DIN EN ISO 18113-1:2013-01
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009)
Hardcopy , PDF
01-10-2024
English, German
01-01-2013
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Allgemeine Anforderungen an die Bereitstellung von
Informationen durch den Hersteller
4.1 Allgemeines
4.2 Sprache
4.3 Symbole und Identifikationsfarben
4.4 Werte und Nomenklatur
4.5 Mikrobiologischer Zustand
4.6 Gebrauchsanweisungen
4.7 Änderungen am In-vitro-Diagnostikum
4.8 Aufdecken von Restrisiken
4.9 Identifizierung von Bestandteilen
4.10 Unterstützung
Anhang A (informativ) Leistungsmermale von
In-vitro-Diagnostika
Literaturhinweise
This standard is included in DIN Handbook 378.
DocumentType |
Standard
|
Pages |
59
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
EN ISO 18113-1:2011 | Identical |
ISO 18113-1:2009 | Identical |
DIN EN ISO 18113-4:2013-01 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 4: In vitro diagnostic reagents for self-testing (ISO 18113-4:2009) |
DIN EN ISO 18113-3:2013-01 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 3: In vitro diagnostic instruments for professional use (ISO 18113-3:2009) |
DIN HDBK 378 : 3ED 2014 | |
DIN EN ISO 18113-2:2013-01 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 2: In vitro diagnostic reagents for professional use (ISO 18113-2:2009) |
DIN EN ISO 14971:2013-04 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007) |
DIN EN ISO 15223-1:2015-08 (Draft) | MEDICAL DEVICES - SYMBOLS TO BE USED WITH MEDICAL DEVICE LABELS, LABELLING AND INFORMATION TO BE SUPPLIED - PART 1: GENERAL REQUIREMENTS (ISO 15223-1:2016, CORRECTED VERSION 2017-03) |
DIN EN ISO 18113-5:2013-01 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5: In vitro diagnostic instruments for self-testing (ISO 18113-5:2009) |
DIN EN ISO 19001:2013-07 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER WITH IN VITRO DIAGNOSTIC REAGENTS FOR STAINING IN BIOLOGY (ISO 19001:2013) |
DIN EN ISO 15197:2015-12 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS (ISO 15197:2013) |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
DIN ISO 8601:2006-09 | DATA ELEMENTS AND INTERCHANGE FORMATS - INFORMATION INTERCHANGE - REPRESENTATION OF DATES AND TIMES |
ISO 10241:1992 | International terminology standards Preparation and layout |
ISO 1087-1:2000 | Terminology work Vocabulary Part 1: Theory and application |
ISO 15194:2009 | In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for certified reference materials and the content of supporting documentation |
DIN EN ISO 13485:2016-08 | Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016) |
DIN EN ISO 17511:2003-11 | In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003) |
EN 591 : 2001 | INSTRUCTIONS FOR USE FOR IN VITRO DIAGNOSTIC INSTRUMENTS FOR PROFESSIONAL USE |
DIN EN ISO 15197:2015-12 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS (ISO 15197:2013) |
ISO 15193:2009 | In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for content and presentation of reference measurement procedures |
ISO 15189:2012 | Medical laboratories — Requirements for quality and competence |
CLSI EP5 A2 : 2ED 2004 | EVALUATION OF PRECISION PERFORMANCE OF QUANTITATIVE MEASUREMENT METHODS |
IEC 60601-1-6:2010+AMD1:2013 CSV | Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
EN 592 : 2002 | INSTRUCTIONS FOR USE FOR IN VITRO DIAGNOSTIC INSTRUMENTS FOR SELF-TESTING |
CFR 21(PTS800-1299) : 0 | FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 800-1299 |
EN 13640:2002 | Stability testing of in vitro diagnostic reagents |
CLSI EP12 A2 : 2ED 2008 | USER PROTOCOL FOR EVALUATION OF QUALITATIVE TEST PERFORMANCE |
DIN ISO 5725-3:2003-02 | Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method (ISO 5725-3:1994 including Technical Corrigendum 1:2001) |
ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
EN 376 : 2002 | INFORMATION SUPPLIED BY THE MANUFACTURER WITH IN VITRO DIAGNOSTIC REAGENTS FOR SELF-TESTING |
DIN EN ISO 14971:2013-04 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007) |
CLSI GP10 A : 1ED 95(R2001) | ASSESSMENT OF THE CLINICAL ACCURACY OF LABORATORY TESTS USING RECEIVER OPERATING CHARACTERISTIC (ROC) PLOTS |
CLSI EP6 A : 1ED 2003 | EVALUATION OF THE LINEARITY OF QUANTITATIVE MEASUREMENT PROCEDURES - A STATISTICAL APPROACH |
ISO 15198:2004 | Clinical laboratory medicine — In vitro diagnostic medical devices — Validation of user quality control procedures by the manufacturer |
ISO 18153:2003 | In vitro diagnostic medical devices — Measurement of quantities in biological samples — Metrological traceability of values for catalytic concentration of enzymes assigned calibrators and control materials |
IEC 62366:2007+AMD1:2014 CSV | Medical devices - Application of usability engineering to medical devices |
DIN ISO 5725-1:1997-11 | Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994) |
ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
ISO 17511:2003 | In vitro diagnostic medical devices Measurement of quantities in biological samples Metrological traceability of values assigned to calibrators and control materials |
CLSI C28 A2 : 2ED 2000 | HOW TO DEFINE AND DETERMINE REFERENCE INTERVALS IN THE CLINICAL LABORATORY |
ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
ISO 15190:2003 | Medical laboratories Requirements for safety |
ISO 8601:2004 | Data elements and interchange formats Information interchange Representation of dates and times |
EN 375 : 2001 | INFORMATION SUPPLIED BY THE MANUFACTURER WITH IN VITRO DIAGNOSTIC REAGENTS FOR PROFESSIONAL USE |
ISO Guide 30:2015 | Reference materials — Selected terms and definitions |
CLSI EP32 R : 1ED 2006 | METROLOGICAL TRACEABILITY AND ITS IMPLEMENTATION |
CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
CLSI EP17 A : 1ED 2004 | PROTOCOLS FOR DETERMINATION OF LIMITS OF DETECTION AND LIMITS OF QUANTITATION |
ISO 17593:2007 | Clinical laboratory testing and in vitro medical devices Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
IEC 60359:2001 | Electrical and electronic measurement equipment - Expression of performance |
DIN 820-120:2012-09 | STANDARDIZATION - PART 120: GUIDELINES FOR THE INCLUSION OF SAFETY ASPECTS IN STANDARDS (ISO/IEC GUIDE 51:1999) |
ISO 14971:2007 | Medical devices Application of risk management to medical devices |
ISO 704:2009 | Terminology work — Principles and methods |
CLSI EP7 A2 : 2ED 2005 | INTERFERENCE TESTING IN CLINICAL CHEMISTRY |
ISO 15223-1:2016 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements |
ISO 15197:2013 | In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus |
EN 980:2008 | Symbols for use in the labelling of medical devices |
CLSI EP9 A2 : 2ED 2002 | METHOD COMPARISON AND BIAS ESTIMATION USING PATIENT SAMPLES |
IEC 60050-300:2001 | International Electrotechnical Vocabulary (IEV) - Part 300: Electrical and electronic measurements and measuring instruments - Part 311: General terms relating to measurements - Part 312: General terms relating to electrical measurements - Part 313: Types of electrical measuring instruments - Part 314: Specific terms according to the type of instrument |
ISO 5725-5:1998 | Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method |
ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.