EI 1540 : 2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE AND TESTING OF AVIATION FUELLING FACILITIES
Available format(s)
Hardcopy , PDF
Superseded date
10-07-2024
Superseded by
Language(s)
English
Published date
01-10-2014
Foreword
Acknowledgements
1 General
2 Depot location
3 Depot layout
4 Depot plant, fixed equipment and buildings
5 Fuel hydrant systems
6 Mobile fuelling and hydrant maintenance equipment
7 Fuelling hoses and hose assemblies
8 Equipment maintenance and testing
9 Health, safety, environment and security
10 Fire protection and emergency procedures
11 Training
12 Retail or consumer fuelling facilities
Annexes
Annex A - Glossary
Annex B - Bibliography
Annex C - Equipment/installation pre-conditioning prior to use
with aviation fuel
Annex D - List of abbreviations
Pertains to provide guidance for designers, constructors and commissioning operators of new build and refurbished fuelling facilities.
| DevelopmentNote |
Supersedes API 1500. (03/2004) PREVIOUSLY PUBLISHED JOINTLY BY API & EI, NOW ONLY PUBLISHED BY EI. (02/2011) Supersedes EI MODEL CODE SAFE PRACTICE PT7. (03/2011)
|
| DocumentType |
Standard
|
| ISBN |
9780852937082
|
| Pages |
136
|
| PublisherName |
Energy Institute (formerly Institute of Petroleum - IP)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| API 2003 REDLINE : 2008 | PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS |
| EI/JIG 1530 : 2013 | QUALITY ASSURANCE REQUIREMENTS FOR THE MANUFACTURE, STORAGE AND DISTRIBUTION OF AVIATION FUEL TO AIRPORTS |
| NFPA 407 : 2017 | AIRCRAFT FUEL SERVICING |
| API 1543 : 2009 | DOCUMENTATION, MONITORING AND LABORATORY TESTING OF AVIATION FUEL DURING SHIPMENT FROM REFINERY TO AIRPORT |
| MIL-HDBK-510 Revision A:2014 | Aerospace Fuels Certification |
| MIL-HDBK-510-1 Revision A:2010 | AEROSPACE FUELS CERTIFICATION |
| EI 1585 : 2013 | GUIDANCE IN THE CLEANING OF AVIATION FUEL HYDRANT SYSTEMS AT AIRPORTS |
| EI 1560 : 2013 | RECOMMENDED PRACTICE FOR THE OPERATION, INSPECTION, MAINTENANCE AND COMMISSIONING OF AVIATION FUEL HYDRANT SYSTEMS AND HYDRANT SYSTEM EXTENSIONS |
| EI 1592 : 2017 | DESIGN, FUNCTIONAL REQUIREMENTS AND LABORATORY TESTING PROTOCOLS FOR ELECTRONIC BULK WATER DETECTORS FOR USE IN AVIATION FUELLING |
| ICAO 9977 : 2012 | MANUAL ON CIVIL AVIATION JET FUEL SUPPLY |
| EI 1594 : 2014 | INITIAL PRESSURE STRENGTH TESTING OF AIRPORT FUEL HYDRANT SYSTEMS WITH WATER |
| BS PD IEC TS 60079-32-1 : 2013 | EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS, GUIDANCE |
| EI/JIG 1530 : 2019 | Quality assurance requirements for the manufacture, storage and distribution of aviation fuel to airports (A4) |
| EI MODEL CODE SAFE PRACTICE PT1 : 2010 | THE SELECTION, INSTALLATION, INSPECTION, AND MAINTENANCE OF ELECTRICAL AND NON ELECTRICAL APPARATUS IN HAZARDOUS AREAS |
| EI 1598 : 2012 | DESIGN, FUNCTIONAL REQUIREMENTS AND LABORATORY TESTING PROTOCOLS FOR ELECTRONIC SENSORS TO MONITOR FREE WATER AND/OR PARTICULATE MATTER IN AVIATION FUEL |
| IEE WIRING REGS : 16 ED | INSTITUTE OF ELECTRICAL ENGINEERS WIRING REGULATIONS |
| PD CLC/TR 50404:2003 | Electrostatics. Code of practice for the avoidance of hazards due to static electricity |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| API/EI 545-A : 2009 | VERIFICATION OF LIGHTNING PROTECTION REQUIREMENTS FOR ABOVE GROUND HYDROCARBON STORAGE TANKS |
| EI 1550 : 2014 | HANDBOOK ON EQUIPMENT USED FOR THE MAINTENANCE AND DELIVERY OF CLEAN AVIATION FUEL |
| PD CLC/TR 50427:2004 | Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide |
| API 575 : 2014 | INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| EN 13121-3:2016 | GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
| NACE SP 01 88 : 2006 | DISCONTINUITY (HOLIDAY) TESTING OF NEW PROTECTIVE COATINGS ON CONDUCTIVE SUBSTRATES |
| EI/JIG 1530 : 2013 | QUALITY ASSURANCE REQUIREMENTS FOR THE MANUFACTURE, STORAGE AND DISTRIBUTION OF AVIATION FUEL TO AIRPORTS |
| ISO 1825:2010 | Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling Specification |
| EN 62305-4:2011/AC:2016 | PROTECTION AGAINST LIGHTNING - PART 4: ELECTRICAL AND ELECTRONIC SYSTEMS WITHIN STRUCTURES (IEC 62305-4:2010) |
| BS 2C 13:1988 | Specification for sizes of aircraft gravity filling orifices and associated replenishment nozzles (metric series) |
| EI 1584 : 2017 | FOUR-INCH HYDRANT SYSTEM COMPONENTS AND ARRANGEMENTS |
| EEMUA 107 : 1992 | RECOMMENDATIONS FOR THE PROTECTION OF DIESEL ENGINES FOR USE IN ZONE 2 HAZARDOUS AREAS |
| NFPA 780 : 2017 | INSTALLATION OF LIGHTNING PROTECTION SYSTEMS |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| EN 1759-1:2004 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| EI 1590 : 2014 | SPECIFICATIONS AND QUALIFICATION PROCEDURES FOR AVIATION FUEL MICROFILTERS |
| EI Model Code of Safe Practice Part 16:2017 | MODEL CODE OF SAFE PRACTICE - PART 16: GUIDANCE ON TANK CLEANING |
| API 2000 : 2014 | VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| EI 1596 : 2013 | DESIGN AND CONSTRUCTION OF AVIATION FUEL FILTER VESSELS |
| ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
| API 653 : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| SAE AS5877B | Detailed Specification for Aircraft Pressure Refueling Nozzle |
| API 2016 : 2001 | GUIDELINES AND PROCEDURES FOR ENTERING AND CLEANING PETROLEUM STORAGE TANKS |
| EI 1581 : 2016 | SPECIFICATIONS AND LABORATORY QUALIFICATION PROCEDURES FOR AVIATION FUEL FILTER/WATER SEPARATORS |
| ISO 102:1990 | Aircraft — Gravity filling orifices |
| EI 1583 : 2010 | LABORATORY TESTS AND MINIMUM PERFORMANCE LEVELS FOR AVIATION FUEL FILTER MONITORS |
| API 2003 : 2015 | PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS |
| EN 14015:2004 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| FAA AC 150/5300-13 : 2008 | AIRPORT DESIGN |
| DEFSTAN 91-90/1(1996) : 1996 | GASOLINE, AVIATION: GRADES 80/87, 100/130 AND 100/130 LOW LEAD - JOINT SERVICE DESIGNATION: AVGAS 80, AVGAS 100 AND AVGAS 100LL |
| EN 13923:2005 | Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing |
| EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
| EEMUA 159 : 2014 | ABOVE GROUND FLAT BOTTOMED STORAGE TANKS - A GUIDE TO INSPECTION, MAINTENANCE AND REPAIR |
| BS 8206-2:2008 | Lighting for buildings Code of practice for daylighting |
| EN 62305-4:2011/AC:2016-11 | Protection against lightning - Part 4: Electrical and electronic systems within structures |
| EN 13765:2010+A1:2015 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
| ASTM D 910 : 2017-05 | SPECIFICATION FOR LEADED AVIATION GASOLINES |
| NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
| JIG 1 : ISSUE 11 | AVIATION FUEL QUALITY CONTROL & OPERATING STANDARDS FOR INTO-PLANE FUELLING SERVICES |
| EN 60079-11:2012 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| EN 62305-3:2011 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
| BS 5842:1980 | Specification for thermoplastic hose assemblies for dock, road and tanker use |
| EI Model code of safe practice Part 15:2015 | MODEL CODE OF SAFE PRACTICE - PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS |
| EI 1542 : 2012 | IDENTIFICATION MARKINGS FOR DEDICATED AVIATION FUEL MANUFACTURING AND DISTRIBUTION FACILITIES, AIRPORT STORAGE AND MOBILE FUELLING EQUIPMENT |
