EN 12390-1:2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds
Superseded date
16-07-2021
Superseded by
Published date
12-09-2012
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Shape, dimensions and tolerances of specimens
5 Moulds
Annex A (normative) - Application of EN ISO 1101
to concrete test specimens and moulds
Annex B (normative) - Assessment of flatness of
specimens and moulds
This European Standard specifies the shape, dimensions and tolerances of cast concrete test specimens in the form of cubes, cylinders and prisms, and of the moulds required to produce them.NOTEThe tolerances specified in this European Standard are based on the needs of strength testing, but they can be applicable to tests for other properties.
| Committee |
CEN/TC 104
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ONORM EN 12390-1 : 2012 | Identical |
| DIN EN 12390-1:2012-12 | Identical |
| UNI EN 12390-1 : 2012 | Identical |
| I.S. EN 12390-1:2012 | Identical |
| SN EN 12390-1 : 2012 | Identical |
| NS EN 12390-1 : 2012 | Identical |
| BS EN 12390-1:2012 | Identical |
| PN EN 12390-1 : 2013 | Identical |
| NEN EN 12390-1 : 2012 | Identical |
| UNE-EN 12390-1:2013 | Identical |
| NF EN 12390-1 : 2012 | Identical |
| NBN EN 12390-1 : 2012 | Identical |
| ONORM EN 12390-5 : 2009 | TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS |
| 17/30360072 DC : 0 | BS EN 12390-5 - TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS |
| PD CEN/TR 15678:2008 | Concrete. Release of regulated dangerous substances into soil, groundwater and surface water. Test method for new or unapproved constituents of concrete and for production concretes |
| I.S. EN 480-15:2013 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 15: REFERENCE CONCRETE AND METHOD FOR TESTING VISCOSITY MODIFYING ADMIXTURES |
| ONORM EN 12390-7 : 2009 | TESTING HARDENED CONCRETE - PART 7: DENSITY OF HARDENED CONCRETE |
| BS EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
| 17/30354239 DC : 0 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| 17/30351884 DC : 0 | BS EN 12390-10 - TESTING HARDENED CONCRETE - PART 10: DETERMINATION OF THE CARBONATION RESISTANCE OF CONCRETE AT ATMOSPHERIC LEVELS OF CARBON DIOXIDE |
| UNI EN 13369 : 2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| 03/302295 DC : DRAFT APR 2003 | EN 14651 - PRECAST CONCRETE PRODUCTS - TEST METHOD FOR METALLIC FIBER CONCRETE - MEASURING THE FLEXURAL TENSILE STRENGTH |
| EN 12504-4:2004 | Testing concrete - Part 4: Determination of ultrasonic pulse velocity |
| EN 12390-13:2013 | Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression |
| BS EN 206 : 2013 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| 15/30317321 DC : 0 | BS EN 14944-1 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF MIGRATION FROM FACTORY MADE CEMENTITIOUS PRODUCTS ON THE ORGANOLEPTIC PARAMETERS |
| I.S. EN 12390-2:2009 | TESTING HARDENED CONCRETE - PART 2: MAKING AND CURING SPECIMENS FOR STRENGTH TESTS |
| BS EN 13791:2007 | Assessment of in-situ compressive strength in structures and pre-cast concrete components |
| I.S. EN 12390-7:2009 | TESTING HARDENED CONCRETE - PART 7: DENSITY OF HARDENED CONCRETE |
| DIN EN 13863-2:2004-01 | Concrete pavements - Part 2: Test method for the determination of the bond between two layers; German version EN 13863-2:2003 |
| BS EN 13877-1:2013 | Concrete pavements Materials |
| BS EN 13412:2006 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of modulus of elasticity in compression |
| UNE-EN 13877-2:2013 | Concrete pavements - Part 2: Functional requirements for concrete pavements |
