DIN EN ISO 15618-2:2002-04
Current
The latest, up-to-date edition.
APPROVAL TESTING OF WELDERS FOR UNDER-WATER WELDING - PART 2: DIVER-WELDERS AND WELDING OPERATORS FOR HYPERBARIC DRY WELDING
Hardcopy , PDF
English, German
01-01-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
4.1 General
4.2 Test piece
4.3 Consumable
4.4 Miscellaneous
5 Essential variables for approval testing
5.1 General
5.2 Welding processes
5.3 Joint types (butt and fillet welds)
5.4 Material groups
5.5 Consumables
5.6 Dimensions
5.7 Welding positions
5.8 Hyperbaric environment
6 Range of approval
6.1 General
6.2 Welding process
6.3 Joint types
6.4 Material groups
6.5 Consumables
6.6 Dimensions
6.7 Welding positions
6.8 Hyperbaric environment
7 Examination and testing
7.1 General
7.2 Supervision
7.3 Shapes and dimensions of test pieces
7.4 Welding conditions
7.5 Test methods
7.6 Test pieces and test specimens
8 Acceptance requirements for test pieces
9 Re-tests
10 Period of validity
10.1 Initial approval
10.2 Prolongation
11 Certificate
12 Designation
Annex A (informative) Diver-welder or welding
operator test certificate for hyperbaric dry welding
Annex B (informative) Job Knowledge
Describes essential requirements, range of approval, test conditions, acceptance requirements and certification for the approval testing of diver-welder or welding operator performance for welding of steels underwater in a hyperbaric dry environment.
| DocumentType |
Standard
|
| Pages |
27
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| NF EN ISO 15618-2 : 2002 | Identical |
| UNI EN ISO 15618-2 : 2003 | Identical |
| BS EN ISO 15618-2:2002 | Identical |
| NS EN ISO 15618-2 : 1ED 2002 | Identical |
| NEN EN ISO 15618-2 : 2002 | Identical |
| ISO 15618-2:2001 | Identical |
| I.S. EN ISO 15618-2:2002 | Identical |
| NBN EN ISO 15618-2 : 2002 | Identical |
| SN EN ISO 15618-2 : 2001 | Identical |
| UNE-EN ISO 15618-2:2002 | Identical |
| EN ISO 15618-2:2001 | Identical |
| DIN EN ISO 5817:2006-10 | WELDING - FUSION-WELDED JOINTS IN STEEL, NICKEL, TITANIUM AND THEIR ALLOYS (BEAM WELDING EXCLUDED) - QUALITY LEVELS FOR IMPERFECTIONS (ISO 5817:2014) |
| EN ISO 6520-1:2007 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007) |
| ISO 3581:2016 | Welding consumables — Covered electrodes for manual metal arc welding of stainless and heat-resisting steels — Classification |
| EN 288-1:1992/A1:1997 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES FOR FUSION WELDING |
| EN 1321:1996 | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds |
| CR ISO 15608 : 2000 | WELDING - GUIDELINES FOR A METALLIC MATERIAL GROUPING SYSTEM |
| EN ISO 6947:2011 | Welding and allied processes - Welding positions (ISO 6947:2011) |
| EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
| EN 910 : 1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS |
| EN 288-2:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING |
| ISO 857-1:1998 | Welding and allied processes Vocabulary Part 1: Metal welding processes |
| EN 1600:1997 | Welding consumables - Covered electrodes for manual arc welding of stainless and heat resisting steels - Classification |
| EN 499 : 1994 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
| EN 571-1:1997 | Non destructive testing - Penetrant testing - Part 1: General principles |
| EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
| EN 970:1997 | Non-destructive examination of fusion welds - Visual examination |
| EN 1290:1998/A2:2003 | NON-DESTRUCTIVE EXAMINATION OF WELDS - MAGNETIC PARTICLE EXAMINATION OF WELDS |
| EN 1320:1996 | Destructive tests on welds in metallic materials - Fracture test |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.