EN 12163:2016
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Copper and copper alloys - Rod for general purposes
Withdrawn date
31-01-2017
Published date
20-07-2016
Publisher
Sorry this product is not available in your region.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
5 Ordering information
6 Requirements
7 Sampling
8 Test methods
9 Declaration of conformity and inspection documentation
10 Marking, packaging, labelling
Bibliography
This European Standard specifies the composition, property requirements and dimensional tolerances for copper alloy rod in the shape of circles, squares, hexagons or octagons, finally produced by drawing or extruding intended for general purposes.The sampling procedures and the methods of test for verification of conformity to the requirements of this European Standard are also specified.
| Committee |
CEN/TC 133
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| I.S. EN 12163:2016 | Identical |
| SN EN 12163 : 2016 | Identical |
| UNI EN 12163:2016 | Identical |
| NEN EN 12163 : 2016 | Identical |
| UNE-EN 12163:2017 | Identical |
| PN EN 12163 : 2016 | Identical |
| BS EN 12163:2011 | Identical |
| NBN EN 12163 : 2011 | Identical |
| DIN EN 12163:2015-12 (Draft) | Identical |
| UNI EN 12163 : 2011 | Identical |
| SS-EN 12163:2016 | Identical |
| NF EN 12163 : 2016 | Identical |
| NS EN 12163 : 2016 | Identical |
| DS EN 12163 : 2016 | Identical |
| DIN EN 12163:1998-04 | Identical |
| BS EN 12163:2016 | Identical |
| UNE-EN ISO 5182:2017 | Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016) |
| EN 12516-4:2014 | Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
| 05/30134037 DC : 0 | EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| BS EN 16617:2015 | Pipework. Corrugated metal hose assemblies for combustible gas. Performance requirements, testing and marking |
| 12/30243465 DC : 0 | BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| DIN EN 16617:2015-07 | PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
| DIN CEN/TS 13547:2007-02 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| 11/30217430 DC : 0 | BS EN 60404-15 - MAGNETIC MATERIALS - PART 15: - METHODS FOR THE DETERMINATION OF THE RELATIVE MAGNETIC PERMEABILITY OF FEEBLY MAGNETIC MATERIALS |
| DIN 86720:2002-07 | Gate valves flat sided of gun metall with screwed bonnet and flanges, DN 20 to DN 100, PN 16 |
| UNE-EN 13547:2014 | Industrial valves - Copper alloy ball valves |
| UNI EN 13601 : 2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| DD CEN/TS 13388:2008 | Copper and copper alloys. Compendium of compositions and products |
| DIN 30690-1:2016-04 | CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
| I.S. EN 13547:2013 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| DIN EN ISO/IEC 80079-38:2012-08 (Draft) | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016) |
| EN 12165:2016 | Copper and copper alloys - Wrought and unwrought forging stock |
| DIN EN 13602:2013-09 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| BS EN 12288:2010 | Industrial valves. Copper alloy gate valves |
| UNE-EN 331:2016 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| BS EN 1252-1:1998 | Cryogenic vessels. Materials Toughness requirements for temperatures below -80°C |
| I.S. EN 13601:2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| I.S. EN 12288:2010 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| EN ISO 21028-1:2016 | Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016) |
| EN 12288:2010 | Industrial valves - Copper alloy gate valves |
| EN 12166:2016 | Copper and copper alloys - Wire for general purposes |
| EN 13547:2013 | Industrial valves - Copper alloy ball valves |
| EN 1337-5:2005 | Structural bearings - Part 5: Pot bearings |
| CEN/TS 13547:2006 | Industrial valves - Copper alloy ball valves |
| PREN 13601 : DRAFT 2011 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| I.S. EN 1252-1:1998 | CRYOGENIC VESSELS - MATERIALS - PART 1: TOUGHNESS REQUIREMENTS FOR TEMPERATURES BELOW -80 DEGREE C |
| PREN 1503-4 : DRAFT 2015 | VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 4: COPPER ALLOYS SPECIFIED IN EUROPEAN STANDARDS |
| 15/30312459 DC : 0 | BS EN ISO 5182 - RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT |
| DD CEN/TS 13547:2006 | Industrial valves. Copper alloy ball valves |
| UNE-EN 16668:2016 | Industrial valves - Requirements and testing for metallic valves as pressure accessories |
| UNI EN 12516-4 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| ISO 6509-2:2017 | Corrosion of metals and alloys Determination of dezincification resistance of copper alloys with zinc Part 2: Assessment criteria |
| S.R. CEN/TS 13388:2015 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| I.S. EN 16617:2015 | PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
| PD CEN/TS 13388:2015 | Copper and copper alloys. Compendium of compositions and products |