| PD CEN/TR 15177:2006 | Testing the freeze-thaw resistance of concrete. Internal structural damage |
| I.S. EN 14488-4:2005 | TESTING SPRAYED CONCRETE - PART 4: BOND STRENGTH OF CORES BY DIRECT TENSION |
| EN 12390-2:2009 | Testing hardened concrete - Part 2: Making and curing specimens for strength tests |
| EN 13412:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression |
| DIN EN 14651:2007-12 | TEST METHOD FOR METALLIC FIBERED CONCRETE - MEASURING THE FLEXURAL TENSILE STRENGTH (LIMIT OF PROPORTIONALITY (LOP), RESIDUAL) |
| EN 12390-4:2000 | Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines |
| EN 12390-5:2009 | Testing hardened concrete - Part 5: Flexural strength of test specimens |
| DIN EN 12504-4:2004-12 | Testing concrete in structures - Part 4: Determination of ultrasonic pulse velocity |
| CEN/TR 15177:2006 | Testing the freeze-thaw resistance of concrete - Internal structural damage |
| EN 1354:2005 | Determination of compressive strength of lightweight aggregate concrete with open structure |
| I.S. EN 14944-1:2006 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
| 12/30259409 DC : 0 | BS EN 12390-13 - TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION |
| S.R. CEN TR 15678:2008 | CONCRETE - RELEASE OF REGULATED DANGEROUS SUBSTANCES INTO SOIL, GROUNDWATER AND SURFACE WATER - TEST METHOD FOR NEW OR UNAPPROVED CONSTITUENTS OF CONCRETE AND FOR PRODUCTION CONCRETES |
| DIN EN 206:2014-07 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| BS EN 480-15:2013 | Admixtures for concrete, mortar and grout. Test methods Reference concrete and method for testing viscosity modifying admixtures |
| S.R. CEN TS 12390-10:2007 | TESTING HARDENED CONCRETE - PART 10: DETERMINATION OF THE RELATIVE CARBONATION RESISTANCE OF CONCRETE |
| UNI EN 12504-1 : 2009 | TESTING CONCRETE IN STRUCTURES - PART 1: CORED SPECIMENS - TAKING, EXAMINING AND TESTING IN COMPRESSION |
| BS EN 13369:2013 | Common rules for precast concrete products |
| PREN 12390-17 : DRAFT 2018 | TESTING HARDENED CONCRETE - PART 17: DETERMINATION OF CREEP OF CONCRETE IN COMPRESSION |
| DIN EN 14488-4:2008-08 | TESTING SPRAYED CONCRETE - PART 4: BOND STRENGTH OF CORES BY DIRECT TENSION |
| DIN EN 12839:2012-03 | PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES |
| DIN EN 14488-3:2006-09 | Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens |
| DIN EN 13412:2006-11 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression |
| BS EN 12839:2012 | Precast concrete products. Elements for fences |
| BS EN 12390-7:2009 | Testing hardened concrete Density of hardened concrete |
| BS EN 12618-3:2004 | Products and systems for the protection and repair of concrete structures. Test methods Determination of the adhesion of injection products, with or without thermal cycling. Slant shear method |
| I.S. EN 13877-1:2013 | CONCRETE PAVEMENTS - PART 1: MATERIALS |
| DIN EN 12390-3:2009-07 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| I.S. EN 13877-2:2013 | CONCRETE PAVEMENTS - PART 2: FUNCTIONAL REQUIREMENTS FOR CONCRETE PAVEMENTS |
| I.S. EN 12390-6:2009 | TESTING HARDENED CONCRETE - PART 6: TENSILE SPLITTING STRENGTH OF TEST SPECIMENS |
| I.S. EN 13412:2006 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF MODULUS OF ELASTICITY IN COMPRESSION |
| DIN EN 12390-6:2010-09 | Testing hardened concrete - Part 6: Tensile splitting strength of test specimens; German version EN 12390-6:2009 |
| DIN EN 13286-51:2005-03 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 51: METHOD FOR THE MANUFACTURE OF TEST SPECIMENS OF HYDRAULICALLY BOUND MIXTURES USING VIBRATING HAMMER COMPACTION |
