EN 1081:1998
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Resilient floor coverings - Determination of the electrical resistance
Superseded date
21-02-2022
Superseded by
Published date
21-01-1998
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Definitions
4 Sampling
5 Apparatus and reagents
6 Method A - For vertical resistance, R[1]
7 Method B - For resistance to earth, R[2]
8 Method C - For surface resistance, R[3]
9 Calculation and expression of results
10 Test report
This European Standard specifies the determination for the vertical resistance of a floor covering, one determination for the surface resistance of a floor covering and one determination for the resistance to earth of a floor covering after installation.
| Committee |
CEN/TC 134
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PN EN 1081 : 2001 | Identical |
| UNE-EN 1081:1998 | Identical |
| I.S. EN 1081:1998 | Identical |
| BS EN 1081:1998 | Identical |
| NS EN 1081 : 1ED 1998 | Identical |
| ONORM EN 1081 : 1998 | Identical |
| NS EN 1081 : 2018 | Identical |
| BS EN 1081:2018 | Identical |
| SN EN 1081 : 1998 | Identical |
| NBN EN 1081 : 1998 | Identical |
| DIN EN 1081:2019-03 | Identical |
| UNI EN 1081 : 2001 | Identical |
| I.S. EN 1081:2018 | Identical |
| NEN EN 1081 : 1998 | Identical |
| PN EN 1081:2019-01 | Identical |
| DIN EN 1081:1998-04 | Identical |
| NF EN 1081 : 1998 | Identical |
| I.S. EN 686:2011 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM ON A FOAM BACKING |
| NF EN 50348 : 2010 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| PREN 50050-1 : DRAFT 2011 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
| I.S. EN 548:2011 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM |
| 10/30228443 DC : 0 | BS EN 650 - RESILIENT FLOOR COVERINGS - POLYVINYL CHLORIDE FLOOR COVERINGS ON JUTE BACKING OR ON POLYESTER FELT BACKING OR ON POLYESTER FELT WITH POLYVINYL CHLORIDE BACKING - SPECIFICATION |
| I.S. EN 12104:2000 | RESILIENT FLOOR COVERINGS - CORK FLOOR TILES - SPECIFICATION |
| I.S. EN 654:2011 | RESILIENT FLOOR COVERINGS - SEMI-FLEXIBLE POLYVINYL CHLORIDE TILES - SPECIFICATION |
| 10/30231775 DC : DRAFT SEP 2010 | BS EN 687 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM ON A CORKMENT BACKING |
| 11/30248849 DC : 0 | BS EN 50050-3:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
| UNE-EN 50050-2:2014 | Electrostatic hand-held spraying equipment - Safety requirements - Part 2: Hand-held spraying equipment for ignitable coating powder |
| BS EN 50050-1:2013 | Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable liquid coating materials |
| 09/30210239 DC : 0 | BS EN 1817 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR HOMOGENEOUS AND HETEROGENEOUS SMOOTH RUBBER FLOOR COVERINGS |
| PREN 12199 : DRAFT 2009 | RESILIENT FLOOR COVERINGS - SPECIFICATIONS FOR HOMOGENEOUS AND HETEROGENEOUS RELIEF RUBBER FLOOR COVERINGS |
| PREN 12104 : DRAFT 2017 | RESILIENT FLOOR COVERINGS - CORK FLOOR TILES - SPECIFICATION |
| I.S. EN 16893:2018 | CONSERVATION OF CULTURAL HERITAGE - SPECIFICATIONS FOR LOCATION, CONSTRUCTION AND MODIFICATION OF BUILDINGS OR ROOMS INTENDED FOR THE STORAGE OR USE OF HERITAGE COLLECTIONS |
| ISO 10575:2012 | Resilient floor coverings — Specification for rubber sheet floor coverings with backing |
| DD CEN/TS 15398:2006 | Resilient, textile and laminate floor coverings. Floor covering standard symbols |
| I.S. EN 50176:2009 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| S.R. CEN/TS 15398:2016 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS - COMPLEMENTARY ELEMENT |
| CEI EN 60079-32-2 : 2016 | EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS |
| PD CLC/TR 60079-32-1:2015 | Explosive atmospheres Electrostatic hazards, guidance |
| UNI EN ISO 10581 : 2014 | RESILIENT FLOOR COVERINGS - HOMOGENEOUS POLY(VINYL CHLORIDE) FLOOR COVERING - SPECIFICATIONS |
| UNE-EN 50050-3:2014 | Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock |
| EN 14565:2004 | Resilient floor coverings - Floor coverings based upon synthetic thermoplastic polymers - Specification |
| I.S. EN ISO 10582:2018 | RESILIENT FLOOR COVERINGS - HETEROGENEOUS POLY(VINYL CHLORIDE) FLOOR COVERINGS - SPECIFICATION (ISO 10582:2017) |
| CEN/TS 15398:2016 | Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element |
