DIN EN ISO 8835-2:2009-08
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
INHALATIONAL ANAESTHESIA SYSTEMS - PART 2: ANAESTHETIC BREATHING SYSTEMS
Hardcopy , PDF
01-12-2013
English
01-01-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
Einleitung
1 Anwendungsberiech
2 Normative Verweisungen
3 Begriffe
4 Allgemeines
5 Anschlussöffnungen
6 Wahlschalter für Reservoirbeutel bzw.
Anästhesie-Beatmungsgerät
7 Vollständiges Anästhesie-Atemsystem, das entweder
montiert geliefert oder nach den Herstelleranweisungen
zusammengebaut wird
8 Austauschbare Bauteile des
Anästhesie-Atemsystems - Abgasventile
9 Absorber-Baugruppen für ein Kreissystem
10 Drucküberwachung und -begrenzung
11 Anordnung von Bauteilen in Anästhesie-Atemsystemen
mit einer Absorber-Baugruppe für ein Kreissystem
12 Kennzeichnung
13 Vom Hersteller oder Lieferanten zu liefernde Informationen
Anhang A (normativ) Typische Prüfanordnungen und
Prüfverfahren
Anhang B (informativ) Begründungen
Anhang C (informativ) Umweltgesichtspunkte
Anhang D (normativ) Antistatische Anforderungen
Literaturhinweise
Anhang ZA (informativ) Zusammenhang zwischen dieser
Europäischen Norm und den grundlegenden
Anforderungen der EG-Richtlinie 93/42/EWG
Dieser Teil von ISO 8835 legt Anforderungen für Anästhesie Atemsysteme fest, die entweder vom Hersteller montiert geliefert werden oder vom Betreiber nach den Herstelleranweisungen zusammengebaut werden.
| DevelopmentNote |
Supersedes DIN EN 740. (06/2012)
|
| DocumentType |
Standard
|
| Pages |
33
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| EN ISO 8835-2:2009 | Identical |
| I.S. EN ISO 8835-2:2009 | Identical |
| NS EN ISO 8835-2 : 2009 | Identical |
| SN EN ISO 8835-2 : 2009 | Identical |
| NEN EN ISO 8835-2 : 2009 | Identical |
| ISO 8835-2:2007 | Identical |
| NF EN ISO 8835-2 : 2009 | Identical |
| UNE-EN ISO 8835-2:2009 | Identical |
| NBN EN ISO 8835-2 : 2009 | Identical |
| BS EN ISO 8835-2:2009 | Identical |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| DIN EN 60601-1-6 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-6: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: USABILITY (IEC 60601-1-6:2010 + A1:2013) |
| VDE 0750-1-2 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES REQUIREMENTS AND TESTS (IEC 60601-1-2:2014) |
| IEC 60601-1-6:2010+AMD1:2013 CSV | Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
| ISO 5356-1:2015 | Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets |
| VDE 0750-1-6 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-6: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: USABILITY (IEC 60601-1-6:2010 + A1:2013) |
| ISO/TS 18835:2004 | Inhalational anaesthesia systems Draw-over vaporizers and associated equipment |
| ISO 5356-2:2012 | Anaesthetic and respiratory equipment — Conical connectors — Part 2: Screw-threaded weight-bearing connectors |
| ISO 5367:2014 | Anaesthetic and respiratory equipment — Breathing sets and connectors |
| IEC 60601-1-2:2014 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| ISO 5362:2006 | Anaesthetic reservoir bags |
| ISO 8185:2007 | Respiratory tract humidifiers for medical use Particular requirements for respiratory humidification systems |
| IEC 60601-2-13:2003+AMD1:2006 CSV | Medical electrical equipment - Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems |
| DIN EN ISO 5356-1:2015-06 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS (ISO 5356-1:2015) |
| DIN EN 1707:1997-01 | CONICAL FITTINGS WITH A 6% (LUER) TAPER FOR SYRINGES, NEEDLES AND CERTAIN OTHER MEDICAL EQUIPMENT - LOCK FITTINGS |
| ISO 2878:2017 | Rubber, vulcanized or thermoplastic Antistatic and conductive products Determination of electrical resistance |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| ISO 4135:2001 | Anaesthetic and respiratory equipment Vocabulary |
| ISO 594-2:1998 | Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 2: Lock fittings |
| VDE 0750-1 : 2013 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005 + COR.:2006 + COR.:2007 + A1:2012) |
| DIN EN ISO 4135:2002-03 | Anaesthetic and respiratory equipment - Vocabulary (ISO 4135:2001); Trilingual version EN ISO 4135:2001 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.