DIN EN ISO 3269:2000-11
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FASTENERS - ACCEPTANCE INSPECTION
Available format(s)
Hardcopy , PDF
Superseded date
30-01-2021
Superseded by
Language(s)
English, German
Published date
01-11-2000
Important note : All end users must be registered with an Account prior to user licenses being assigned.This international standard specifies the acceptance inspection procedure that the purchaser of fasteners must follow in order to determine whether a lot of fasteners will be accepted or rejected incases where no other such procedure was agreed with the supplier at the time the fasteners were ordered.
| Committee |
TC 185
|
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 3269:2000 | Identical |
| EN ISO 3269:2000 | Identical |
| BS EN ISO 3269:2001 | Identical |
| NF EN ISO 3269 : 2000 | Identical |
| I.S. EN ISO 3269:2000 | Identical |
| UNI EN ISO 3269 : 2002 | Identical |
| ONORM EN ISO 3269 : 2000 | Identical |
| DIN EN ISO 4766:2011-11 | Slotted set screws with flat point (ISO 4766:2011) |
| DIN 258:2012-05 | Taper pins with thread ends and constant taper lengths |
| DIN 931-2:2009-06 | Hexagon head bolts - Part 2: Metric thread M 68 to M 160 x 6 - Product grade B |
| DIN 6915:1999-12 | HEXAGON NUTS WITH LARGE WIDTHS ACROSS FLATS FOR HIGH STRENGTH STRUCTURAL BOLTING |
| DIN 6303:2006-08 | Knurled nuts |
| DIN EN ISO 1479:2011-10 | Hexagon head tapping screws (ISO 1479:2011) |
| DIN 314:1999-09 | Wing nuts - Edged wings |
| DIN 434:2000-04 | Square taper steel washers for use with channel sections |
| DIN 464:2007-01 | Knurled thumb screws, high type |
| DIN 935-3:2013-08 | HEXAGON SLOTTED NUTS - PART 3: METRIC COARSE PITCH THREAD, PRODUCT GRADE C |
| DIN 186:2010-09 | T-head bolts with square neck |
| DIN 466:2006-08 | Knurled nuts with collar |
| DIN 5903-1:2011-01 | Fish bolts - Part 1: With round head and oval neck |
| DIN 478:2016-08 | SQUARE HEAD BOLTS WITH COLLAR |
| DIN 96:2016-12 | SLOTTED ROUND HEAD WOOD SCREWS |
| DIN EN ISO 7719:2016-05 (Draft) | PREVAILING TORQUE TYPE ALL-METAL HEXAGON REGULAR NUTS - PROPERTY CLASSES 5, 8 AND 10 (ISO 7719:2012) |
| DIN EN ISO 10512:2016-05 (Draft) | PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 6, 8 AND 10 (ISO 10512:2012) |
| DIN EN ISO 7040:2016-05 (Draft) | PREVAILING TORQUE TYPE HEXAGON REGULAR NUTS (WITH NON-METALLIC INSERT) - PROPERTY CLASSES 5, 8 AND 10 (ISO 7040:2012) |
| DIN EN ISO 10673:2009-10 | Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009) |
| DIN EN ISO 10669:1999-11 | Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999); German version EN ISO 10669:1999 |
| DIN EN ISO 7045:2011-12 | Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011) |
| DIN EN ISO 10642:2013-04 | HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004 + AMD 1:2012) |
| DIN EN ISO 21670:2014-09 | FASTENERS - HEXAGON WELD NUTS WITH FLANGE (ISO 21670:2014) |
| DIN EN ISO 14581:2014-02 | Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013) |
| DIN 7989-1:2001-04 | Washers for steel structures - Part 1: Product grade C |
| DIN 21057-12:2015-07 (Draft) | PIPE CLASSES FOR PROCESS PLANTS - PART 12: TECHNICAL DELIVERY CONDITIONS FOR PIPE COMPONENTS OF NON ALLOYED AND ALLOYED STEEL WITH SPECIFIED PROPERTIES AT ELEVATED TEMPERATURES OF MATERIAL GROUP 1.2 AND 5.1 |
| DIN HDBK 142 : 6ED 2005 | STEEL PIPELINES 3 - STANDARDS FOR ACCESSORIES AND TESTING |