| I.S. EN 480-1:2014 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 1: REFERENCE CONCRETE AND REFERENCE MORTAR FOR TESTING |
| DIN EN 13584:2003-11 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF CREEP IN COMPRESSION FOR REPAIR PRODUCTS |
| I.S. EN 14651:2005 | TEST METHOD FOR METALLIC FIBERED CONCRETE - MEASURING THE FLEXURAL TENSILE STRENGTH (LIMIT OF PROPORTIONALITY (LOP), RESIDUAL) |
| UNI EN 12390-7 : 2009 | TESTING HARDENED CONCRETE - PART 7: DENSITY OF HARDENED CONCRETE |
| I.S. EN 1354:2005 | DETERMINATION OF COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE |
| DIN EN 206-1:2001-07 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| 17/30360081 DC : 0 | BS EN 12390-2 - TESTING HARDENED CONCRETE - PART 2: MAKING AND CURING SPECIMENS FOR STRENGTH TESTS |
| PREN 1504-10 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| I.S. CEN TR 15177:2006 | TESTING THE FREEZE-THAW RESISTANCE OF CONCRETE - INTERNAL STRUCTURAL DAMAGE |
| I.S. EN 206-1:2002 | CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY (INCLUDING IRISH NATIONAL ANNEX) |
| 15/30327977 DC : 0 | BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| DIN EN 480-15:2013-06 | Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures |
| ONORM EN 12390-2 : 2009 | TESTING HARDENED CONCRETE - PART 2: MAKING AND CURING SPECIMENS FOR STRENGTH TESTS |
| 03/306075 DC : DRAFT APR 2003 | BS EN 13791 - ASSESSMENT OF CONCRETE COMPRESSIVE STRENGTH IN STRUCTURES OR IN STRUCTURAL ELEMENTS |
| DD CEN/TS 12390-10:2007 | Testing hardened concrete Determination of the relative carbonation resistance of concrete |
| 03/314375 DC : DRAFT DEC 2003 | BS EN 14844 - PRECAST CONCRETE BOX CULVERTS |
| PREN 12504-1 : DRAFT 2017 | TESTING CONCRETE IN STRUCTURES - PART 1: CORED SPECIMENS - TAKING, EXAMINING AND TESTING IN COMPRESSION |
| DIN EN 14944-3:2015-06 (Draft) | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS |
| DIN EN 13369:2013-08 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| UNE-EN 480-15:2013 | Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures |
| I.S. EN 13369:2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| PREN 12390-6 : DRAFT 2009 | TESTING HARDENED CONCRETE - PART 6: TENSILE SPLITTING STRENGTH OF TEST SPECIMENS |
| I.S. EN 12390-3:2009 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| DIN EN 1354:2005-09 | Determination of compressive strength of lightweight aggregate concrete with open structure; German version EN 1354:2005 |
| DIN EN 480-1:2015-01 | Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing |
| DIN EN 13791:2008-05 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| BS EN 1354:2005 | Determination of compressive strength of lightweight aggregate concrete with open structure |
| BS EN 14488-4 : 2005 | TESTING SPRAYED CONCRETE - PART 4: BOND STRENGTH OF CORES BY DIRECT TENSION |
| DIN EN 14944-3:2009-01 | Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products |
| UNE-EN 480-1:2015 | Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing |
| EN 12504-1:2009 | Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression |
| EN 12390-7:2009 | Testing hardened concrete - Part 7: Density of hardened concrete |
| EN 13584:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products |
| UNI EN 12839 : 2012 | PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES |
| UNI EN 12390-2 : 2009 | TESTING HARDENED CONCRETE - PART 2: MAKING AND CURING SPECIMENS FOR STRENGTH TESTS |
