EN 10226-1:2004
Current
Current
The latest, up-to-date edition.
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
Published date
14-07-2004
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and explanations
5 Dimensions
6 Designation
7 Thread design
7.1 Thread form
7.2 Thread lengths
8 Gauging
9 Combination with fastening thread
Bibliography
This part of EN 10226 specifies the requirements for thread form, dimensions, tolerances and designation for jointing pipe threads, sizes 1/16 to 6 inclusive, for joints made pressure tight by the mating of the threads. These threads are taper external (designated by R) and parallel internal (designated by Rp) and are intended for use with pipes suitable for threading and for valves, fittings or other pipeline equipments interconnected by threaded joints.
| Committee |
CEN/TC 459/SC 10
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 10226-1 : 2004 | Identical |
| I.S. EN 10226-1:2004 | Identical |
| NBN EN 286-1 : 1998 AMD 2 2006 | Identical |
| PN EN 10226-1 : 2006 | Identical |
| BS EN 10226-1:2004 | Identical |
| NEN EN 10226-1 : 2004 | Identical |
| SN EN 10226-1 : 2004 | Identical |
| UNE-EN 10226-1:2004 | Identical |
| UNI EN 10226-1 : 2006 | Identical |
| NBN EN 10226-1 : 2004 | Identical |
| NS EN 10226-1 : 1ED 2004 | Identical |
| DIN EN 10226-1:2004-10 | Identical |
| IEEE C57.12.10-2010 REDLINE | IEEE Standard Requirements for Liquid-Immersed Power Transformers |
| DIN EN 16125:2016-03 | LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| 13/30281974 DC : 0 | BS EN 16617 - PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
| 13/30286091 DC : 0 | BS EN 16678 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA |
| BS EN 16678:2015 | Safety and control devices for gas burners and gas burning appliances. Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| PREN 1487 : DRAFT 2012 | BUILDING VALVES - HYDAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
| 15/30324138 DC : 0 | BS EN ISO 15876-3 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 3: FITTINGS |
| 11/30238482 DC : 0 | BS EN 1458-1 - DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY |
| BS EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| 12/30259203 DC : 0 | BS EN 12007-5 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 5: SERVICE LINES, SPECIFIC FUNCTIONAL REQUIREMENTS |
| UNI EN ISO 21003-3 : 2009 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 3: FITTINGS |
| I.S. EN 334:2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| I.S. EN 16722:2015 | INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR VALVES WITH THREADED ENDS |
| 05/30128654 DC : DRAFT FEB 2005 | EN 1775 - GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS |
| DIN EN 16617:2015-07 | PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
| 10/30234616 DC : 0 | BS EN 14420-7 - HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
| PREN 624 : DRAFT 2009 | SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS |
| I.S. EN ISO 15877-3:2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 3: FITTINGS |
| I.S. EN 12007-5:2014 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 5: SERVICE LINES - SPECIFIC FUNCTIONAL REQUIREMENTS |
| ISO 15348:2002 | Pipework Metal bellows expansion joints General |
| DIN 30690-1:2016-04 | CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
| 17/30363956 DC : 0 | BS EN 419 - GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| I.S. EN 15502-1:2012 | GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| UNI EN ISO 15877-3 : 2011 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 3: FITTINGS |
| UNE-EN 16678:2016 | Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| EN 14071:2015 | LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment |
| 16/30334287 DC : 0 | BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR |
| DIN EN 334:2016-05 (Draft) | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| UNE-EN 16436-1:2014 | Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings |
| I.S. EN ISO 15874-3:2013 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 3: FITTINGS (ISO 15874-3:2013) |
| I.S. EN 14382:2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| DIN EN 416-1:2009-09 | SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY |
| DIN EN 777-1:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY |
| DIN EN 12007-3:2015-07 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNTIONAL REQUIREMENTS FOR STEEL |
| DIN EN 1124-4:2014-02 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTEWATER SYSTEMS - PART 4: COMPONENTS FOR VACUUM DRAINAGE SYSTEMS AND FOR DRAINAGE SYSTEMS ON SHIPS |
| DIN EN ISO 23553-1:2014-09 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014 |
| DIN EN 26:2015-08 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| DIN EN 777-3:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
| DIN EN 14678-2:2012-04 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 2: Components other than dispensers and installation requirements (includes Amendment A1:2012) |
| UNE-EN 16722:2016 | Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends |
| UNE-EN 525:2010 | Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