| UNE-EN 653:2012 | Resilient floor coverings - Expanded (cushioned) polyvinyl chloride floor coverings - Specification |
| DIN EN 1504-2:2015-03 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| DIN EN 13415:2010-05 | TEST OF ADHESIVE FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| BS EN 548:2011 | Resilient floor coverings. Specification for plain and decorative linoleum |
| UNE-EN 688:2011 | Resilient floor coverings - Specification for corklinoleum |
| BS EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components |
| BS EN 654:2011 | Resilient floor coverings. Semi-flexible polyvinyl chloride tiles. Specification |
| UNE-EN 655:2011 | Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification |
| UNE-EN 1817:2011 | Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings |
| ISO 26986:2010 | Resilient floor coverings Expanded (cushioned) poly(vinyl chloride) floor covering Specification |
| BS EN 13845:2017 | Resilient floor coverings. Polyvinyl chloride floor coverings with particle based enhanced slip resistance. Specification |
| I.S. EN 652:2011 | RESILIENT FLOOR COVERINGS - POLYVINYL CHLORIDE FLOOR COVERINGS WITH CORK-BASED BACKING - SPECIFICATION |
| EN 13415:2010 | Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites |
| EN 13413:2001 | Resilient floor coverings - Polyvinyl chloride floor coverings on a filled fibrous backing - Specification |
| DIN EN 13813:2003-01 | SCREED MATERIAL AND FLOOR SCREEDS - SCREED MATERIALS - PROPERTIES AND REQUIREMENTS |
| DIN EN 14041:2008-05 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| EN 50176:2009 | Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements |
| EN 50177:2009/A1:2012 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS |
| DIN EN 14879-2:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN 12104:2000 | Resilient floor coverings - Cork floor tiles - Specification |
| DIN EN ISO 10581:2014-02 | RESILIENT FLOOR COVERINGS - HOMOGENEOUS POLY(VINYL CHLORIDE) FLOOR COVERING - SPECIFICATIONS (ISO 10581:2011) |
| DIN EN 686:2011-07 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM ON A FOAM BACKING |
| EN 60079-32-2:2015 | Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests |
| EN 50050-3:2013 | Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock |
| EN 12186:2014 | Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements |
| EN 13213:2001 | Hollow floors |
| 15/30318203 DC : 0 | BS ISO 20326 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR FLOOR PANELS FOR LOOSE LAYING |
| BS EN 60079-32-2:2015 | Explosive atmospheres Electrostatics hazards. Tests |
| I.S. EN 653:2011 | RESILIENT FLOOR COVERINGS - EXPANDED (CUSHIONED) POLYVINYL CHLORIDE FLOOR COVERINGS - SPECIFICATION |
| UNE-EN ISO 10582:2012 | Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor coverings - Specification (ISO 10582:2010) |
| UNI EN ISO 10595 : 2012 | RESILIENT FLOOR COVERINGS - SEMI-FLEXIBLE/VINYLCOMPOSITION (VCT) POLY(VINYL CHLORIDE) FLOOR TILES - SPECIFICATION |
| I.S. EN 649:2011 | RESILIENT FLOOR COVERINGS - HOMOGENEOUS AND HETEROGENEOUS POLYVINYL CHLORIDE FLOOR COVERINGS - SPECIFICATION |
| BS EN ISO 24011:2012 | Resilient floor coverings. Specification for plain and decorative linoleum |
| 11/30248842 DC : 0 | BS EN 50050-1:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
| BS EN ISO 26986:2012 | Resilient floor coverings. Expanded (cushioned) poly(vinyl chloride) floor covering. Specification Expanded (cushioned) poly(vinyl chloride) floor covering - Specification (ISO 26986:2010) |
| 08/30180312 DC : DRAFT MAR 2008 | BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| PD CEN/TS 15398:2016 | Resilient, textile and laminate floor coverings. Floor covering standard symbols. Complementary element |
| 09/30200088 DC : 0 | BS EN 14879-6 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS |
| DIN EN 14879-6:2010-04 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers |
| 10/30230365 DC : 0 | BS EN 50050-2 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| BS EN 14879-6:2009 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Combined linings with tile and brick layers |
| BS EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material. Safety requirements |