| UNI EN 13791 : 2008 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| UNI EN 480-1 : 2014 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 1: REFERENCE CONCRETE AND REFERENCE MORTAR FOR TESTING |
| UNI EN 1504-10 : 2005 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| UNI EN 13877-1 : 2013 | CONCRETE PAVEMENTS - PART 1: MATERIALS |
| EN 14488-3:2006 | Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens |
| UNI EN 14488-4 : 2008 | TESTING SPRAYED CONCRETE - PART 4: BOND STRENGTH OF CORES BY DIRECT TENSION |
| UNI EN 12390-6 : 2010 | TESTING HARDENED CONCRETE - PART 6: TENSILE SPLITTING STRENGTH OF TEST SPECIMENS |
| UNI EN 12390-3 : 2009 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| UNI EN 13877-2 : 2013 | CONCRETE PAVEMENTS - PART 2: FUNCTIONAL REQUIREMENTS FOR CONCRETE PAVEMENTS |
| DIN EN 12390-13:2014-06 | Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression |
| EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
| UNI EN 480-15 : 2013 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 15: REFERENCE CONCRETE AND METHOD FOR TESTING VISCOSITY MODIFYING ADMIXTURES |
| PREN 12390-2 : DRAFT 2017 | TESTING HARDENED CONCRETE - PART 2: MAKING AND CURING SPECIMENS FOR STRENGTH TESTS |
| 17/30360078 DC : 0 | BS EN 12504-1 - TESTING CONCRETE IN STRUCTURES - PART 1: CORED SPECIMENS - TAKING, EXAMINING AND TESTING IN COMPRESSION |
| PREN 13369 : DRAFT 2017 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| I.S. EN 13791:2007 | ASSESSMENT OF IN-SITU COMPRESSIVE STRENGTH IN STRUCTURES AND PRECAST CONCRETE COMPONENTS |
| BS EN 12390-13:2013 | Testing hardened concrete Determination of secant modulus of elasticity in compression |
| PREN 12390-16 : DRAFT 2018 | TESTING HARDENED CONCRETE - PART 16: DETERMINATION OF THE SHRINKAGE OF CONCRETE |
| 12/30257889 DC : 0 | BS EN 206 - CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| PREN 12390-5 : DRAFT 2017 | TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS |
| UNI EN 12390-13 : 2013 | TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION |
| PREN 14488-4 : DRAFT 2002 | TESTING SPRAYED CONCRETE - PART 4: BOND STRENGTH OF CORES BY DIRECT TENSION |
| UNE-EN 13369:2013 | Common rules for precast concrete products |
| UNI CEN/TR 15678 : 2008 | CONCRETE - RELEASE OF REGULATED DANGEROUS SUBSTANCES INTO SOIL, GROUNDWATER AND SURFACE WATER - TEST METHOD FOR NEW OR UNAPPROVED CONSTITUENTS OF CONCRETE AND FOR PRODUCTION CONCRETES |
| 04/30083253 DC : DRAFT MAY 2004 | EN 14944-1 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
| DIN EN 12504-1:2009-07 | TESTING CONCRETE IN STRUCTURES - PART 1: CORED SPECIMENS - TAKING, EXAMINING AND TESTING IN COMPRESSION |
| 16/30334711 DC : DRAFT JAN 2016 | BS EN 12390-15 - TESTING HARDENED CONCRETE - PART 15: ADIABATIC METHOD FOR THE DETERMINATION OF HEAT RELEASED BY CONCRETE DURING ITS HARDENING PROCESS |
| I.S. EN 12504-4:2004 | TESTING CONCRETE - PART 4: DETERMINATION OF ULTRASONIC PULSE VELOCITY |
| I.S. EN 12390-13:2013 | TESTING HARDENED CONCRETE - PART 13: DETERMINATION OF SECANT MODULUS OF ELASTICITY IN COMPRESSION |
| PREN 12390-3 : DRAFT 2017 | TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| 17/30360096 DC : 0 | BS EN 12390-3 - TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS |
| 17/30360084 DC : 0 | BS EN 12390-7 - TESTING HARDENED CONCRETE - PART 7: DENSITY OF HARDENED CONCRETE |
| ONORM EN 12504-1 : 2009 | TESTING CONCRETE IN STRUCTURES - PART 1: CORED SPECIMENS - TAKING, EXAMINING AND TESTING IN COMPRESSION |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| BS EN 12504-1:2009 | Testing concrete in structures Cored specimens. Taking, examining and testing in compression |