| CAA CAP 748 : 2004 | AIRCRAFT FUELLING AND FUEL INSTALLATION MANAGEMENT |
| DEFSTAN 91-91/7(2011) : 2011 | TURBINE FUEL, KEROSINE TYPE, JET A-1 NATO CODE: F-35 JOINT SERVICE DESIGNATION: AVTUR |
| EI MODEL CODE SAFE PRACTICE PT2 : 3ED 2013 | DESIGN, CONSTRUCTION AND OPERATION OF PETROLEUM DISTRIBUTION INSTALLATIONS |
| EI MODEL CODE SAFE PRACTICE PT1 : 2010 | THE SELECTION, INSTALLATION, INSPECTION, AND MAINTENANCE OF ELECTRICAL AND NON ELECTRICAL APPARATUS IN HAZARDOUS AREAS |
| API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
| EI 1582 : 2011 | SPECIFICATION FOR SIMILARITY FOR EI 1581 AVIATION JET FUEL FILTER/WATER SEPARATORS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| DEFSTAN 80-97/5(2012) : 2012 | PAINT, SYSTEM, FOR THE INTERIOR OF BULK FUEL TANKS AND FITTINGS, MULTI-PACK |
| API 2001 : 2012 | FIRE PROTECTION IN REFINERIES |
| EN 62305-2:2012 | Protection against lightning - Part 2: Risk management |
| API 2015 : 2014 | REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS |
| EN 12285-2:2005 | Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids |
| ISO 9001:2015 | Quality management systems — Requirements |
| EI RISK ASSESSMENT FOR PETROLEUM PRODUCT : 2013 | GUIDANCE ON RISK ASSESSMENT AND CONCEPTUAL DESIGN OF TERTIARY CONTAINMENT SYSTEMS FOR BULK STORAGE OF PETROLEUM, PETROLEUM PRODUCTS, OR OTHER FUELS |
| SAE AS1852D | Nozzles and Ports – Gravity Fueling Interface Standards for Civil Aircraft |
| DEFSTAN 91-87/6(2009) : 2009 | TURBINE FUEL, AVIATION KEROSINE TYPE, CONTAINING FUEL SYSTEM ICING INHIBITOR - NATO CODE: F-34 - JSD: AVTUR/FSII |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| EN 60079-14:2014/AC:2016 | EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
| JIG 2 : ISSUE 11 | AVIATION FUEL QUALITY CONTROL & OPERATING STANDARDS FOR AIRPORT DEPOTS & HYDRANTS |
| EN 10253-3:2008 | Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| EI 1560 : 2013 | RECOMMENDED PRACTICE FOR THE OPERATION, INSPECTION, MAINTENANCE AND COMMISSIONING OF AVIATION FUEL HYDRANT SYSTEMS AND HYDRANT SYSTEM EXTENSIONS |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| EN 12285-1:2003 | Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids |
| NFPA 77 : 2014 | STATIC ELECTRICITY |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
| EI 1585 : 2013 | GUIDANCE IN THE CLEANING OF AVIATION FUEL HYDRANT SYSTEMS AT AIRPORTS |
| API 650 : 2013 | WELDED TANKS FOR OIL STORAGE |
| EI HM 20 : 2013 | PROVING OF AVIATION FUELLING POSITIVE DISPLACEMENT METERS |
| EI MODEL CODE SAFE PRACTICE PT19 : 2012 | FIRE PRECAUTIONS AT PETROLEUM REFINERIES AND BULK STORAGE INSTALLATIONS |
| SAE ARP5818A | Aircraft Refueling Vehicle Design and Performance Requirements |
| EN 12312-5:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| ISO 8995-1:2002 | Lighting of work places — Part 1: Indoor |
| EN 14161:2011+A1:2015 | Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified) |
| NFPA 407 : 2017 | AIRCRAFT FUEL SERVICING |
| EN 10253-2:2007 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| NFPA 410 : 2015 | AIRCRAFT MAINTENANCE |
| EI MODEL CODE SAFE PRACTICE PT21 : 3ED 2013 | MODEL CODE OF SAFE PRACTICE - PART 21: GUIDELINES FOR THE CONTROL OF HAZARDS ARISING FROM STATIC ELECTRICITY |
| API 1615 : 2011 | INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS |
| MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
| SAE ARP 5918 : 2006 | STANDARD TEST CRITERIA FOR AIRCRAFT REFUELERS |
| NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.