| CEI EN 50176 : 2010 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| 04/30109201 DC : DRAFT OCT 2004 | EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
| UNE-EN ISO 10581:2014 | Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10581:2011) |
| PREN 13845 : DRAFT 2015 | RESILIENT FLOOR COVERINGS - POLYVINYL CHLORIDE FLOOR COVERINGS WITH PARTICLE BASED ENHANCED SLIP RESISTANCE - SPECIFICATION |
| S.R. CLC/TR 60079-32-1:2015 | EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE |
| PREN 548 : DRAFT 2010 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM |
| DIN EN 16776:2016-09 | RESILIENT FLOOR COVERINGS - HETEROGENEOUS POLYURETHANE FLOOR COVERINGS - SPECIFICATION |
| PREN 13813 : DRAFT 2017 | SCREED MATERIAL AND FLOOR SCREEDS - SCREED MATERIAL - PROPERTIES AND REQUIREMENTS |
| I.S. EN 14041:2018 | RESILIENT, TEXTILE, LAMINATE AND MODULAR MULTILAYER FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| I.S. EN 16776:2016 | RESILIENT FLOOR COVERINGS - HETEROGENEOUS POLYURETHANE FLOOR COVERINGS - SPECIFICATION |
| I.S. EN 50177:2009 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS |
| UNE-EN 686:2011 | Resilient floor coverings - Specification for plain and decorative linoleum on a foam backing |
| I.S. EN 14565:2004 | RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION |
| DIN EN 14565:2004-09 | RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION |
| BS EN 686:2011 | Resilient floor coverings. Specification for plain and decorative linoleum on a foam backing |
| BS EN 649:2011 | Resilient floor coverings. Homogenous and heterogenous polyvinyl chloride floor coverings. Specification |
| UNE-EN 12186:2015 | Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements |
| BS EN 1817:2010 | Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings |
| UNI EN 12199 : 2010 | RESILIENT FLOOR COVERINGS - SPECIFICATIONS FOR HOMOGENEOUS AND HETEROGENEOUS RELIEF RUBBER FLOOR COVERINGS |
| ICC 2012 INTERNATIONAL BUILDING CODE : 2012 | INTERNATIONAL BUILDING CODE |
| I.S. EN 688:2011 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR CORKLINOLEUM |
| I.S. EN 12186:2014 | GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
| I.S. EN 651:2011 | RESILIENT FLOOR COVERINGS - POLYVINYL CHLORIDE FLOOR COVERINGS WITH FOAM LAYER - SPECIFICATION |
| I.S. EN 655:2011 | RESILIENT FLOOR COVERINGS - TILES OF AGGLOMERATED COMPOSITION CORK WITH POLYVINYL CHLORIDE WEAR LAYER - SPECIFICATION |
| I.S. EN 650:2012 | RESILIENT FLOOR COVERINGS - POLYVINYL CHLORIDE FLOOR COVERINGS ON JUTE BACKING OR ON POLYESTER FELT BACKING OR ON A POLYESTER FELT WITH A POLYVINYL CHLORIDE BACKING - SPECIFICATION |
| I.S. EN 13845:2017 | RESILIENT FLOOR COVERINGS - POLYVINYL CHLORIDE FLOOR COVERINGS WITH PARTICLE BASED ENHANCED SLIP RESISTANCE - SPECIFICATION |
| DIN EN 1817:2010-11 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR HOMOGENEOUS AND HETEROGENEOUS SMOOTH RUBBER FLOOR COVERINGS |
| UNI EN 651 : 2011 | RESILIENT FLOOR COVERINGS - POLYVINYL CHLORIDE FLOOR COVERINGS WITH FOAM LAYER - SPECIFICATION |
| VDI 2083 Blatt 17:2013-06 | Cleanroom technology - Compatibility of materials with the required cleanliness |
| VDI 2083 Blatt 18:2012-01 | Cleanroom technology - Biocontamination control |
| VDI 2083 Blatt 9.1:2006-12 | Clean room technology - Compatibility with required cleanliness and surface cleanliness |
| CEI EN 50050-2 : 2014 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| 10/30228449 DC : 0 | BS EN 652 - RESILIENT FLOOR COVERINGS - POLYVINYL CHLORIDE FLOOR COVERINGS WITH CORK-BASED BACKING - SPECIFICATION |
| PREN 50223 : DRAFT 2013 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| BS ISO 20326 : 2016 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR FLOOR PANELS/ASSEMBLY FOR LOOSE LAYING |
| 14/30260383 DC : 0 | BS ISO 16905 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR RUBBER FLOOR COVERING - TILE/PLANK |
| 13/30284894 DC : 0 | BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| PD CEN/CLC/TR 16832:2015 | Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks) |
| 12/30260333 DC : 0 | BS EN 650 - RESILIENT FLOOR COVERINGS - POLYVINYL CHLORIDE FLOOR COVERINGS ON JUTE BACKING OR ON POLYESTER FELT BACKING OR ON POLYESTER FELT WITH POLYVINYL CHLORIDE BACKING - SPECIFICATION |