| BS EN 15266:2007 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
| BS EN 624:2011 | Specification for dedicated LPG appliances. Room sealed LPG space heating equipment for installation in vehicles and boats |
| BS EN 14420-5:2013 | Hose fittings with clamp units Threaded connections |
| BS EN 416-1:2009 | Single burner gas-fired overhead radiant tube heaters for non-domestic use Safety |
| BS EN 303-5:2012 | Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking |
| BS EN 14382 : 2005 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| BS EN 14678-2 : 2007 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS AND INSTALLATION REQUIREMENTS |
| BS EN 419-1:2009 | Non-domestic gas-fired overhead luminous radiant heaters Safety |
| BS EN 1555-3 : 2010 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 3: FITTINGS |
| BS EN 1458-1:2011 | Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW Safety |
| BS EN 10226-3:2005 | Pipes threads where pressure-tight joints are made on the threads Verification by means of limit gauges |
| BS EN 14420-7:2013 | Hose fittings with clamp units Cam locking couplings |
| I.S. EN 14678-2:2007 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS AND INSTALLATION REQUIREMENTS |
| DIN EN 12828:2003-06 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
| I.S. EN 14424:2013 | HOSE FITTINGS WITH SCREWED FERRULES |
| I.S. EN 89:2015 | GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| EN 16129:2013 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| EN 1123-3:2004 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building |
| EN 12007-5:2014 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements |
| EN 1124-4:2013 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships |
| DIN EN 14543:2017-10 | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE |
| EN 30-1-1:2008+A3:2013 | Domestic cooking appliances burning gas - Part 1-1: Safety - General |
| EN 10311:2005 | Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
| EN 10226-3:2005 | Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges |
| EN 1349:2009 | Industrial process control valves |
| UNI EN 1949 : 2013 | SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES |
| EN 1319:2009 | Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW |
| EN 10226-2:2005 | Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation |
| DIN EN ISO 16330:2004-08 | Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003) |
| BS EN 1349:2009 | Industrial process control valves |
| EN 14423:2013+A1:2016 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| PREN 13774 : DRAFT 2011 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| PREN 498 : DRAFT 2009 | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - BARBECUES FOR OUTDOOR USE CONTACT GRILLS INCLUDED |
| PREN 416 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| BS EN 12007-5:2014 | Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar Service lines. Specific functional requirements |
| BS EN 16129:2013 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| 14/30296044 DC : 0 | BS EN 16722 - INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR VALVES WITH SCREWED ENDS |
| PREN 16129 : DRAFT 2010 | PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 100 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES |
| PREN 17175 : DRAFT 2017 | GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| UNI EN 12007-5 : 2014 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 5: SERVICE LINES - SPECIFIC FUNCTIONAL REQUIREMENTS |
| BS EN 16617:2015 | Pipework. Corrugated metal hose assemblies for combustible gas. Performance requirements, testing and marking |
| DIN EN 12007-5 E : 2014 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 5: SERVICE LINES - SPECIFIC FUNCTIONAL REQUIREMENTS |
| 05/30125032 DC : DRAFT JUL 2005 | EN 14678-2 - LPG EQUIPMENT AND ACCESSORIES - EQUIPMENT FOR LIQUEFIED PETROLEUM GAS AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS, AND INSTALLATION REQUIREMENTS |
| BS EN ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations. Polybutene (PB) Fittings |
| BS ISO 15348:2002 | Pipework. Metal bellows expansion joints. General |
| BS EN 50465:2015 | European product standard for combined heating power systems using gas fuel |
| ONORM EN 334 : JUN 2009 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| I.S. EN 16125:2015 | LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| I.S. EN 16436-1:2014 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| I.S. EN 14071:2015 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT |
| I.S. EN ISO 15876-3:2017 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 3: FITTINGS (ISO 15876-3:2017) |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| I.S. EN 14423:2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| I.S. EN 16617:2015 | PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
| PREN 30-1-1 : DRAFT 2017 | DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL |
| UNE-EN 14678-2:2009 | LPG equipment and accessories - Equipment for Liquefied Petroleum Gas automotive filling stations - Part 2: Components other than dispensers, and installation requirements |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| UNE-EN 14071:2015 | LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment |
| BS EN 14071:2015 | LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Ancillary equipment |
| UNE-EN ISO 15874-3:2013 | Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013) |
| I.S. EN 50465:2015 | GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| DIN EN 203-1:2014-07 | Gas heated catering equipment - Part 1: General safety rules |
| DIN EN 1020:2010-05 | NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
| DIN EN 1319:2010-06 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
| DIN EN 89:2015-08 | GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| DIN EN 14382:2016-05 (Draft) | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| DIN EN 1123-3:2005-02 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in shipbuilding |
| DIN EN 15266:2007-08 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
| DIN EN 303-5:2012-10 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| DIN EN 14424:2013-09 | HOSE FITTINGS WITH SCREWED FERRULES |
| UNE-EN 1458-1:2012 | Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety |
| BS EN 26:1998 | Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners |
| BS EN 334 : 2005 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| UNE-EN 1124-4:2014 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships |
| BS EN 498:2012 | Specification for dedicated liquefied petroleum gas appliances. Barbecues for outdoor use contact grills included |
| I.S. EN 1949:2011 | SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES (INCLUDING IRISH NATIONAL ANNEX) |
| I.S. EN 624:2011 | SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS |
| I.S. EN 14420-5:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| DIN EN 1775:2007-10 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
| I.S. EN 30-1-1:2008 | DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL |
| I.S. EN 13774:2013 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| DIN EN 1487:2000-06 | BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
| I.S. EN 1555-3:2010 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 3: FITTINGS |
| I.S. EN 1124-4:2013 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTEWATER SYSTEMS - PART 4: COMPONENTS FOR VACUUM DRAINAGE SYSTEMS AND FOR DRAINAGE SYSTEMS ON SHIPS |
| I.S. EN 498:2012 | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - BARBECUES FOR OUTDOOR USE CONTACT GRILLS INCLUDED |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| I.S. EN 14543:2017 | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE |
| I.S. EN 26:2015 | GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| DIN EN 14420-5:2013-09 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| DIN EN 14420-7:2013-09 | Hose fittings with clamp units - Part 7: Cam locking couplings |
| I.S. EN 203-1:2014 | GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES |
| I.S. EN 12828:2012 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
| I.S. EN 1349:2009 | INDUSTRIAL PROCESS CONTROL VALVES |
| I.S. EN 303-5:2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 14394:2006 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| I.S. EN 1458-1:2011 | DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY |
| I.S. EN 1487:2014 | BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
| I.S. EN 14420-7:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
| I.S. EN 10255:2004 | NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 1775:2007 | GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS |
| I.S. EN 12007-3:2015 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL |
| UNI EN 1349 : 2010 | INDUSTRIAL PROCESS CONTROL VALVES |
| 10/30228056 DC : 0 | |
| 11/30240282 DC : DRAFT MAR 2011 | BS EN 12828 - HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
| 09/30207446 DC : 0 | BS EN 498 - SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - BARBECUES FOR OUTDOOR USE CONTACT GRILLS INCLUDED |
| 05/30135337 DC : DRAFT JUN 2005 | EN 15266 - STAINLESS STEEL PLIABLE CORRUGATED TUBING SYSTEMS IN BUILDINGS FOR GAS WITH AN OPERATING PRESSURE UP TO 0,5 BAR |
| 09/30202316 DC : 0 | BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
| 11/30243885 DC : 0 | BS EN 13774 - VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| 13/30258750 DC : 0 | BS EN 12007-3 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL |
| 07/19990369 DC : 0 | BS EN 806-4 - SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4 - INSTALLATION |
| UNI EN 303-5 : 2012 | HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
| 08/30191150 DC : 0 | BS EN 1555-3 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 3: FITTINGS |
| DIN EN 12007-5:2014-07 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMIUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 5: SERVICE LINES - SPECIFIC FUNCTIONAL REQUIREMENTS |
| NF EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| UNE-EN 16129:2014 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| 12/30258147 DC : 0 | BS EN 203-1 - GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES |
| DIN EN ISO 15877-3:2011-03 | Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO 15877-3:2009 + AMD 1:2010) |
| 15/30325369 DC : 0 | BS EN 484 - SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - INDEPENDENT STOVES, INCLUDING THOSE INCORPORATING A GRILL FOR OUTDOOR USE |
| EN ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017) |
| BS EN 16125:2015 | LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase |
| PREN 1124-4 : DRAFT 2012 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTEWATER SYSTEMS - PART 4: COMPONENTS FOR VACUUM DRAINAGE SYSTEMS AND FOR DRAINAGE SYSTEMS ON SHIPS |
| EN 1555-3:2010+A1:2012 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings |
| EN ISO 15874-3:2013 | Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013) |
| PREN 10255 : DRAFT 2010 | NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| EN 50465 : 2015 | GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| UNI EN 1555-3 : 2013 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 3: FITTINGS |
| DIN EN 12828:2014-07 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
| DIN EN 1487:2014-09 | BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
| DIN EN 1555-3:2013-01 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings (includes Amendment A1:2012) |
| DIN EN 1949:2013-05 | Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles (includes Amendment A1:2013) |
| DIN EN 14543:2013-11 (Draft) | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE |
| DIN EN 14394:2008-12 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| BS EN 89:2015 | Gas-fired storage water heaters for the production of domestic hot water |
| BS EN 525:2009 | Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
| UNE-EN 1949:2011 | Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles |
| UNE-EN 14420-7:2014 | Hose fittings with clamp units - Part 7: Cam locking couplings |
| BS EN 1020:2009 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
| BS EN 1123-3:2004 | Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building |
| UNE-EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
| I.S. EN 777-4:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY |
| I.S. EN 525:2009 | NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| I.S. EN 777-2:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY |
| I.S. EN 416-1:2009 | SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY |
| I.S. EN 777-3:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
| I.S. EN 1319:2009 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
| I.S. EN 419-1:2009 | NON-DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY |
| I.S. EN 621:2009 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| UNE-EN 16125:2016 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
| I.S. EN 778:2009 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| I.S. EN 1020:2009 | NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
| I.S. EN 777-1:2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY |
| UNI EN 416-1 : 2009 | SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY |
| UNI EN 1458-1 : 2012 | DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY |
| UNI EN 1124-4 : 2013 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTEWATER SYSTEMS - PART 4: COMPONENTS FOR VACUUM DRAINAGE SYSTEMS AND FOR DRAINAGE SYSTEMS ON SHIPS |
| UNI EN 1487 : 2014 | BUILDING VALVES - HYDRAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
| ONORM EN ISO 21003-3 : 2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 3: FITTINGS |
| UNI EN 14394 : 2008 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C |
| EN 50465:2015 | Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW |
| UNI EN 498 : 2012 | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - BARBECUES FOR OUTDOOR USE CONTACT GRILLS INCLUDED |
| UNI EN 778 : 2009 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| UNI EN 10255 : 2007 | NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 777-4 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY |
| UNI EN 624 : 2011 | SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS |
| UNI EN 13774 : 2013 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| UNI EN 14424 : 2013 | HOSE FITTINGS WITH SCREWED FERRULES |
| UNI EN 1020 : 2009 | NON-DOMESTIC FORCED CONVECTION GAS- FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS |
| UNI EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| UNI EN 1775 : 2007 | GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS |
| UNI EN 15069 : 2009 | SAFETY GAS CONNECTION VALVES FOR METAL HOSE ASSEMBLIES USED FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUEL |
| UNI EN 14382 : 2009 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| UNI EN ISO 23553-1 : 2014 | SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES |
| UNI EN 1319 : 2010 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN- ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW |
| UNI EN 14420-7 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
| UNI EN 621 : 2010 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| UNI EN 14678-2 : 2012 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS AND INSTALLATION REQUIREMENTS |