| DIN EN 12516-4:2015-01 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| EN 12164:2016 | Copper and copper alloys - Rod for free machining purposes |
| EN 12168:2016 | Copper and copper alloys - Hollow rod for free machining purposes |
| DIN EN 12288:2010-10 | Industrial valves - Copper alloy gate valves |
| DIN EN 12168:2015-12 (Draft) | COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
| DIN EN 12165:2015-12 (Draft) | COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK |
| DIN EN 1337-5:2005-07 | Structural bearings - Part 5: Pot bearings |
| DIN EN 12164:2015-12 (Draft) | COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES |
| BS EN 1337-5:2005 | Structural bearings Pot bearings |
| I.S. EN 12166:2016 | COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES |
| I.S. EN 331:2015 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| I.S. EN 12168:2016 | COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
| I.S. EN 13602:2013 | COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS |
| DIN EN 14420-4:2013-09 | Hose fittings with clamp units - Part 4: Flange connections |
| I.S. EN 14420-4:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| I.S. EN 12165:2016 | COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK |
| I.S. EN 12164:2016 | COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES |
| DIN SPEC 9700 E : 2013 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| I.S. EN 60404-15:2012 | MAGNETIC MATERIALS - PART 15: METHODS FOR THE DETERMINATION OF THE RELATIVE MAGNETIC PERMEABILITY OF FEEBLY MAGNETIC MATERIALS |
| PREN 12516-4 : DRAFT 2011 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| 02/710460 DC : DRAFT AUG 2002 | ISO/DIS 21028-1 - CRYOGENIC VESSELS - TOUGHNESS REQUIREMENTS FOR MATERIALS AT CRYOGENIC TEMPERATURE - PART 1: TEMPERATURES BELOW -80 DEGREES C |
| I.S. EN 12516-4:2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| I.S. EN ISO 5182:2016 | RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016) |
| 09/30205880 DC : DRAFT OCT 2009 | BS EN 12288 - INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| I.S. EN 16668:2016 | INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
| BS EN 60404-15 : 2012 | MAGNETIC MATERIALS - PART 15: METHODS FOR THE DETERMINATION OF THE RELATIVE MAGNETIC PERMEABILITY OF FEEBLY MAGNETIC MATERIALS (IEC 60404-15:2012) |
| 11/30249111 DC : 0 | BS EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| 15/30322049 DC : DRAFT MAY 2015 | BS EN 1503-4 - VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 4: COPPER ALLOYS SPECIFIED IN EUROPEAN STANDARDS |
| BS EN ISO 5182:2009 | Resistance welding. Materials for electrodes and ancillary equipment |
| 11/30240456 DC : 0 | BS EN 13601 - COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| PD 6641:1999 | Copper and copper alloys. Compendium of compositions and products |
| PREN 14420-4 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| BS EN 16668 : 2016 | INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
| UNI EN 13547 : 2013 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| EN ISO/IEC 80079-38:2016 | Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) |
| I.S. CEN TS 13547:2006 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| DIN EN 1433:2005-09 | DRAINAGE CHANNELS FOR VEHICULAR AND PEDESTRIAN AREAS - CLASSIFICATION, DESIGN AND TESTING REQUIREMENTS, MARKING AND EVALUATION OF CONFORMITY |
| DIN EN 331:2016-04 | MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
| DIN EN 12166:2015-12 (Draft) | COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES |
| BS EN 12168:1998 | Copper and copper alloys. Hollow rod for free machining purposes |
| UNI EN 12288 : 2010 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| UNI EN 1710 : 2008 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| UNI EN 13602 : 2013 | COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS |
| UNI EN 14420-4 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| DIN EN 13547:2013-12 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| 13/30287824 DC : 0 | BS EN 16668 - INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
| BS EN 13547:2013 | Industrial valves. Copper alloy ball valves |
| BS EN 12516-4 : 2014 | INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
| 15/30286859 DC : DRAFT JAN 2015 | BS EN ISO 21028-1 - CRYOGENIC VESSELS - TOUGHNESS REQUIREMENTS FOR MATERIALS AT CRYOGENIC TEMPERATURE - PART 1: TEMPERATURES BELOW -80 DEGREES C |
| UNE-EN 16617:2015 | Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking |
| UNE-EN 12516-4:2016 | Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
| BS EN ISO/IEC 80079-38 : 2016 | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016) |
| ISO/IEC 80079-38:2016 | Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines |
| PREN 12288 : DRAFT 2009 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| I.S. EN ISO/IEC 80079-38:2016 | EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012) |
| EN 12861:2018 | Copper and copper alloys - Scrap |
