DIN EN 61268 : 1996
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ALTERNATING CURRENT STATIC VAR-HOUR METERS FOR REACTIVE ENERGY (CLASSES 2 AND 3)
01-11-2003
12-01-2013
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
3.1 Allgemeine Begriffe
3.2 Begriffe für die Funktionselemente
3.3 Begriffe für mechanische Funktionselemente
3.4 Begriffe der Isolation
3.5 Begriffe der Zähler-Nenngrössen
3.6 Begriffe der Einflussgrössen
3.7 Begriffe der Prüfungen
4 Anforderungen
4.1 Genormte elektrische Werte
4.2 Mechanische Anforderungen
4.3 Klimatische Bedingungen
4.4 Elektrische Anforderungen
4.5 Elektromagnetische Verträglichkeit (EMV)
4.6 Anforderungen an die Genauigkeit
5 Prüfungen und Prüfbedingungen
5.1 Allgemeine Prüfbedingungen
5.2 Prüfung der mechanischen Anforderungen
5.3 Prüfung von klimatischen Umgebungseinflüssen
5.4 Prüfung der elektrischen Anforderungen
5.5 Prüfung der elektromagnetischen
Verträglichkeit (EMV)
5.6 Prüfungen auf Einhalten der
Genauigkeitsanforderungen
Anhang A (normativ) Beziehung zwischen der
Umgebungslufttemperatur und relativer
Luftfeuchte
Anhang B (normativ) Prüfschaltung für den
Gleichstrom-Einfluss
Anhang C (normativ) Wellenform der Spannung für die
Prüfungen der Wirkung von Einbrüchen und
Unterbrechungen der Spannung
Anhang D (normativ) Elektromagnet für die Prüfung der
Beeinflussung durch äussere Magnetfelder
Anhang E (informativ) Geometrische Darstellung von
Wirk- und Blindleistung
Anhang F (informativ) Prüfplan
Anhang ZA (normativ) Normative Verweisungen auf
internationale Publikationen mit ihren
entsprechenden europäischen Publikationen
Anhang ZB (normativ) Besondere nationale Bedingungen
Refers only to newly manufactured static var-hour meters of accuracy classes 2 and 3 for measuring alternating current electrical reactive energy in frequency range 45Hz and 65Hz, for type testing only.
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 61268:1996 | Identical |
| NBN EN 61268 : 1996 | Identical |
| SN EN 61268 : 1996 | Identical |
| I.S. EN 61268:1999 | Identical |
| NF EN 61268 : 1996 | Identical |
| EN 61268:1996 | Identical |
| BS EN 61268:1996 | Identical |
| VDE 0418-20 : 1996 | Corresponds |
| IEC 61268:1995 | Identical |
| VDE 0418-20 : 1996 | Identical |
| VDE 0418-3-31 : 1999 | ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS - PART 31: PULSE OUTPUT DEVICES FOR ELECTROMECHANICAL AND ELECTRONIC METERS (TWO WIRES ONLY) |
| DIN EN 62053-31 : 1999 | ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS - PART 31: PULSE OUTPUT DEVICES FOR ELECTROMECHANICAL AND ELECTRONIC METERS (TWO WIRES ONLY) |
| DIN EN 61036 : 2001 | ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| IEC 60038:2009 | IEC standard voltages |
| DIN EN 60068-2-2 : 1995 | ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT |
| IEC 60068-2-5:2010 | Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing |
| DIN IEC 60038 : 2002 | IEC STANDARD VOLTAGES |
| IEC 60695-2-1:1991 | Fire hazard testing - Part 2: Test methods - Section 1: Glow-wire test and guidance |
| DIN IEC 60068-2-30:1986-09 | ELECTRICAL ENGINEERING - BASIC ENVIRONMENTAL TESTING PROCEDURES - TEST DB AND GUIDANCE - DAMP HEAT, CYCLIC (12 + 12 HOUR CYCLE) |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEC TR 60736:1982 | Testing equipment for electrical energy meters |
| IEC 60145:1963 | Var-hour (reactive energy) meters |
| DIN VDE 0470-1 : 1992 | |
| DIN IEC 60068-2-5:1982-11 | BASIC ENVIRONMENTAL TESTING PROCEDURES; PART 2: TESTS; TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL |
| DIN IEC 60359:1993-09 | EXPRESSION OF THE PERFORMANCE OF ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT |
| IEC 60801-4:1988 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 4: Electrical fast transient/burst requirements |
| IEC 60068-2-11:1981 | Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist |
| DIN IEC 60068-2-11:1982-08 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST KA: SALT MIST |
| IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV | Low-voltage fuses - Part 1: General requirements |
| ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
| IEC 60817:1984 | Spring-operated impact-test apparatus and its calibration |
| DIN EN 60068-2-1 : 1995 | ENVIRONMENTAL TESTING - PART 2-1: TESTS - TEST A: COLD |
| CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| DIN EN 60068-2-27 : 1995 | ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK |
| DIN IEC 60085 : 1993 | THERMAL EVALUATION AND CLASSIFICATION OF ELECTRICAL INSULATION |
| IEC 60375:2003 | Conventions concerning electric and magnetic circuits |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| DIN VDE 0636-10 : 1992 | LOW-VOLTAGES FUSES; GENERAL REQUIREMENTS |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| DIN EN 55022 : 2011 COR 1 2016 | INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008, MODIFIED) |
| IEC 60801-3:1984 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 3: Radiated electromagnetic field requirements |
| IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV | Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations |
| IEC 60359:2001 | Electrical and electronic measurement equipment - Expression of performance |
| IEC 60186:1987 | Voltage transformers |
| DIN EN 60514 : 1995 | ACCEPTANCE INSPECTION OF CLASS 2 ALTERNATING-CURRENT WATT-HOUR METERS |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| DIN EN 61000-4-2 : 2009 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST |
| DIN IEC 60060-1 : 1994 | HIGH VOLTAGE TEST TECHNIQUES - GENERAL SPECIFICATIONS AND TEST REQUIREMENTS |
| IEC 60387:1992 | Symbols for alternating-current electricity meters |
| DIN EN ISO 75-2:2013-08 | PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 2: PLASTICS AND EBONITE (ISO 75-2:2013) |
| DIN EN 60387:1993-11 | SYMBOLS FOR ALTERNATING-CURRENT ELECTRICITY METERS |
| IEC 61036:1996+AMD1:2000 CSV | Alternating current static watt-hour meters for active energy (classes 1 and 2) |
| IEC 60801-2:1991 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 2: Electrostatic discharge requirements |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.