| DIN 21057-11:2015-07 (Draft) | PIPE CLASSES FOR PROCESS PLANTS - PART 11: TECHNICAL DELIVERY CONDITIONS FOR PIPE COMPONENTS OF AUSTENITIC STAINLESS STEELS OF MATERIAL GROUP 8.1 |
| DIN 7984:2009-06 | Hexagon socket head cap screws with low head |
| DIN 261:2010-12 | T-head bolts |
| DIN 603:2016-10 (Draft) | CUP HEAD SQUARE NECK BOLTS |
| DIN 797:2009-11 | Special foundation bolts |
| DIN EN ISO 7051:2011-11 | Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011) |
| DIN EN ISO 1481:2011-10 | Slotted pan head tapping screws (ISO 1481:2011) |
| DIN EN ISO 7380-2:2011-11 | Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011) |
| DIN EN ISO 1483:2011-10 | Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011) |
| DIN EN ISO 7089:2000-11 | PLAIN WASHERS - NORMAL SERIES, PRODUCT GRADE A |
| DIN EN ISO 8675:2016-05 (Draft) | HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012) |
| DIN EN ISO 8765:2011-06 | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) |
| DIN EN ISO 8676:2011-07 | Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) |
| DIN EN ISO 14586:2011-05 | Hexalobular socket countersunk head tapping screws (ISO 14586:2011) |
| DIN EN ISO 14587:2011-05 | Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2011) |
| DIN EN ISO 8673:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012) |
| DIN 6799:2017-06 | RETAINING WASHERS FOR SHAFTS |
| DIN 479:2016-08 | SQUARE HEAD BOLTS WITH SHORT DOG POINT |
| DIN 95:2016-12 | SLOTTED RAISED COUNTERSUNK (OVAL) HEAD WOOD SCREWS |
| DIN 444:2016-08 (Draft) | FASTENERS - EYE BOLTS |
| DIN 7992:2010-09 | T-head bolts with large head |
| DIN 935-1:2013-08 | Hexagon slotted and castle nuts - Part 1: Metric coarse and fine pitch thread, product grades A and B |
| DIN ISO 8992:2005-09 | Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
| DIN 547:2006-08 | Round nuts with drilled holes in one face |
| DIN 1479:2005-09 | Hexagon turnbuckles |
| DIN 318:2015-10 (Draft) | FASTENERS - WING SCREWS - EDGED WINGS |
| DIN EN ISO 4519:2016-08 | ELECTRODEPOSITED METALLIC COATINGS AND RELATED FINISHES - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES (ISO 4519:1980) |
| DIN 435:2000-01 | Square taper steel washers for use with I sections |
| DIN 1469:2012-05 | GROOVED PINS, HALF LENGTH GROOVED WITH GORGE |
| DIN EN ISO 4042:2001-01 | FASTENERS - ELECTROPLATED COATINGS |
| DIN EN ISO 10683:2016-07 (Draft) | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| DIN EN ISO 7042:2016-05 (Draft) | PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS - PROPERTY CLASSES 5, 8, 10 AND 12 (ISO 7042:2012) |
| DIN EN ISO 7047:2011-12 | Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011) |
| DIN EN ISO 7048:2011-07 | Cross-recessed cheese head screws (ISO 7048:2011) |
| DIN EN ISO 7090:2000-11 | PLAIN WASHERS, CHAMFERED - NORMAL SERIES, PRODUCT GRADE A |
| DIN EN ISO 7093-1:2000-11 | PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A |
| DIN EN ISO 4762:2004-06 | Hexagon socket head cap screws (ISO 4762:2004) |
| DIN EN ISO 14585:2011-05 | Hexalobular socket pan head tapping screws (ISO 14585:2011) |
| DIN EN ISO 1580:2011-12 | Slotted pan head screws - Product grade A (ISO 1580:2011) |
| DIN EN ISO 4034:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012) |
| DIN EN ISO 8674:2016-05 (Draft) | HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012) |