| 09/30179605 DC : 0 | BS ISO 10581 - RESILIENT FLOOR COVERINGS - HOMOGENEOUS POLY(VINYL CHLORIDE) FLOOR COVERING - SPECIFICATION |
| BS EN 50050-2:2013 | Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable coating powder |
| 11/30244187 DC : 0 | BS EN 14041 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| BS EN 16776:2016 | Resilient floor coverings. Heterogeneous polyurethane floor coverings. Specification |
| ISO 3813:2004 | Resilient floor coverings Cork floor tiles Specification |
| 11/30248856 DC : 0 | BS EN 50059:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - HAND-HELD SPRAYING EQUIPMENT FOR NON-IGNITABLE COATING MATERIALS |
| BS PD CEN/TR 16832 : 2015 | SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS) |
| DIN EN ISO 26986:2012-04 | Resilient floor coverings - Expanded (cushioned) poly(vinyl chloride) floor covering - Specification (ISO 26986:2010) |
| 10/30229922 DC : DRAFT SEP 2010 | BS EN 686 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM ON A FOAM BACKING |
| 10/30229916 DC : DRAFT SEP 2010 | BS EN 654 - RESILIENT FLOOR COVERINGS - SEMI-FLEXIBLE POLYVINYL CHLORIDE TILES - SPECIFICATION |
| BS EN ISO 10595:2012 | Resilient floor coverings. Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles. Specification |
| 09/30179615 DC : 0 | BS ISO 10595 - RESILIENT FLOOR COVERINGS - SEMI-FLEXIBLE/VINYLCOMPOSITION (VCT) POLY(VINYL CHLORIDE) FLOOR TILES - SPECIFICATION |
| CEI EN 50050-1 : 2014 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
| BS EN 50050-3:2013 | Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable flock |
| UNE-EN 50176:2010 | Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements |
| BS EN 50348:2010 | Stationary electrostatic application equipment for non-ignitable liquid coating material. Safety requirements |
| 10/30228437 DC : 0 | BS EN 548 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM |
| 02/124567 DC : DRAFT DEC 2002 | BS ISO 3813 - RESILIENT FLOOR COVERINGS - CORK FLOOR TILES - SPECIFICATION |
| PREN 649 : DRAFT 2010 | RESILIENT FLOOR COVERINGS - HOMOGENOUS AND HETEROGENOUS POLYVINYL CHLORIDE FLOOR COVERINGS - SPECIFICATION |
| UNI EN ISO 26986 : 2012 | RESILIENT FLOOR COVERINGS - EXPANDED (CUSHIONED) POLY(VINYL CHLORIDE) FLOOR COVERING - SPECIFICATION |
| UNE-EN 16776:2016 | Resilient floor coverings - Heterogeneous polyurethane floor coverings - Specification |
| ISO/TS 19880-1:2016 | Gaseous hydrogen Fuelling stations Part 1: General requirements |
| S.R. CEN/CLC/TR 16832:2015&LC:2015 | SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS) |
| I.S. EN 50050-2:2013 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| UNI EN ISO 24011 : 2012 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM |
| ISO/TS 20100:2008 | Gaseous hydrogen Fuelling stations |
| ISO 10577:2012 | Resilient floor coverings — Specification for rubber sheet floor coverings without backing |
| I.S. EN ISO 10595:2012 | RESILIENT FLOOR COVERINGS - SEMIFLEXIBLE/VINYLCOMPOSITION (VCT) POLY(VINYL CHLORIDE) FLOOR TILES - SPECIFICATION (ISO 10595:2010) |
| CEN/CLC/TR 16832:2015 | Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks) |
| I.S. EN 60079-32-2:2015 | EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS |
| I.S. EN 50348:2010 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| I.S. EN ISO 26986:2012 | RESILIENT FLOOR COVERINGS - EXPANDED (CUSHIONED) POLY(VINYL CHLORIDE) FLOOR COVERING - SPECIFICATION (ISO 26986:2010) |
| UNE-EN 687:2011 | Resilient floor coverings - Specification for plain and decorative linoleum on a corkment backing |
| EN 687:2011 | Resilient floor coverings - Specification for plain and decorative linoleum on a corkment backing |
| PREN 50059 : DRAFT 2011 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - HAND-HELD SPRAYING EQUIPMENT FOR NON-IGNITABLE COATING MATERIALS |
| NF EN 13415 : 2010 | TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| DIN EN 12186:2014-12 | GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
| DIN EN 653:2011-07 | RESILIENT FLOOR COVERINGS - EXPANDED (CUSHIONED) POLYVINYL CHLORIDE FLOOR COVERINGS - SPECIFICATION |
| ISO 24011:2009 | Resilient floor coverings Specification for plain and decorative linoleum |