| UNI EN 525 : 2009 | NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| UNI EN 14420-5 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| UNI EN 777-1 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY |
| UNI EN 12828 : 2014 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
| UNI EN 777-2 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY |
| UNI EN 419-1 : 2009 | NON DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY |
| UNI EN 777-3 : 2009 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 3: SYSTEM F - SAFETY |
| EN 303-5:2012 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| UNI EN 16129 : 2013 | PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES |
| DIN EN ISO 21003-3:2008-11 | Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008) |
| PREN 484 : DRAFT 2015 | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - INDEPENDENT STOVES, INCLUDING THOSE INCORPORATING A GRILL FOR OUTDOOR USE |
| BS EN ISO 21003-3:2008 | Multilayer piping systems for hot and cold water installations inside buildings Fittings |
| PREN 14424 : DRAFT 2010 | HOSE FITTINGS WITH SCREWED FERRULES |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| PREN 16617 : DRAFT 2013 | PIPEWORK - CORRUGATED METAL HOSE ASSEMBLIES FOR COMBUSTIBLE GAS - PERFORMANCE REQUIREMENTS, TESTING AND MARKING |
| PREN 203-1 : DRAFT 2012 | GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES |
| PREN 419 : DRAFT 2017 | GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NONDOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| 10/30228356 DC : 0 | BS EN ISO 15874-3 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 3: FITTINGS |
| 12/30256801 DC : DRAFT FEB 2012 | BS EN 1124-4 - PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTEWATER SYSTEMS - PART 4: COMPONENTS FOR VACUUM DRAINAGE SYSTEMS AND FOR DRAINAGE SYSTEMS ON SHIPS |
| PREN 14420-7 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS |
| 13/30276940 DC : 0 | BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| 10/30234634 DC : 0 | BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| 07/30163045 DC : DRAFT AUG 2007 | BS EN 525 - NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| BS EN 16722:2015 | Industrial valves. End-to-end and centre-to-end dimensions for valves with threaded ends |
| 08/30179182 DC : DRAFT MAY 2008 | BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES |
| DIN EN 15502-1:2015-10 | Gas-fired heating boilers - Part 1: General requirements and tests (includes Amendment A1:2015) |
| S.R. 12007-5:2016 | GUIDANCE ON THE APPLICATION OF I.S. EN 12007-5:2014, GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 5: SERVICE LINES - SPECIFIC FUNCTIONAL REQUIREMENTS |
| UNE-EN 16617:2015 | Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking |
| EN 16436-1:2014+A1:2015 | Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings |
| I.S. EN ISO 23553-1:2014 | SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014) |
| ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings |
| 17/30332894 DC : 0 | BS EN 17082 - DOMESTIC AND NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| 17/30363959 DC : 0 | BS EN 17175 - GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| DIN EN 14071:2015-08 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| UNE-EN 14423:2014 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| BS EN 1949:2011+A1:2013 | Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles |
| DIN EN 525:2009-11 | NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW |
| DIN EN 778:2010-03 | DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| DIN EN 10226-3 : 2006-10 | PIPES THREADS WHERE PRESSURE TIGHT JOINT ARE MADE ON THE THREADS - PART 3: VERIFICATION BY MEANS OF LIMIT GAUGES |
| DIN EN 13774:2013-05 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| BS EN 621:2009 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
| BS EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements |
| BS EN 14394 : 2005 | HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
| UNE-EN 498:2012 | Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use contact grills included |
| BS EN 10255:2004 | Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions |
| UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| BS EN 777-2:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System E. Safety |
| BS EN 1487:2014 | Building valves. Hydraulic safety groups. Tests and requirements |
| BS EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves |
| BS EN 10311:2005 | Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
| UNE-EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
| ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
| 12/30250105 DC : 0 | BS ISO 23553-1 - SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO/DIS 23553-1:2012) |
| BS EN 777-4:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System H. Safety |
| BS EN 777-1:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System D. Safety |
| UNE-EN 1020:2010 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
