DIN ISO 8992:2005-09
Current
Current
The latest, up-to-date edition.
Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
Available format(s)
Hardcopy , PDF
Language(s)
English, German
Published date
01-09-2005
DevelopmentNote |
Supersedes DIN 267-1 (03/2003)
|
DocumentType |
Standard
|
Pages |
9
|
ProductNote |
Supersedes DIN 267-1 (Amit 03/2003)
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Standards | Relationship |
SNV DIN ISO 8992 : 1992 | Identical |
ISO 8992:2005 | Identical |
DIN EN ISO 1478:1999-12 | Tapping screw thread (ISO 1478:1999); German version EN ISO 1478:1999 |
ISO 272:1982 | Fasteners — Hexagon products — Widths across flats |
ISO 8839:1986 | Mechanical properties of fasteners Bolts, screws, studs and nuts made of non-ferrous metals |
ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
DIN EN ISO 2320:2016-05 | FASTENERS - PREVAILING TORQUE STEEL NUTS - FUNCTIONAL PROPERTIES (ISO 2320:2015) |
ISO 898-7:1992 | Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm |
ISO 10683:2014 | Fasteners Non-electrolytically applied zinc flake coatings |
ISO 885:2000 | General purpose bolts and screws — Metric series — Radii under the head |
ISO 10684:2004 | Fasteners — Hot dip galvanized coatings |
ISO 4042:1999 | Fasteners Electroplated coatings |
ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
ISO 6157-3:1988 | Fasteners — Surface discontinuities — Part 3: Bolts, screws and studs for special requirements |
ISO 965-5:1998 | ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing |
ISO 4753:2011 | Fasteners Ends of parts with external ISO metric thread |
DIN EN ISO 16426:2003-06 | FASTENERS - QUALITY ASSURANCE SYSTEM |
DIN EN ISO 7085:2000-01 | MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS |
ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
ISO 6157-1:1988 | Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements |
DIN EN ISO 3269:2000-11 | FASTENERS - ACCEPTANCE INSPECTION |
DIN EN ISO 4759-1:2001-04 | TOLERANCES FOR FASTENERS - PART 1: BOLTS, SCREWS, STUDS AND NUTS - PRODUCT GRADES A, B AND C |
ISO 2320:2015 | Fasteners Prevailing torque steel nuts Functional properties |
ISO 7721:1983 | Countersunk head screws — Head configuration and gauging |
ISO 16426:2002 | Fasteners — Quality assurance system |
DIN EN ISO 3506-4:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
ISO 7085:1999 | Mechanical and performance requirements of case hardened and tempered metric thread rolling screws |
ISO 10666:1999 | Drilling screws with tapping screw thread — Mechanical and functional properties |
DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
DIN EN ISO 898-5:2012-09 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
ISO 965-2:1998 | ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
DIN EN ISO 3506-1:2010-04 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
ISO 898-6:1994 | Mechanical properties of fasteners Part 6: Nuts with specified proof load values Fine pitch thread |
ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread |
ISO 3508:1976 | Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262 |
ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress |
ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 4: Tapping screws |
ISO 965-4:1998 | ISO general purpose metric screw threads Tolerances Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing |
DIN EN ISO 3506-2:2010-04 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
DIN ISO 965-1:2017-05 | ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA (ISO 965-1:2013) |
ISO 16048:2003 | Passivation of corrosion-resistant stainless-steel fasteners |
ISO 888:2012 | Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths |
ISO 4755:1983 | Fasteners — Thread undercuts for external metric ISO threads |
ISO 6157-2:1995 | Fasteners Surface discontinuities Part 2: Nuts |
DIN EN ISO 10666:2000-02 | Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999); German version EN ISO 10666:1999 |
ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
ISO 2702:2011 | Heat-treated steel tapping screws — Mechanical properties |
DIN EN 20898-7:1995-04 | MECHANICAL PROPERTIES OF FASTENERS - PART 7: TORSIONAL TEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM |
ISO 10664:2014 | Hexalobular internal driving feature for bolts and screws |
ISO 965-3:1998 | ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads |
DIN EN ISO 10683:2016-07 (Draft) | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
ISO 1478:1999 | Tapping screws thread |
ISO 4757:1983 | Cross recesses for screws |
ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
DIN EN 26157-1:1991-12 | FASTENERS - SURFACE DISCONTINUITIES - BOLTS, SCREWS AND STUDS SUBJECT FOR GENERAL REQUIREMENTS |
DIN EN ISO 10684:2011-09 | Fasteners - Hot dip galvanized coatings (ISO 10684:2004 + Cor. 1:2008) |
ISO 3269:2000 | Fasteners Acceptance inspection |
ISO 7378:1983 | Fasteners — Bolts, screws and studs — Split pin holes and wire holes |
ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.