| BS EN 14521:2004 | Resilient floor coverings. Specification for smooth rubber floor coverings with or without foam backing with a decorative layer |
| BS EN 12199:2010 | Resilient floor coverings. Specifications for homogeneous and heterogeneous relief rubber floor coverings |
| BS EN 653:2011 | Resilient floor coverings. Expanded (cushioned) polyvinyl chloride floor coverings. Specification |
| BS EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
| BS EN 13213:2001 | Hollow floors |
| UNE-EN 13415:2010 | Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites |
| BS EN 12104:2000 | Resilient floor coverings. Cork floor tiles. Specification |
| 18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
| BS EN 688:2011 | Resilient floor coverings. Specification for corklinoleum |
| ICC IBC CODE AND COMMENTARY VOLUME 2 : 2015 | IBC® Code and Commentary, Volume 2 |
| ICC 2012 INTERNATIONAL FIRE CODE : 2012 | INTERNATIONAL FIRE CODE |
| UNE-EN 654:2012 | Resilient floor coverings - Semi-flexible polyvinyl chloride tiles - Specification |
| ICC IFC CODE & COMMENTARY VOLUME 1 & 2 : 2015 | IFC® Code and Commentary |
| DIN EN 1504-2:2005-01 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
| UNI EN 1817 : 2010 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR HOMOGENEOUS AND HETEROGENEOUS SMOOTH RUBBER FLOOR COVERINGS |
| UNE-EN 548:2011 | Resilient floor coverings - Specification for plain and decorative linoleum |
| EN 652:2011 | Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing - Specification |
| EN 651:2011 | Resilient floor coverings - Polyvinyl chloride floor coverings with foam layer - Specification |
| UNI EN 12186 : 2014 | GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS |
| UNI EN 649 : 2011 | RESILIENT FLOOR COVERINGS - HOMOGENOUS AND HETEROGENOUS POLYVINYL CHLORIDE FLOOR COVERINGS - SPECIFICATION |
| UNI EN 653 : 2011 | RESILIENT FLOOR COVERINGS - EXPANDED (CUSHIONED) POLYVINYL CHLORIDE FLOOR COVERINGS - SPECIFICATION |
| UNI EN 548 : 2011 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM |
| UNI EN 654 : 2011 | RESILIENT FLOOR COVERINGS SEMI-FLEXIBLE POLYVINYL CHLORIDE TILES SPECIFICATION |
| UNI EN 652 : 2011 | RESILIENT FLOOR COVERINGS - POLYVINYL CHLORIDE FLOOR COVERINGS WITH CORK-BASED BACKING - SPECIFICATION |
| UNI EN 13415 : 2010 | TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| UNI EN 686 : 2011 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM ON A FOAM BACKING |
| UNI EN 650 : 2012 | RESILIENT FLOOR COVERINGS - POLYVINYL CHLORIDE FLOOR COVERINGS ON JUTE BACKING OR ON POLYESTER FELT BACKING OR ON A POLYESTER FELT WITH A POLYVINYL CHLORIDE BACKING - SPECIFICATION |
| UNI EN 655 : 2011 | RESILIENT FLOOR COVERINGS - TILES OF AGGLOMERATED COMPOSITION CORK WITH POLYVINYL CHLORIDE WEAR LAYER - SPECIFICATION |
| UNI EN 14879-6 : 2010 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS |
| UNI EN 688 : 2011 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR CORKLINOLEUM |
| UNE-EN 50223:2016 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
| BS EN 50176:2009 | Stationary electrostatic application equipment for ignitable liquid coating material. Safety requirements |
| 10/30228446 DC : 0 | BS EN 651 - RESILIENT FLOOR COVERINGS - POLYVINYL CHLORIDE FLOOR COVERINGS WITH FOAM LAYER - SPECIFICATION |
| ISO 19322:2018 | Resilient floor coverings — Specification for floor coverings based on thermoplastic polymers |
| I.S. CEN TS 15398:2006 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS |
| BS EN ISO 10582:2018 | Resilient floor coverings. Heterogeneous poly(vinyl chloride) floor covering. Specifications |
| 00/124250 DC : DRAFT NOV 2000 | BS EN 14041 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - HEALTH, SAFETY AND ENERGY-SAVING REQUIREMENTS |
| 15/30325178 DC : 0 | BS EN 13845 - RESILIENT FLOOR COVERINGS - POLYVINYL CHLORIDE FLOOR COVERINGS WITH PARTICLE BASED ENHANCED SLIP RESISTANCE - SPECIFICATION |
| 09/30176641 DC : 0 | BS ISO 10577 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR RUBBER SHEET FLOOR COVERINGS WITHOUT BACKING |
| 06/30155368 DC : 0 | PREN 14879-6 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS |
| 10/30228440 DC : 0 | BS EN 649 - RESILIENT FLOOR COVERINGS - HOMOGENOUS AND HETEROGENOUS POLYVINYL CHLORIDE FLOOR COVERINGS - SPECIFICATION |