| I.S. EN 12861:1999 | COPPER AND COPPER ALLOYS - SCRAP |
| I.S. CEN TS 13388:2004 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| DIN EN 1710:2008-08 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| DIN EN 1503-4:2016-06 | VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 4: COPPER ALLOYS SPECIFIED IN EUROPEAN STANDARDS |
| 04/30124829 DC : 0 | EN 15070 - STRIP WOUND FLEXIBLE SAFETY METALLIC HOSE ASSEMBLIES FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUELS |
| BS EN 12165:2011 | Copper and copper alloys. Wrought and unwrought forging stock |
| UNE-CEN/TS 13388:2010 EX | Copper and copper alloys - Compendium of compositions and products |
| UNE-EN 13602:2014 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| ISO 21028-1:2016 | Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below -80 degrees C |
| UNE-EN 13601:2014 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| BS EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| IEC 60404-15:2012+AMD1:2016 CSV | Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials |
| ISO 5182:2016 | Resistance welding Materials for electrodes and ancillary equipment |
| BS EN 1710 : 2005 | EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
| BS EN 13601:2013 | Copper and copper alloys. Copper rod, bar and wire for general electrical purposes |
| CEN/TS 13388:2015 | Copper and copper alloys - Compendium of compositions and products |
| BS EN 14420-4:2013 | Hose fittings with clamp units Flange connections |
| BS EN 13602:2013 | Copper and copper alloys. Drawn, round copper wire for the manufacture of electrical conductors |
| BS EN 12166:2011 | Copper and copper alloys. Wire for general purposes |
| BS EN 12164:2011 | Copper and copper alloys. Rod for free machining purposes |
| EN 16668:2016+A1:2018 | Industrial valves - Requirements and testing for metallic valves as pressure accessories |
| BS EN 1433:2002 | Drainage channels for vehicular and pedestrian areas. Classification, design and testing requirements, marking and evaluation of conformity |
| EN ISO 5182:2016 | Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016) |
| EN 14420-4:2013 | Hose fittings with clamp units - Part 4: Flange connections |
| EN 13602:2013 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| EN 16617:2015 | Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking |
| EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| CEI EN 60404-15 : 2014 | MAGNETIC MATERIALS - PART 15: METHODS FOR THE DETERMINATION OF THE RELATIVE MAGNETIC PERMEABILITY OF FEEBLY MAGNETIC MATERIALS |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| UNE-EN ISO 21028-1:2017 | Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016) |
| 10/30234613 DC : DRAFT NOV 2010 | BS EN 14420-4 - HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| BS EN ISO 21028-1:2016 | Cryogenic vessels. Toughness requirements for materials at cryogenic temperature Temperatures below -80 °C |
| BS ISO 5182 : 2008 | RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT |
| EN 13601:2013 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| I.S. EN ISO 21028-1:2016 | CRYOGENIC VESSELS - TOUGHNESS REQUIREMENTS FOR MATERIALS AT CRYOGENIC TEMPERATURE - PART 1: TEMPERATURES BELOW -80 DEGREES C (ISO 21028-1:2016) |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| EN 60404-15:2012/A1:2017 | MAGNETIC MATERIALS - PART 15: METHODS FOR THE DETERMINATION OF THE RELATIVE MAGNETIC PERMEABILITY OF FEEBLY MAGNETIC MATERIALS (IEC 60404-15:2012/A1:2016) |
| DIN EN 13601:2013-09 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| BS EN 1503-4:2016 | Valves. Materials for bodies, bonnets and covers Copper alloys specified in European Standards |
| DIN CEN/TS 13388;DIN SPEC 9700:2013-05 | COPPER AND COPPER ALLOYS - COMPENDIUM OF COMPOSITIONS AND PRODUCTS |
| EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
| EN 14977:2006 | Copper and copper alloys - Detection of tensile stress - 5 % ammonia test |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 6509-1:2014 | Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method |
| EN ISO 80000-1:2013 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
| EN 1412:2016 | Copper and copper alloys - European numbering system |
| ISO 1190-1:1982 | Copper and copper alloys — Code of designation — Part 1: Designation of materials |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 1811-2:1988 | Copper and copper alloys — Selection and preparation of samples for chemical analysis — Part 2: Sampling of wrought products and castings |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 1173:2008 | Copper and copper alloys - Material condition designation |
| EN ISO 6509-1:2014 | Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method (ISO 6509-1:2014) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 6957:1988 | Copper alloys Ammonia test for stress corrosion resistance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.