC : 0 | BS EN 13618 - FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| EN 1254-1:1998 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
| UNI EN 15092 : 2008 | BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS |
| EN 1254-5:1998 | Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
| 13/30278752 DC : 0 | BS EN 12309-2 - GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY |
| 04/30114458 DC : 0 | EN 14905 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - RECOMMENDED PRACTICE FOR THE INSTALLATION OF COPPER AND COPPER ALLOY PLUMBING FITTINGS |
| 03/118682 DC : DRAFT JAN 2004 | PREN 14868 - PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - CORROSION LIKELIHOOD IN WATER RECIRCULATION SYSTEMS |
| 07/30168416 DC : 0 | BS EN 1264-4 - WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION |
| UNI EN 806-2 : 2008 | SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 2: DESIGN |
| UNE-EN 16145:2014 | Sanitary tapware - Extractable outlets for sink and basin mixers - General technical specification |
| UNI EN 16146 : 2014 | SANITARY TAPWARE - EXTRACTABLE SHOWER HOSES FOR SANITARY TAPWARE FOR SUPPLY SYSTEMS TYPE 1 AND TYPE 2 - GENERAL TECHNICAL SPECIFICATION |
| BS EN 1949 : 2011 | SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES |
| DIN EN 1254-4:1998-03 | Copper and copper alloy plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends |
| DIN EN 806-2:2005-06 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| BS EN 1775:2007 | Gas supply. Gas pipework for buildings. Maximum operating pressure less than or equal to 5 bar. Functional recommendations |
| BS EN 200:2008 | Sanitary tapware. Single taps and combination taps for water supply systems of type 1 and type 2. General technical specification |
| BS EN 12309-2:2015 | Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Safety |
| BS EN 1254-1:1998 | Copper and copper alloys. Plumbing fittings Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| BS EN 1491:2000 | Building valves. Expansion valves. Tests and requirements |
| BS EN 1286:1999 | Sanitary tapware. Low pressure mechanical mixing valves. General technical specification |
| DIN EN 14812:2007-09 | WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING |
| EN 1213:1999 | Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements |
| DIN EN 13959:2005-01 | Anti-pollution check valves - DN 6 to DN 250 inclusive - Family E, type A, B, C and D; German version EN 13959:2004 |
| DIN EN 13618:2017-03 | FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| EN 1949:2011+A1:2013 | Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles |
| UNE-EN 16146:2013 | Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 - General technical specification |
| UNE-EN 16125:2020 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
| ONORM EN 200 : 2008 | SANITARY TAPWARE - SINGLE TAPS AND COMBINATION TAPS (PN 10) - GENERAL TECHNICAL SPECIFICATION |
| EN 1254-3:1998 | Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
| EN 1254-5:1998 | Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| EN 1254-1:1998 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| EN ISO 9002:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
| ISO 9002:1994 | Quality systems — Model for quality assurance in production, installation and servicing |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 6509:1981 | Corrosion of metals and alloys Determination of dezincification resistance of brass |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 12164:2016 | Copper and copper alloys - Rod for free machining purposes |
| EN ISO 6509:1995 | Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981) |
| PREN 12449 : DRAFT 2011 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| ISO 6957:1988 | Copper alloys Ammonia test for stress corrosion resistance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.