Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 1253-1:2015

Current

Current

The latest, up-to-date edition.

Gullies for buildings - Part 1: Trapped floor gullies with a depth water seal of at least 50 mm

Published date

21-01-2015

Sorry this product is not available in your region.

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Allocation and sequence of tests
7 Marking
8 Evaluation of conformity
Annex A (normative) - Sequence of the tests
Annex B (informative) - A-deviation
Bibliography

This European Standard classifies floor gullies for use inside buildings, gives guidance for places of installation and specifies requirements for the construction, design, performance and marking of factory made gullies for buildings, irrespective of the material, for use in drainage systems requiring a trap with a depth of water seal of at least 50 mm (further: floor gullies).Although normally used to convey domestic wastewater, these floor gullies may convey other wastewater, e.g. industrial wastewater, provided there is no risk of damage to components or of injury to health.This European Standard does not apply to:-linear drainage channels as specified in EN 1433,-gully tops and manhole tops which are specified in EN 124,-roof drains and floor gullies without trap as specified in EN 1253 2.

Committee
CEN/TC 165
DevelopmentNote
Supersedes PREN 1253-1. (02/2015)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

Standards Relationship
UNI EN 1253-1:2015 Identical
SN EN 1253-1 : 2015 Identical
NF EN 1253-1 : 2015 Identical
DIN EN 1253-1:2015-03 Identical
UNE-EN 1253-1:2015 Identical
NS EN 1253-1 : 2015 Identical
BS EN 1253-1:2015 Identical
I.S. EN 1253-1:2015 Identical
UNI EN 1253-1 : 2004 Identical
NBN EN 1253-1 : 2015 Identical
PN EN 1253-1 : 2015 Identical
NEN EN 1253-1 : 2015 Identical

PREN 1253-5 : DRAFT 2015 GULLIES FOR BUILDINGS - PART 5: GULLIES WITH LIGHT LIQUIDS CLOSURE
15/30326961 DC : 0 BS EN 62561-5 ED. 2 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 5: REQUIREMENTS FOR EARTH ELECTRODE INSPECTION HOUSINGS AND EARTH ELECTRODE SEALS
04/30055611 DC : 0 BS EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS
BS EN 16323:2014 Glossary of wastewater engineering terms
I.S. EN 62561-5:2017 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 5: REQUIREMENTS FOR EARTH ELECTRODE INSPECTION HOUSINGS AND EARTH ELECTRODE SEALS
DIN EN 1253-5:2015-09 (Draft) GULLIES FOR BUILDINGS - PART 5: GULLIES WITH LIGHT LIQUIDS CLOSURE
DIN EN 1253-3:2016-09 GULLIES FOR BUILDINGS - PART 3: EVALUATION OF CONFORMITY
BS EN 13564-1:2002 Anti-flooding devices for buildings Requirements
BS EN 1253-2:2015 Gullies for buildings Roof drains and floor gullies without trap
EN 1253-5:2017 Gullies for buildings - Part 5: Gullies with light liquids closure
EN 1253-2:2015 Gullies for buildings - Part 2: Roof drains and floor gullies without trap
EN 62561-5:2017 Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals
10/30217319 DC : 0 BS EN 13598-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR ANCILLARY FITTINGS INCLUDING SHALLOW INSPECTION CHAMBERS
IEC 62561-5:2011 Lightning protection system components (LPSC) - Part 5: Requirements for earth electrode inspection housings and earth electrode seals
I.S. EN 16323:2014 GLOSSARY OF WASTEWATER ENGINEERING TERMS
NF EN 13598-1 : 2011 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR ANCILLARY FITTINGS INCLUDING SHALLOW INSPECTION CHAMBERS
I.S. EN 1253-2:2015 GULLIES FOR BUILDINGS - PART 2: ROOF DRAINS AND FLOOR GULLIES WITHOUT TRAP
DIN EN 1253-5:2017-05 GULLIES FOR BUILDINGS - PART 5: GULLIES WITH LIGHT LIQUIDS CLOSURE
I.S. EN 1253-5:2017 GULLIES FOR BUILDINGS - PART 5: GULLIES WITH LIGHT LIQUIDS CLOSURE
I.S. EN 1253-4:2016 GULLIES FOR BUILDINGS - PART 4: ACCESS COVERS
11/30250267 DC : 0 BS EN 16323 - GLOSSARY OF WASTEWATER ENGINEERING TERMS
12/30265301 DC : 0 BS EN 124-1 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: CLASSIFICATION, COMMON DESIGN, PERFORMANCE AND TESTING REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY
15/30326216 DC : 0 BS EN 1253-5 - GULLIES FOR BUILDINGS - PART 5: GULLIES WITH LIGHT LIQUIDS CLOSURE
07/30166095 DC : 0 EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS
UNI EN 16323 : 2014 GLOSSARY OF WASTEWATER ENGINEERING TERMS
BS EN 13598-1:2010 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Specifications for ancillary fittings including shallow inspection chambers
I.S. EN 13598-1:2010 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR ANCILLARY FITTINGS INCLUDING SHALLOW INSPECTION CHAMBERS
UNI EN 13598-1 : 2011 PLASTICS PIPING SYSTEMS FOR NON- PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VILYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR ANCILLARY FITTINGS INCLUDING SHALLOW INSPECTION CHAMBERS
DIN EN 16323:2014-07 GLOSSARY OF WASTEWATER ENGINEERING TERMS
DIN 1986-3:2004-11 Drainage systems on private ground - Part 3: Specifications for service and maintenance
DIN 18195-9:2010-05 WATER-PROOFING OF BUILDINGS - PART 9: PENETRATIONS, TRANSITIONS, CONNECTIONS AND ENDINGS
UNE-EN 1253-3:2017 Gullies for buildings - Part 3: Evaluation of conformity
BS EN 1253-5:2017 Gullies for buildings Gullies with light liquids closure
UNE-EN 1253-4:2017 Gullies for buildings - Part 4: Access covers
DIN EN 13598-1:2011-02 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR ANCILLARY FITTINGS INCLUDING SHALLOW INSPECTION CHAMBERS
UNE-EN 13598-1:2011 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers
EN 13598-1:2010 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers
EN 16323:2014 Glossary of wastewater engineering terms
CEI EN 62561-5 : 2012 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 5: REQUIREMENTS FOR EARTH ELECTRODE INSPECTION HOUSINGS AND EARTH ELECTRODE SEALS
BS EN 62561-5:2017 Lightning protection system components (LPSC) Requirements for earth electrode inspection housings and earth electrode seals
UNE-EN 16323:2014 Glossary of wastewater engineering terms
DIN EN 1253-2:2015-03 GULLIES FOR BUILDINGS - PART 2: ROOF DRAINS AND FLOOR GULLIES WITHOUT TRAP
DIN EN 1253-4:2016-07 GULLIES FOR BUILDINGS - PART 4: ACCESS COVERS
BS EN 1253-4:2016 Gullies for buildings Access covers
EN 13564-1:2002 Anti-flooding devices for buildings - Part 1: Requirements
EN 1253-4:2016 Gullies for buildings - Part 4: Access covers

EN 16323:2014 Glossary of wastewater engineering terms
EN 476:2011 General requirements for components used in drains and sewers
EN 124:1994 Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control
EN 1253-3:2016 Gullies for buildings - Part 3: Evaluation of conformity

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more