| ISO 21003-3:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings |
| DIN EN 15069:2010-07 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| BS EN 1124-4:2013 | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems Components for vacuum drainage systems and for drainage systems on ships |
| BS EN 203-1:2014 | Gas heated catering equipment General safety rules |
| BS EN 806-2:2005 | Specifications for installations inside buildings conveying water for human consumption Design |
| UNE-EN 30-1-1:2009 | Domestic cooking appliances burning gas - Part 1-1: Safety - General |
| ISO 15874-3:2013 | Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 3: Fittings |
| UNE-EN 14543:2006 | Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use |
| BS EN 10226-2:2005 | Pipe threads where pressure tight joints are made on the threads Taper external threads and taper internal threads. Dimensions, tolerances and designation |
| UNE-EN 14420-5:2014 | Hose fittings with clamp units - Part 5: Threaded connections |
| BS EN 12007-3:2000 | Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar Specific functional recommendations for steel |
| BS EN 14424:2013 | Hose fittings with screwed ferrules |
| UNE-EN 89:2016 | Gas-fired storage water heaters for the production of domestic hot water |
| UNE-EN 26:2016 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| UNE-EN 778:2010 | Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products |
| UNE-EN 624:2011 | Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats |
| UNE-EN 12007-3:2015 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
| UNE-EN 14424:2014 | Hose fittings with screwed ferrules |
| DIN EN 10226-2:2005-11 | Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation; German version EN 10226-2:2005 |
| EN 89:2015 | Gas-fired storage water heaters for the production of domestic hot water |
| EN 15069:2008 | Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel |
| EN 1458-1:2011 | Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety |
| EN 15266:2007 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
| EN 1775:2007 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
| EN 14543:2017 | Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use |
| EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
| EN 621:2009 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
| EN 777-2:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety |
| EN 14394:2005+A1:2008 | Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| EN 16678:2015 | Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| EN 525:2009 | Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
| EN 806-2:2005 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| EN ISO 16330:2003 | Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003) |
| EN 778:2009 | Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products |
| EN 1487:2014 | Building valves - Hydraulic safety groups - Tests and requirements |
| EN 16125:2015 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
| EN 416-1:2009 | Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety |
| EN 419-1:2009 | Non-domestic gas-fired overhead luminous radiant heaters - Part 1: Safety |
| EN 14420-5:2013 | Hose fittings with clamp units - Part 5: Threaded connections |
| EN 14678-2:2007+A1:2012 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 2: Components other than dispensers and installation requirements |
| EN 14420-7:2013 | Hose fittings with clamp units - Part 7: Cam locking couplings |
| EN 26:2015 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| EN 498:2012 | Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use contact grills included |
| EN 777-1:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety |
| EN 12828:2012+A1:2014 | Heating systems in buildings - Design for water-based heating systems |
| EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
| EN 14424:2013 | Hose fittings with screwed ferrules |
| EN 334:2005+A1:2009 | Gas pressure regulators for inlet pressures up to 100 bar |
| EN 777-3:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety |
| EN 16722:2015 | Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends |
| EN 777-4:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety |
| EN 624:2011 | Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats |
| EN 16617:2015 | Pipework - Corrugated metal hose assemblies for combustible gas - Performance requirements, testing and marking |
| UNI EN 203-1 : 2014 | GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES |
| DIN EN 16436-1:2016-04 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| 13/30268239 DC : 0 | BS EN 1487 - BUILDING VALVES - HYDAULIC SAFETY GROUPS - TESTS AND REQUIREMENTS |
| 17/30363953 DC : 0 | BS EN 416 - GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY |
| 12/30261644 DC : 0 | BS EN 16436 - RUBBER AND PLASTIC HOSES AND TUBINGS FOR USE WITH PROPANE, BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE |
| PREN ISO 15874-3 : DRAFT 2010 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 3: FITTINGS |
| 09/30201902 DC : 0 | BS EN 624 - SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS |
| DIN EN 16129:2013-08 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| 10/30227098 DC : 0 | BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
| 10/30233309 DC : 0 | BS EN 10255 - NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS |
| 10/30234604 DC : 0 | BS EN 14424 - HOSE FITTINGS WITH SCREWED FERRULES |
| 06/19977015 DC : DRAFT JULY 2006 | BS EN 10344 - MALLEABLE CAST IRON FITTINGS WITH COMPRESSION ENDS FOR STEEL PIPES |
| BS EN ISO 15877-3 : 2009 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 3: FITTINGS |
| UNI EN 806-2 : 2008 | SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 2: DESIGN |
| DIN EN 16678:2016-02 | Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
| UNE-EN 15266:2008 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
| PREN 12007-3 : DRAFT 2013 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL |
| BS EN 15502-1 : 2012 | GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| UNI EN 334 : 2009 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| ISO 15877-3:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings |
| I.S. EN 16129:2013 | PRESSURE REGULATORS, AUTOMATIC CHANGEOVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES |
| I.S. EN 16678:2015 | SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA |
| BS EN 16436-1 : 2014 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| BS EN 14423:2013+A2:2019 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| DIN EN 498:2012-04 | Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use contact grills included |
| I.S. EN ISO 21003-3:2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 3: FITTINGS |
| DIN EN 624:2011-10 | Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats |
| I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| BS EN 1949 : 2011 | SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES |
| DIN EN 777-4:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY |
| DIN EN 777-2:2009-09 | MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY |
| DIN EN 419-1:2009-07 | NON-DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY |
| DIN EN 10255:2015-05 (Draft) | Non-Alloy steel tubes suitable for welding, threading and other joining methods - Requirements and test methods; German and English version prEN 10255:2015 |
| DIN EN 30-1-1:2013-06 | Domestic cooking appliances burning gas - Part 1-1: Safety - General (includes Amendment 1:2013) |
| DIN EN 806-2:2005-06 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| BS EN 1775:2007 | Gas supply. Gas pipework for buildings. Maximum operating pressure less than or equal to 5 bar. Functional recommendations |
| BS EN 14543:2017 | Specification for dedicated liquefied petroleum gas appliances. Parasol patio heaters. Flueless radiant heaters for outdoor or amply ventilated area use |
| UNE-EN ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017) |
| BS EN 12828 : 2012 | HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS |
| BS EN 778:2009 | Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products |
| BS EN 286-1 : 1998 | SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES |
| BS EN ISO 15874-3 : 2013 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 3: FITTINGS |
| BS EN 777-3:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System F. Safety |
| BS EN 30-1-1 : 2008 | DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL |
| BS EN 1319:2009 | Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW |
| UNE-EN 303-5:2013 | Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
| EN 12007-3:2015 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
| EN 1020:2009 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
| DIN EN 621:2010-04 | NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS |
| DIN EN 10255:2007-07 | Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions (includes Amendment A1:2007) |
| EN ISO 21003-3:2008 | Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008) |
| I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| DIN EN 16722:2015-12 | INDUSTRIAL VALVES - ENDTOEND AND CENTRETOEND DIMENSIONS FOR VALVES WITH THREADED ENDS |
| DIN EN 10311:2005-08 | Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
| EN 15502-1:2012+A1:2015 | Gas-fired heating boilers - Part 1: General requirements and tests |
| DIN EN 1458-1:2012-02 | DOMESTIC DIRECT GAS-FIRED TUBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY |
| UNI EN ISO 15874-3 : 2013 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 3: FITTINGS |
| EN 1949:2011+A1:2013 | Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles |
| UNI EN 30-1-1 : 2013 | DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL |
| EN 10255:2004+A1:2007 | Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions |
| DIN EN 10226-3:2005-05 | PIPES THREADS WHERE PRESSURE-TIGHT JOINT ARE MADE ON THE THREADS - PART 3: VERIFICATION BY MEANS OF LIMIT GAUGES |
| UNE-EN 16125:2020 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
| UNE-EN 1555-3:2011 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings |
| UNE-EN 15502-1:2013 | Gas-fired heating boilers - Part 1: General requirements and tests |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.