| I.S. EN 12839:2012 | PRECAST CONCRETE PRODUCTS - ELEMENTS FOR FENCES |
| DIN EN 12390-2:2009-08 | TESTING HARDENED CONCRETE - PART 2: MAKING AND CURING SPECIMENS FOR STRENGTH TESTS |
| DIN EN 12390-5:2009-07 | TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS |
| BS EN 12390-6:2000 | Testing hardened concrete Tensile splitting strength of test specimens |
| UNE-EN 13877-1:2013 | Concrete pavements - Part 1: Materials |
| BS EN 480-1:2014 | Admixtures for concrete, mortar and grout. Test methods Reference concrete and reference mortar for testing |
| BS EN 206-1:2000 | Concrete Specification, performance, production and conformity |
| BS EN 12390-5:2009 | Testing hardened concrete Flexural strength of test specimens |
| UNE-EN 12839:2012 | Precast concrete products - Elements for fences |
| BS EN 13584:2003 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of creep in compression for repair products |
| BS EN 12390-4:2000 | Testing hardened concrete Compressive strength. Specification for testing machines |
| BS EN 13863-2:2003 | Concrete pavements Test method for the determination of the bond between two layers |
| BS EN 12390-2:2009 | Testing hardened concrete Making and curing specimens for strength tests |
| DIN EN 14944-1:2006-07 | Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters |
| BS EN 12390-3:2009 | Testing hardened concrete Compressive strength of test specimens |
| BS EN 12504-4:2004 | Testing concrete Determination of ultrasonic pulse velocity |
| BS EN 13877-2:2013 | Concrete pavements Functional requirements for concrete pavements |
| BS EN 14488-3:2006 | Testing sprayed concrete Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens |
| CEN/TR 15678:2008 | Concrete - Release of regulated dangerous substances into soil, groundwater and surface water - Test method for new or unapproved constituents of concrete and for production concretes |
| EN 14488-4:2005+A1:2008 | Testing sprayed concrete - Part 4: Bond strength of cores by direct tension |
| UNI EN 12390-5 : 2009 | TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS |
| EN 13877-1:2013 | Concrete pavements - Part 1: Materials |
| EN 13863-2:2003 | Concrete pavements - Part 2: Test method for the determination of the bond between two layers |
| EN 14944-3:2007 | Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementititous products |
| EN 480-15:2013 | Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures |
| EN 13877-2:2013 | Concrete pavements - Part 2: Functional requirements for concrete pavements |
| EN 14651:2005+A1:2007 | Test method for metallic fibre concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual) |
| EN 14944-1:2006 | Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters |
| EN 480-1:2014 | Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing |
| EN 13791:2007 | Assessment of in-situ compressive strength in structures and precast concrete components |
| PREN 14944-3 : DRAFT 2015 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS |
| PREN 14944-1 : DRAFT 2015 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF MIGRATION FROM FACTORY MADE CEMENTITIOUS PRODUCTS ON THE ORGANOLEPTIC PARAMETERS |
| 01/108943 DC : DRAFT DEC 2001 | PREN 13286-51 - UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 51: METHODS FOR MAKING TEST SPECIMENS BY VIBRATING HAMMER COMPACTION |
| 11/30251426 DC : DRAFT OCT 2011 | BS EN 480-15 - ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 15: REFERENCE CONCRETE AND METHOD FOR TESTING VISCOSITY MODIFYING ADMIXTURES |