| DIN 34817:2001-04 | WELD SCREWS WITH METRIC THREAD |
| DIN 548:2007-01 | Round nuts with set pin holes in side |
| DIN 525:2009-11 | Studs for welding |
| DIN EN ISO 7380-1:2011-11 | Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011) |
| DIN 7604:2016-05 | HEXAGON HEAD SCREW PLUGS - LIGHT TYPE - CYLINDRICAL THREAD |
| DIN EN ISO 7050:2011-11 | Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011) |
| DIN 6928:2008-05 | HEXAGON HEAD TAPPING SCREWS WITH COLLAR |
| DIN 9925:2016-11 | ROUND WIRE SNAP RINGS FOR SHAFTS |
| DIN 1441:2009-08 | Washers for clevis pins - Product grade C |
| DIN 7989-2:2001-04 | Washers for steel structures - Part 2: Product grade A |
| DIN 440:2001-03 | Washers with square hole for use in timber constructions |
| DIN EN ISO 7049:2011-11 | Cross-recessed pan head tapping screws (ISO 7049:2011) |
| DIN HDBK 55 : 10ED 2013 | MECHANISCHE VERBINDUNGSELEMENTE 3 - TECHNISCHE LIEFERBEDINGUNGEN FUER SCHRAUBEN, MUTTERN UND UNTERLEGTEILE |
| DIN 480:2016-08 | SQUARE HEAD BOLTS WITH COLLAR AND SHORT POINT WITH ROUNDED END |
| DIN 2093:2013-02 | DISC SPRINGS - QUALITY SPECIFICATIONS - DIMENSIONS |
| DIN 908:2012-04 | INTERNAL DRIVE SCREW PLUGS WITH COLLAR - CYLINDRICAL THREAD |
| DIN 5903-2:2011-01 | Fish bolts - Part 2: With square head |
| DIN 604:2016-10 (Draft) | FLAT COUNTERSUNK HEAD NIB BOLTS |
| DIN EN ISO 12474:2011-01 | Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010) |
| DIN EN ISO 4032:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012) |
| DIN EN ISO 2010:2011-12 | Slotted raised countersunk head screws - Product grade A (ISO 2010:2011) |
| DIN EN ISO 7093-2:2000-11 | PLAIN WASHERS - LARGE SERIES - PART 2: PRODUCT GRADE C |
| DIN EN ISO 14584:2011-06 | Hexalobular socket raised countersunk head screws (ISO 14584:2011) |
| DIN EN ISO 2009:2011-12 | Slotted countersunk flat head screws - Product grade A (ISO 2009:2011) |
| DIN EN ISO 16426:2003-06 | FASTENERS - QUALITY ASSURANCE SYSTEM |
| DIN 21057-10:2015-07 (Draft) | PIPE CLASSES FOR PROCESS PLANTS - PART 10: TECHNICAL DELIVERY CONDITIONS FOR PIPE COMPONENTS OF NON-ALLOYED AND ALLOYED STEEL WITH SPECIFIED PROPERTIES AT ELEVATED TEMPERATURES OF MATERIAL GROUP 1.1 |
| DIN 316:2016-12 | FASTENERS - WING SCREWS - ROUNDED WINGS |
| DIN EN ISO 14582:2014-02 | FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013) |
| DIN 9926:2016-11 | ROUND WIRE SNAP RINGS FOR BORES |
| DIN 1587:2014-07 | Hexagon domed cap nuts, high type |
| KTA 3204 : 2015 | |
| DIN EN ISO 1482:2011-10 | Slotted countersunk (flat) head tapping screws (ISO 1482:2011) |
| DIN 467:2006-08 | Short knurled nuts |
| DIN HDBK 15-5 : 7ED 2013 | |
| DIN 97:2016-12 | SLOTTED COUNTERSUNK (FLAT) HEAD WOOD SCREWS |
| DIN 1445:2011-02 | Clevis pins with head and threaded portion |
| DIN EN ISO 7053:2011-11 | HEXAGON WASHER HEAD TAPPING SCREWS (ISO 7053:2011) |
| DIN 529:2010-09 | Masonry and foundation bolts |
| DIN EN ISO 10511:2016-05 (Draft) | PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT) (ISO 10511:2012) |
| DIN EN ISO 1207:2011-10 | Slotted cheese head screws - Product grade A (ISO 1207:2011) |
| DIN EN ISO 10513:2016-05 (Draft) | PREVAILING TORQUE TYPE ALL-METAL HEXAGON HIGH NUTS WITH METRIC FINE PITCH THREAD - PROPERTY CLASSES 8, 10 AND 12 (ISO 10513:2012) |
| DIN EN ISO 4033:2016-05 (Draft) | HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.