DIN EN 927-3:2012-10
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST
Hardcopy , PDF
07-03-2021
English
01-01-2012
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Kurzbeschreibung
4 Geräte und Prüfmittel
5 Probenahme
6 Probenplatten
7 Durchführung
8 Auswertung und Prüfbericht
Anhang A (normativ) Internes Vergleichsprodukt (ICP),
Alkydharzlasur
Anhang B (normativ) Einzelheiten der Prüfverfahren
Anhang C (normativ) Bewertungsanforderungen für
beschichtete Platten und ICP
Anhang D (informativ) Empfohlenes Formular für einen Prüfbericht
Anhang E (informativ) Freiwillige Prüfungen mit
Abweichungen von der Norm-Bewitterungsprüfung,
um zusätzliche Angaben über das Verhalten von
Beschichtungen zu erhalten
Anhang F (informativ) Erläuterungen
This standard is included in DIN Handbook 400.
| DevelopmentNote |
DRAFT 2018 issued in May 2018. (06/2018)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NEN EN 927-3 : 2012 | Identical |
| BS EN 927-3:2012 | Identical |
| NS EN 927-3 : 2012 | Identical |
| I.S. EN 927-3:2012 | Identical |
| EN 927-3:2012 | Identical |
| NBN EN 927-3 : 2012 | Identical |
| NF EN 927-3 : 2012 | Identical |
| UNI EN 927-3 : 2012 | Identical |
| SN EN 927-3 : 2012 | Identical |
| ONORM EN 927-3 : 2012 | Identical |
| UNE-EN 927-3:2013 | Identical |
| DIN HDBK 400 : 2ED 2014 | BEWITTERUNG - 48 NORMEN ZUR NATUERLICHEN UND KUENSTLICHEN BEWITTERUNG IM ORIGINALTEXT |
| EN ISO 4628-2:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
| EN ISO 2431:2011 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
| EN ISO 4628-1:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2016) |
| EN ISO 11664-4:2011 | Colorimetry - Part 4: CIE 1976 L*a*b* Colour space (ISO 11664-4:2008) |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| ISO 11664-4:2008 | Colorimetry Part 4: CIE 1976 L*a*b* Colour space |
| EN ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2013) |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN 927-1:2013 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 1: Classification and selection |
| EN ISO 4628-4:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016) |
| ISO 4628-4:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 2810:2004 | Paints and varnishes Natural weathering of coatings Exposure and assessment |
| EN ISO 1513:2010 | Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
| ISO 4628-5:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
| ISO 4628-1:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system |
| EN ISO 4628-6:2011 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2011) |
| EN 927-2:2014 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 4628-6:2011 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
| EN ISO 2810:2004 | Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2004) |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
| EN ISO 4628-5:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
| ISO 2813:2014 | Paints and varnishes — Determination of gloss value at 20°, 60° and 85° |
| EN ISO 2813:2014 | Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
| ISO 2431:2011 | Paints and varnishes Determination of flow time by use of flow cups |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.