DIN EN 607:2005-02
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
Hardcopy , PDF
01-04-2024
English, German
01-02-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Werkstoff
4.1 Rohstoff
4.2 Verwendung von gebrauchtem Werkstoff
5 Allgemeine Anforderungen an Profile - Aussehen
6 Geometrische Eigenschaften von Profilen
6.1 Breite
6.2 Länge
7 Physikalische und mechanische Eigenschaften von Profilen
8 Allgemeine Eigenschaften von Zubehörteilen
8.1 Allgemeines
8.2 Aussehen
8.3 Formen und Masse
9 Physikalische Eigenschaften von Zubehörteilen
10 Dichtungsringe von Dachrinnen
12 Bezeichnung
13 Kennzeichnung
14 Gebrauchstauglichkeit von Dachrinnen-Systemen
15 Produktionskontrolle
Anhang A (normativ) Verwendung von gebrauchten Werkstoffen
A.1 Werkstoffdefinitionen
A.1.1 Ungebrauchter Werkstoff
A.1.2 Eigener wiederverwendbarer Werkstoff
A.1.3 Fremder wiederverwendbarer Werkstoff
A.1.4 Wiederaufbereiteter Werkstoff
A.2 Wiederverwendbarer und wiederaufbereiteter Werkstoff
A.2.1 Eigener wiederverwendbarer Werkstoff
A.2.2 Fremde wiederverwendbare und wiederaufbereitete
Werkstoffe mit vereinbarter Spezifikation
A.2.3 Fremde wiederverwendbare und wiederaufbereitete
Werkstoffe, die nich Teil einer vereinbarten
Spezifikation sind
Anhang B (normativ) Schlagprüfung
Anhang C (normativ) Prüfung des Wärmeschrumpfverhaltens
von Zubehörteilen
Anhang D (normativ) Prüfung der Wasserdichtheit
Anhang E (informativ) Querschnittsflächen
Literaturhinweise
This standard is included in DIN Handbook 13-1 and 13-2. Specifies requirements and test methods of eaves gutters and fittings made from unplasticized polyvinyl chloride (PVC-U) and intended to be used for rainwater drainage.
| DevelopmentNote |
Supersedes DIN 18469. (07/2002)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 607 : 2005 | Identical |
| UNI EN 607 : 2005 | Identical |
| BS EN 607:2004 | Identical |
| NBN EN 607 : 2005 | Identical |
| UNE-EN 607:2006 | Identical |
| NS EN 607 : 2ED 2004 | Identical |
| EN 607:2004 | Identical |
| NF EN 607 : 2005 | Identical |
| SN EN 607 : 2004 | Identical |
| I.S. EN 607:2004 | Identical |
| NEN EN 607 : 2004 | Identical |
| DIN HDBK 13-1 : 16ED 2018 | ABWASSERTECHNIK 1 - GEBAEUDE- UND GRUNDSTUECKSENTWAESSERUNG - ENTWAESSERUNGSGEGENSTAENDE |
| DIN 18339:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - SHEET METAL ROOFING AND WALL COVERING WORK |
| DIN HDBK 13-2 : 11ED 2017 | ABWASSERTECHNIK 2 - ROHRE UND FORMSTUECKE FUER DIE GEBAEUDEENTWAESSERUNG |
| DIN 1986-100:2016-12 | DRAINAGE SYSTEMS ON PRIVATE GROUND - PART 100: SPECIFICATIONS IN RELATION TO DIN EN 752 AND DIN EN 12056 |
| EN 12200-1:2016 | Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| EN ISO 1183-3:1999 | Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999) |
| EN ISO 8256:2004 | Plastics - Determination of tensile-impact strength (ISO 8256:2004) |
| EN ISO 4892-3:2016 | Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016) |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| ISO 8256:2004 | Plastics — Determination of tensile-impact strength |
| EN 743 : 1994 | PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF THE LONGITUDINAL REVERSION |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| EN 763 : 1994 | PLASTICS PIPING AND DUCTING SYSTEMS - INJECTION MOULDED THERMOPLASTICS FITTINGS - TEST METHOD FOR VISUALLY ASSESSING EFFECTS OF HEATING |
| EN 922:1994 | Plastics piping and ducting systems - Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) - Specimen preparation for determination of the viscosity number and calculation of the K-value |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 4892-3:2016 | Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps |
| EN 727:1994 | Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST) |
| ISO 1183-3:1999 | Plastics Methods for determining the density of non-cellular plastics Part 3: Gas pyknometer method |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| EN 638 : 1994 | PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES |
| EN 20105-A02:1994 | Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993) |
| EN 1905:1998 | Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content |
| ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| EN 513:1999 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.