| PREN 50050-3 : DRAFT 2011 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
| PREN 50050-2 : DRAFT 2011 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| 09/30179608 DC : 0 | BS ISO 10582 - RESILIENT FLOOR COVERINGS - HETEROGENEOUS POLY(VINYL CHLORIDE) FLOOR COVERINGS - SPECIFICATION |
| BS ISO 10575:2012 | Resilient floor coverings. Specification for rubber sheet floor coverings with backing |
| 15/30303016 DC : 0 | BS EN ISO 10582 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR HETEROGENEOUS VINYL FLOORING TO INCLUDE LUXURY VINYL TILE REQUIREMENTS |
| CEN/TR 16832 : 2015 COR 2015 | SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS) |
| 11/30248845 DC : 0 | BS EN 50050-2:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| 07/30167352 DC : DRAFT AUG 2007 | BS EN 13415 - TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| 09/30176638 DC : 0 | BS ISO 10575 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR RUBBER SHEET FLOOR COVERING WITH BACKING |
| 02/123818 DC : DRAFT OCT 2002 | BS EN 14565 - RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION |
| ISO 16905:2015 | Resilient floor coverings Specification for rubber floor covering Tile/Plank |
| BS EN 50177 : 2009 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS |
| DIN EN 14041:2016-07 (Draft) | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| I.S. EN 687:2011 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM ON A CORKMENT BACKING |
| I.S. EN ISO 10581:2013 | RESILIENT FLOOR COVERINGS - HOMOGENEOUS POLY(VINYL CHLORIDE) FLOOR COVERING - SPECIFICATIONS (ISO 10581:2011) |
| I.S. EN 14879-6:2009 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS |
| BS PD IEC TS 60079-32-1 : 2013 | EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS, GUIDANCE |
| 17/30359856 DC : 0 | BS EN 12104 - RESILIENT FLOOR COVERINGS - CORK FLOOR TILES - SPECIFICATION |
| UNI EN 687 : 2011 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM ON A CORKMENT BACKING |
| BS EN 687:2011 | Resilient floor coverings. Specification for plain and decorative linoleum on a corkment backing |
| PREN 652 : DRAFT 2010 | RESILIENT FLOOR COVERINGS - POLYVINYL CHLORIDE FLOOR COVERINGS WITH CORK-BASED BACKING - SPECIFICATION |
| PREN 650 : DRAFT 2012 | RESILIENT FLOOR COVERINGS - POLYVINYL CHLORIDE FLOOR COVERINGS ON JUTE BACKING OR ON POLYESTER FELT BACKING OR ON POLYESTER FELT WITH POLYVINYL CHLORIDE BACKING - SPECIFICATION |
| PREN 14041 : DRAFT 2016 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| UNE-EN 50050-1:2014 | Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials |
| ISO 11638:2012 | Resilient floor coverings Heterogeneous poly(vinyl chloride) flooring on foam Specification |
| EN ISO 10582:2018 | Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10582:2017) |
| ISO 10582:2017 | Resilient floor coverings — Heterogeneous poly(vinyl chloride) floor covering — Specifications |
| DIN EN 654:2011-07 | RESILIENT FLOOR COVERINGS - SEMI-FLEXIBLE POLYVINYL CHLORIDE TILES - SPECIFICATION |
| DIN EN 649:2011-05 | RESILIENT FLOOR COVERINGS - HOMOGENEOUS AND HETEROGENEOUS POLYVINYL CHLORIDE FLOOR COVERINGS - SPECIFICATION |
| BS EN 650:2012 | Resilient floor coverings. Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing. Specification |
| UNE-EN 1504-2:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| BS EN 12186:2014 | Gas infrastructure. Gas pressure regulating stations for transmission and distribution. Functional requirements |
| EN 1817:2010 | Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings |
| EN 12199:2010 | Resilient floor coverings - Specifications for homogeneous and heterogeneous relief rubber floor coverings |
| I.S. EN 1817:2010 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR HOMOGENEOUS AND HETEROGENEOUS SMOOTH RUBBER FLOOR COVERINGS |
| BS EN 13413:2002 | Resilient floor coverings. Polyvinyl chloride floor coverings on a filled fibrous backing. Specification |
| BS EN 14565:2004 | Resilient floor coverings. Floor coverings based upon synthetic thermoplastic polymers. Specification |
| UNE-EN 12199:2011 | Resilient floor coverings - Specifications for homogeneous and heterogeneous relief rubber floor coverings |
| 11/30211394 DC : DRAFT MAR 2011 | BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS |
| BS EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
| ISO 10581:2011 | Resilient floor coverings Homogeneous poly(vinyl chloride) floor covering Specifications |
| I.S. EN 13415:2010 | TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| BS EN 13813:2002 | Screed material and floor screeds. Screed material. Properties and requirements |
| I.S. EN 12199:2010 | RESILIENT FLOOR COVERINGS - SPECIFICATIONS FOR HOMOGENEOUS AND HETEROGENEOUS RELIEF RUBBER FLOOR COVERINGS |
| UNE-EN 13845:2017 | Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification |
| BS EN 651:2011 | Resilient floor coverings. Polyvinyl chloride floor coverings with foam layer. Specification |
| BS EN 655:2011 | Resilient floor coverings. Tiles of agglomerated composition cork with polyvinyl chloride wear layer. Specification |
| EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
| EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN 654:2011 | Resilient floor coverings - Semi-flexible polyvinyl chloride tiles - Specification |
| EN 16776:2016 | Resilient floor coverings - Heterogeneous polyurethane floor coverings - Specification |
| EN 650:2012 | Resilient floor coverings - Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing - Specification |
| EN 653:2011 | Resilient floor coverings - Expanded (cushioned) polyvinyl chloride floor coverings - Specification |
| EN 688:2011 | Resilient floor coverings - Specification for corklinoleum |
| EN 14521:2004 | Resilient floor coverings - Specification for smooth rubber floor coverings with or without foam backing with a decorative layer |
| EN 655:2011 | Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification |
| EN 14879-6:2009 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers |
| EN 548:2011 | Resilient floor coverings - Specification for plain and decorative linoleum |
| EN 686:2011 | Resilient floor coverings - Specification for plain and decorative linoleum on a foam backing |
| EN ISO 24011:2012 | Resilient floor coverings - Specification for plain and decorative linoleum (ISO 24011:2009) |
| EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| EN 649:2011 | Resilient floor coverings - Homogenous and heterogenous polyvinyl chloride floor coverings - Specification |
| EN 13813:2002 | Screed material and floor screeds - Screed material - Properties and requirements |
| BS EN ISO 10581:2013 | Resilient floor coverings. Homogeneous poly(vinyl chloride) floor covering. Specifications |
| PREN 651 : DRAFT 2010 | RESILIENT FLOOR COVERINGS - POLYVINYL CHLORIDE FLOOR COVERINGS WITH FOAM LAYER - SPECIFICATION |
| PREN 1817 : DRAFT 2009 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR HOMOGENEOUS AND HETEROGENEOUS SMOOTH RUBBER FLOOR COVERINGS |
| 18/30370202 DC : 0 | BS EN ISO 10581 - RESILIENT FLOOR COVERINGS - HOMOGENEOUS POLY(VINYL CHLORIDE) FLOOR COVERING - SPECIFICATIONS |
| UNE-EN 50177:2010 | Stationary electrostatic application equipment for ignitable coating powders - Safety requirements |
| BS ISO 10577:2012 | Resilient floor coverings. Specification for rubber sheet floor coverings without back |
| 10/30229919 DC : DRAFT SEP 2010 | BS EN 655 - RESILIENT FLOOR COVERINGS - TILES OF AGGLOMERATED COMPOSITION CORK WITH POLYVINYL CHLORIDE WEAR LAYER - SPECIFICATION |
| DIN EN ISO 24011:2012-04 | Resilient floor coverings - Specification for plain and decorative linoleum (ISO 24011:2009) |
| 10/30229043 DC : DRAFT SEP 2010 | BS EN 653 - RESILIENT FLOOR COVERINGS - EXPANDED (CUSHIONED) POLYVINYL CHLORIDE FLOOR COVERINGS - SPECIFICATION |
| 10/30231778 DC : DRAFT SEP 2010 | BS EN 688 - RESILIENT FLOOR COVERINGS - SPECIFICATION FOR CORKLINOLEUM |
| CEI EN 50050-3 : 2014 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
| 09/30210233 DC : 0 | BS EN 12199 - RESILIENT FLOOR COVERINGS - SPECIFICATIONS FOR HOMOGENEOUS AND HETEROGENEOUS RELIEF RUBBER FLOOR COVERINGS |
| I.S. EN ISO 24011:2012 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM (ISO 24011:2009) |
| I.S. EN 50050-1:2013 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
| 16/30339855 DC : 0 | BS EN 14041 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| 04/30123574 DC : DRAFT OCT 2004 | EN 14879-3 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
