DIN VDE 0281-1 : 2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING THERMOPLASTIC INSULATION - PART 1: GENERAL REQUIREMENTS
01-01-2012
12-01-2013
Vorwort
1 Allgemeines
1.1 Anwendungsbereich
1.2 Zweck
1.3 Gemeinsame Kennzeichnung
2 Definitionen
2.1 Definitionen für Isolier- und Mantelmischungen
2.2 Definitionen für Prüfverfahren
2.3 Nennspannung
3 Kennzeichnung
3.1 Ursprungskennzeichnung
3.2 Kennzeichenfolge
3.3 Beständigkeit
3.4 Lesbarkeit
3.5 Gemeinsame Kennzeichnung
3.6 Verwendung des Wortes CENELEC
4 Aderkennzeichnung
4.1 Allgemeine Anforderungen
4.2 Farbschema
4.3 Farbkombination grün-gelb
4.4 Aderkennzeichnung flexibler Leitungen durch
Aufdruck
5 Allgemeine Anforderungen an den Aufbau der Leitungen
5.1 Leiter
5.2 Isolierhülle
5.3 Zwickelfüllung
5.4 Extrudierte gemeinsame Aderumhüllung
5.5 Mantel
5.6 Prüfungen an dervollständigen Leitung
6 Hinweise für die Verwendung
Anhang A (normativ) Normative Verweisungen auf
internationale Publikationen mit ihren
entsprechenden europäischen Publikationen
Anhang B (informativ) Nationale Kennzeichnung
HD 21 gilt für Leitungen für feste Verlegung und flexible Leitungen mit Isolierhülle und, sofern vorhanden, Mantel aus Kunststoff auf der Basis von Polyvinylchlorid und mit Nennspannungen U[0]/U bis 450/750 V für Starkstromanlagen mit Nennwechselspannungen bis 450/750 V. ANMERKUNG: Für einige flexible Leitungen wird die Definition 'Schnur' verwendet. Teil 1 legt die allgemeinen Anforderungen für diese Leitungen fest. Die vorgeschriebenen Prüfverfahren sind in Teil 2 dieses HD, in HD 405.1 und EN 60811 angegeben. Die einzelnen Leitungsbauarten sind in Teil 3 und den folgenden Teilen dieses HD festgelegt (nachfolgend Aufbaunormen genannt). Die Typkurzzeichen der Leitungen entsprechen HD 361.
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| HD 21.1 : 200S4 | Corresponds |
| VDE 0281-1 : 2003 | Identical |
| DIN 47732:1986-07 | CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - PVC-SHEATHED FLEXIBLE CABLE 05VV AND 05VVH2 - DIMENSIONS, DESIGNATION, WEIGHTS AND PACKAGING-REQUIREMENT |
| DIN VDE 0281-403 : 1989 | PVC-CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - FLAT PVC-SHEATHED FLEXIBLE CABLE 05VVH6 |
| DIN VDE 0281-3 : 2001 AMD 2 2009 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 3: NON SHEATHED CABLES FOR FIXED WIRING |
| VDE 0281-10 : 2003 | POLYVINYLCHLORID-ISOLIERTE STARKSTROMLEITUNGEN MIT NENNSPANNUNGEN BIS 450/750 V WENDELLEITUNGEN |
| VDE 0630 : 1992 | SWITCHES FOR APPLIANCES FOR A RATED VOLTAGE NOT EXCEEDING 500 V AND A RATED CURRENT NOT EXCEEDING 63 A |
| DIN EN 1870-16:2013-01 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING |
| DIN EN 81-2:2000-05 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| VDE 0281-103 : 1985 | PVC-CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - PVC SINGLE-CORE NON-SHEATHED CABLE |
| VDE 0634-1 : 1987 | UNDERFLOOR ELECTRICAL INSTALLATION - SERVICE UNITS |
| DIN EN 1807:2010-02 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES |
| DIN EN 1870-14:2012-06 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| DIN EN 1218-1:2010-02 | Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table (includes Amendment A1:2009) |
| DIN EN 1218-4:2009-12 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S) |
| DIN EN 1870-1:1999-07 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| DIN EN 1218-3:2009-12 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS |
| DIN EN 1807:1999-10 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES |
| VDE 0281-3 : 2001 AMD 2 2009 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 3: NON SHEATHED CABLES FOR FIXED WIRING |
| VDE 0250-204 : 2000 | |
| VDE 0281-8 : 2000 | POLYVINYL CHLORIDE INSULATED CABLES OF NOMINAL VOLTAGES UP TO AND INCLUDING 450/750 V - PART 8: SINGLE CORE NON-SHEATHED CABLES FOR DECORATIVE CHAINS |
| VDE 0620 : 1992 | PLUGS AND SOCKET-OUTLETS UP TO 400 V, 25 A |
| VDE 0281-403 : 1989 | PVC-CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - FLAT PVC-SHEATHED FLEXIBLE CABLE 05VVH6 |
| DIN VDE 0281-8 : 2000 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 8: SINGLE CORE NON-SHEATHED CABLES FOR DECORATIVE CHAINS |
| VDE 0281-302 : 1985 | PVC-CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATIONS - FLAT TWIN FLEXIBLE CORD |
| DIN VDE 0281-301 : 1985 | PVC CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - FLAT TWIN TINSEL CORD |
| VDE 0281-301 : 1985 | PVC-CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATIONS - FLAT TWIN TINSEL CORD |
| DIN VDE 0281-404 : 1989 | PVC CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - FLAT PVC-SHEATHED FLEXIBLE CABLE 07VVH6 |
| DIN VDE 0281-402 : 1988 | PVC-CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATIONS - PVC-SHEATHED FLEXIBLE CORD 05VV |
| VDE 0281-402 : 1988 | PVC-CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATIONS - PVC-SHEATHED FLEXIBLE CORD 05VV |
| VDE 0281-9 : 2001 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 9: SINGLE CORE NON-SHEATHED CABLES FOR INSTALLATION AT LOW TEMPERATURES |
| DIN VDE 0281-302 : 1985 | PVC CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - FLAT TWIN FLEXIBLE CORD |
| DIN VDE 0634-1 : 1987 | UNDERFLOOR ELECTRICAL INSTALLATION - SERVICE UNITS |
| DIN VDE 0281-7 : 2001 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - SINGLE CORE NON-SHEATHED CABLES FOR INTERNAL WIRING FOR CONDUCTOR TEMPERATURE OF 90 DEGREE C POUR FILERIE INTERNE |
| DIN EN 1870-1:2009-08 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| DIN EN 81-2:2010-08 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
| DIN VDE 0250-204 : 2000 | CABLES, WIRES AND CORDS FOR POWER INSTALLATION - PVC-INSTALLATION CABLE NYM |
| VDE 0281-404 : 1989 | PVC-CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATIONS - FLAT PVC-SHEATHED FLEXIBLE CABLE 07VVH6 |
| VDE 0281-7 : 2001 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 7: SINGLE CORE NON-SHEATHED CABLES FOR INTERNAL WIRING FOR CONDUCTOR TEMPERATURE OF 90 DEGREES C |
| DIN VDE 0281-103 : 1985 | PVC-CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - PVC SINGLE-CORE NON-SHEATHED CABLE |
| DIN VDE 0630 : 1992 | SWITCHES FOR APPLIANCES FOR A RATED VOLTAGE NOT EXCEEDING 500 V AND A RATED CURRENT NOT EXCEEDING 63 A |
| DIN EN 1870-4:2012-06 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| DIN EN 1218-5:2010-02 | Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain (includes Amendment A1:2009) |
| DIN EN 81-3:2011-06 | Safety rules for the construction und installation of lifts - Part 3: Electric and hydraulic service lifts (includes Amendment A1:2008 + Corrigendum AC:2009) |
| DIN EN 81-1:2000-05 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
| DIN EN 81-1:2010-06 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.