EN 1093-7:1998+A1:2008
Current
The latest, up-to-date edition.
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet
16-07-2008
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 Principle
5 Description of the test arrangement
6 Operation of the air cleaning system
7 Procedure
8 Expression of results
9 Test report
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
This European Standard specifies a test rig method for the measurement of the separation efficiency by mass of air cleaning systems, operating under defined conditions. The method shall apply to systems that clean air of aerosols (smoke, dust, fume, mist), vapour or gas with defined air inlet and air outlet which can be connected to measurement ducts.Measurement of the separation efficiency by mass of an air cleaning system for an intended use can serve for the:a)evaluation of the performance of an air cleaning system;b)evaluation of the improvement of the air cleaning system;c)comparison of air cleaning systems;d)ranking of air cleaning systems according to their separation efficiency by mass;e)determination of the state of the art of air cleaning systems of the same intended use with respect to their separation efficiency by mass.
| Committee |
CEN/TC 114
|
| DevelopmentNote |
1998 Edition Re-Issued in July 2008 & incorporates AMD 1 2008. (07/2008)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NBN EN 1093-7 : 1998 + A1 2008 | Identical |
| NEN EN 1093-7 : 1998 + A1 2008 | Identical |
| BS EN 1093-7 : 1998 | Identical |
| BS EN 1093-7 : 1999 | Identical |
| NF EN 1093-7 : 1999 + A1 2008 | Identical |
| UNE-EN 1093-7:1999 | Identical |
| NS EN 1093-7 : 1998 + A1 2008 | Identical |
| I.S. EN 1093-7:1999 | Identical |
| SN EN 1093-7 : 1999 + A1 2008 | Identical |
| PN EN 1093-7 : 2005 + A1 2010 | Identical |
| UNI EN 1093-7 : 2008 | Identical |
| DIN EN 1093-7:2008-11 | Identical |
| UNE-EN 1093-7:1999+A1:2008 | Identical |
| BS EN 1093-7:1998+A1:2008 | Identical |
| 11/30242017 DC : 0 | BS EN ISO 15012-1 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY |
| PREN 16770 : DRAFT 2014 | SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS |
| EN 12779:2015 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| EN 1093-1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods |
| 07/30165769 DC : 0 | BS EN 1093-1 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 1: SELECTION OF TEST METHODS |
| BS EN ISO 15012-4:2016 | Health and safety in welding and allied processes. Equipment for capture and separation of welding fume General requirements |
| 13/30254060 DC : 0 | BS EN ISO 15012-4 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 4: DESIGN REQUIREMENTS |
| DIN EN 12779:2016-03 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| I.S. EN ISO 15012-1:2013 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY (ISO 15012-1:2013) |
| I.S. EN 1093-1:2008 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 1: SELECTION OF TEST METHODS |
| I.S. EN 12779:2015 | SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS |
| UNI EN ISO 15012-1 : 2013 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY |
| 14/30292850 DC : 0 | BS EN 12779 - SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
| 00/709412 DC : DRAFT MAY 2000 | BS EN ISO 15012-1 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 1: TESTING OF THE SEPARATION EFFICIENCY FOR WELDING FUME |
| PREN 12779 : DRAFT 2014 | SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
| DIN EN ISO 15012-1:2013-08 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY (ISO 15012-1:2013) |
| EN ISO 15012-4:2016 | Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: General requirements (ISO 15012-4:2016) |
| UNI EN 1093-1 : 2009 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 1: SELECTION OF TEST METHODS |
| ISO/TR 18569:2004 | Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
| 14/30301874 DC : 0 | BS EN 16770 - SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS |
| DIN EN 1093-1:2009-02 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 1: SELECTION OF TEST METHODS |
| BS EN 1093-1:2008 | Safety of machinery. Evaluation of the emission of airborne hazardous substances Selection of test methods |
| ISO 15012-4:2016 | Health and safety in welding and allied processes Equipment for capture and separation of welding fume Part 4: General requirements |
| BS EN 12779:2015 | Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements |
| UNE-EN ISO 15012-1:2013 | Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: Requirements for testing and marking of separation efficiency (ISO 15012-1:2013) |
| BS EN ISO 15012-1:2013 | Health and safety in welding and allied processes. Equipment for capture and separation of welding fume Requirements for testing and marking of separation efficiency |
| EN ISO 15012-1:2013 | Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: Requirements for testing and marking of separation efficiency (ISO 15012-1:2013) |
| I.S. EN ISO 15012-4:2016 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 4: GENERAL REQUIREMENTS (ISO 15012-4:2016) |
| PD ISO/TR 18569:2004 | Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
| UNE-EN 12779:2016 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| ISO 15012-1:2013 | Health and safety in welding and allied processes Equipment for capture and separation of welding fume Part 1: Requirements for testing and marking of separation efficiency |
| EN 1093-1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods |
| ISO 5168:2005 | Measurement of fluid flow — Procedures for the evaluation of uncertainties |
| ISO 7145:1982 | Determination of flowrate of fluids in closed conduits of circular cross-section Method of velocity measurement at one point of the cross-section |
| EN 481:1993 | Workplace atmospheres - Size fraction definitions for measurement of airborne particles |
| EN 292-1 : 1991 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY |
| ISO 4053-1:1977 | Measurement of gas flow in conduits — Tracer methods — Part 1: General |
| ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
| ENV 1070 : 1993 | SAFETY OF MACHINERY - TERMINOLOGY |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| ISO 3966:2008 | Measurement of fluid flow in closed conduits Velocity area method using Pitot static tubes |
| ISO 4006:1991 | Measurement of fluid flow in closed conduits — Vocabulary and symbols |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.