| 03/112800 DC : DRAFT AUG 2003 | BS EN 13845 - RESILIENT FLOOR COVERINGS - POLYVINYL CHLORIDE FLOOR COVERINGS WITH ENHANCED SLIP RESISTANCE - SPECIFICATION |
| 14/30302995 DC : 0 | BS EN 16776 - RESILIENT FLOOR COVERINGS - HOMOGENEOUS AND HETEROGENEOUS POLYURETHANE FLOOR COVERINGS - SPECIFICATION |
| BS ISO 16905 : 2015 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR RUBBER FLOOR COVERING - TILE/PLANK |
| 00/103366 DC : DRAFT APR 2000 | PREN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS |
| DIN 28054-1:2000-09 | CHEMICAL APPARATUS - COATING WITH ORGANIC MATERIALS FOR METALLIC COMPONENTS - PART 1: REQUIREMENTS AND TESTING |
| I.S. EN 50050-3:2013 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
| ISO 20326:2016 | Resilient floor coverings — Specification for floor panels/assembly for loose laying |
| CEI EN 50348 : 2011 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| UNE-EN ISO 10595:2012 | Resilient floor coverings - Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles - Specification (ISO 10595:2010) |
| EN 16893:2018 | Conservation of Cultural Heritage - Specifications for location, construction and modification of buildings or rooms intended for the storage or use of heritage collections |
| UNE-EN ISO 24011:2012 | Resilient floor coverings - Specification for plain and decorative linoleum (ISO 24011:2009) |
| CLC/TR 60079-32-1:2015 | Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance |
| DIN EN 12199:2010-11 | RESILIENT FLOOR COVERINGS - SPECIFICATIONS FOR HOMOGENEOUS AND HETEROGENEOUS RELIEF RUBBER FLOOR COVERINGS |
| I.S. EN 50223:2015 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| EN ISO 10581:2013 | Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10581:2011) |
| UNE-EN 60079-32-2:2016 | Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests |
| BS EN 13415:2002 | Adhesives. Test of adhesives for floor coverings. Determination of the electrical resistance of adhesive films |
| DD ISO/TS 20100:2008 | Gaseous hydrogen. Fuelling stations |
| BS EN 652:2011 | Resilient floor coverings. Polyvinyl chloride floor coverings with cork-based backing. Specification |
| BS EN 12825:2001 | Raised access floors |
| ISO 10595:2010 | Resilient floor coverings Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles Specification |
| DIN EN 548:1997-09 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM |
| DIN EN 649:2004-01 | RESILIENT FLOOR COVERINGS - HOMOGENEOUS AND HETEROGENEOUS POLYVINYL CHLORIDE FLOOR COVERINGS - SPECIFICATION |
| EN 50348:2010 | Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements |
| DIN EN 688:2011-07 | Resilient floor coverings - Specification for corklinoleum |
| DIN EN 687:2011-07 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM ON A CORKMENT BACKING |
| DIN EN 651:2011-05 | Resilient floor coverings - Polyvinyl chloride floor coverings with foam layer - Specification |
| DIN EN 14879-3:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 12825:2001 | Raised access floors |
| DIN EN 548:2011-05 | RESILIENT FLOOR COVERINGS - SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM |
| DIN EN 652:2011-06 | Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing - Specification |
| DIN EN 655:2011-07 | Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification |
| DIN EN 654:2004-01 | RESILIENT FLOOR COVERINGS - SEMI-FLEXIBLE POLYVINYL CHLORIDE TILES - SPECIFICATION |
| DIN EN 14521:2004-09 | Resilient floor coverings - Specification for smooth rubber floor coverings with or without foam backing with a decorative layer |
| DIN EN 653:1997-01 | RESILIENT FLOOR COVERINGS - EXPANDED (CUSHIONED) POLYVINYL CHLORIDE FLOOR COVERINGS - SPECIFICATION |
| DIN EN ISO 10595:2012-04 | RESILIENT FLOOR COVERINGS - SEMI-FLEXIBLE/VINYLCOMPOSITION(VCT) POLY(VINYL CHLORIDE) FLOOR TILES - SPECIFICATION (ISO 10595:2010) |
| DIN EN 650:2012-12 | Resilient floor coverings - Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with polyvinyl chloride backing - Specification; German version EN 650:2012 |
| EN 50050-2:2013 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| EN 50050-1:2013 | Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials |
| ICC IBC INTERNATIONAL BUILDING CODE:2021 | International Building Code |
| IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.