| 07/30163668 DC : 0 | BS EN 12839 - PRECAST CONCRETE PRODUCTS - ELEMENTS OF FENCES |
| I.S. EN 12390-5:2009 | TESTING HARDENED CONCRETE - PART 5: FLEXURAL STRENGTH OF TEST SPECIMENS |
| BS EN 14944-3:2007 | Influence of cementitious products on water intended for human consumption. Test methods Migration of substances from factory-made cementitious products |
| PREN 12390-7 : DRAFT 2017 | TESTING HARDENED CONCRETE - PART 7: DENSITY OF HARDENED CONCRETE |
| 09/30200044 DC : 0 | BS EN 12390-6 - TESTING HARDENED CONCRETE - PART 6: TENSILE SPLITTING STRENGTH OF TEST SPECIMENS |
| 02/104240 DC : DRAFT JUNE 2002 | PREN 14488-4 - TESTING SPRAYED CONCRETE - PART 4: BOND STRENGTH OF CORES BY DIRECT TENSION |
| I.S. EN 13369:2018 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| PREN 12390-10 : DRAFT 2017 | TESTING HARDENED CONCRETE - PART 10: DETERMINATION OF THE CARBONATION RESISTANCE OF CONCRETE AT ATMOSPHERIC LEVELS OF CARBON DIOXIDE |
| 18/30371537 DC : DRAFT APR 2018 | BS EN 12390-16 - TESTING HARDENED CONCRETE - PART 16: DETERMINATION OF THE SHRINKAGE OF CONCRETE |
| 15/30317324 DC : 0 | BS EN 14944-3 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITIOUS PRODUCTS |
| 18/30371540 DC : DRAFT APR 2018 | BS EN 12390-17 - TESTING HARDENED CONCRETE - PART 17: DETERMINATION OF CREEP OF CONCRETE IN COMPRESSION |
| I.S. EN 14944-3:2007 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITITOUS PRODUCTS |
| CEN/TS 12390-10:2007 | Testing hardened concrete - Part 10: Determination of the relative carbonation resistance of concrete |
| I.S. EN 12504-1:2009 | TESTING CONCRETE IN STRUCTURES - PART 1: CORED SPECIMENS - TAKING, EXAMINING AND TESTING IN COMPRESSION |
| EN 13369:2018 | Common rules for precast concrete products |
| I.S. EN 1504-10:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| DIN EN 13877-2:2013-06 | Concrete pavements - Part 2: Functional requirements for concrete pavements |
| DIN EN 13877-1:2013-06 | Concrete pavements - Part 1: Materials |
| DIN EN 14944-1:2015-06 (Draft) | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
| DIN EN 12390-7:2009-07 | TESTING HARDENED CONCRETE - PART 7: DENSITY OF HARDENED CONCRETE |
| BS EN 14944-1:2006 | Influence of cementitious products on water intended for human consumption. Test methods Influence of factory made cementitious products on organoleptic parameters |
| BS EN 13286-51:2004 | Unbound and hydraulically bound mixtures Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction |
| BS EN 14651 : 2005 | TEST METHOD FOR METALLIC FIBRE CONCRETE - MEASURING THE FLEXURAL TENSILE STRENGTH (LIMIT OF PROPORTIONALITY (LOP), RESIDUAL) |
| EN 12618-3:2004 | Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method |
| EN 12390-6:2009 | Testing hardened concrete - Part 6: Tensile splitting strength of test specimens |
| EN 12839:2012 | Precast concrete products - Elements for fences |
| DIN EN 12618-3:2004-11 | Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method |
| EN 13286-51:2004 | Unbound and hydraulically bound mixtures - Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction |
| ONORM EN 14944-1 : 2006 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS |
| ONORM EN 14488-3 : 2006 | TESTING SPRAYED CONCRETE - PART 3: FLEXURAL STRENGTHS (FIRST PEAK, ULTIMATE AND RESIDUAL) OF FIBRE REINFORCED BEAM SPECIMENS |
| ONORM EN 14944-3 : 2008 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 3: MIGRATION OF SUBSTANCES FROM FACTORY-MADE CEMENTITITOUS PRODUCTS |
| EN ISO 1101:2017 | Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.